About the T-Spec 4RAK Installation Kit
Power up to specification
Power up to specification
This 4RAK amplifier wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 4-gauge power and ground wires, an 18-gauge turn-on lead, 12-gauge speaker wire, a 17-foot stereo patch cable, a fuse holder, and an assortment of hardware useful for your installation. T-Spec Competition Rated Car Audio makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.
Oxygen-free virgin copper
Recycled copper often contains impurities that can impair conductivity, so T-Spec uses only oxygen-free non-recycled virgin copper in all their wire to maximize signal and power flow. The high strand count and special PVC blended jacket give T-Spec wire an extraordinary flexibility, making installation easier. The power and ground wires in this kit each come with a sturdy ring terminal machine-crimped to one end, ensuring a secure contact with your car's battery and chassis ground. T-Spec even pre-installed the fuse holder (with an 80-amp fuse included) inline on the power wire, for your safety and peace of mind
.
Product highlights:
- amplifier wiring kit
- all wires made of oxygen-free non-recycled copper
- wires meet all ANSI and CEA standards
- 17 feet of 4-gauge matte pearl power cable with ring terminal
- 3 feet of 4-gauge matte gray ground wire with ring terminal
- 17-foot 2-channel RCA patch cable (double twisted pair for superior noise reduction)
- 12 feet of 12-gauge black and white speaker wire
- 17 feet of 18-gauge blue turn-on lead wire
- brass mini-ANL fuse holder with 80-amp fuse installed on power wire
- comes with an assortment of hardware including wire ties, a firewall bushing, and various crimp-on wire terminals
- warranty: 1 year
- MFR # V10-4RAK
What's in the box:
- 17' v10 4 AWG OFC multi-strand power wire in a matte pearl white PVC blended jacket
- In-line v12 compact brass MANL (Mini ANL) fuse holder with an 80A MANL fuse (installed)
- 3' v10 4 AWG OFC multi-strand ground wire in a matte gray PVC blended jacket
- 17' 18 AWG OFC remote turn-on wire in a blue jacket
- 17' v10 RCA cable in matte pearl white PVC blended jacket
- 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket
- Two 4 AWG crimp-on spade terminals with white (power) and silver (ground) boots
- Four 12 AWG crimp-on spade speaker wire terminals (amplifier side)
- Four 12 AWG crimp-on quick-slide terminals (female)
- Red 18 AWG crimp-on spade terminal
- Red 18 AWG butt connector
- Firewall bushing for 4 AWG wire
- 8 Wire ties (3.5" length)
Customer reviews for T-Spec 4RAK Installation Kit
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the T-Spec 4RAK Installation Kit
Product Research
Features
Overview: This T-Spec v10-series amplifier wiring kit contains enough power and ground wire, speaker wire, turn-on wire, and connection accessories to install a single amplifier in most vehicles. The OFC (oxygen-free copper) wire included in this kit meets CEA-2015 and ANSI specification for wire gauge, and is BC-5W2 marine compliant. The high strand count gives you maximum flexibility and maximum conductivity to give your components the greatest current capability.
Contents: This v10-series amplifier kit contains the following:
- Power Wire: 17' v10 4 AWG OFC multi-strand wire in a matte pearl white PVC blended jacket. The wire has an in-line v12 compact brass MANL (Mini ANL) fuse holder with an 80A MANL fuse. The battery end of the wire is terminated with a nickel-plated crimp-on ring terminal with a white boot and an 8.5mm hole.
- Ground Wire: 3' v10 4 AWG OFC multi-strand wire in a matte gray PVC blended jacket. One end is terminated with a nickel-plated crimp-on ring terminal with a silver boot and an 8.5mm hole.
- Turn-On Wire: 17' 18 AWG OFC remote turn-on wire in a blue jacket. Both ends are un-terminated.
- RCA Cable: 17' v10 noise-rejecting, braided 3-conductor RCA cable with precision machined ends and quad-split tip.
- Speaker Wire: 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket. The white jacketed conductor is square in shape, and is marked for positive (+) connection. The gray jacketed conductor is round in shape, and is unmarked.
- Installation Accessories:
- Two 4 AWG crimp-on spade terminals with white (power) and silver (ground) boots for amplifier connection
- Four 12 AWG crimp-on spade terminals for speaker wire connection (amplifier side)
- Four 12 AWG crimp-on quick-slide terminals (female) for speaker wire connection (speaker side)
- Red 18 AWG crimp-on spade terminals and red butt connector for remote turn-on wire connection
- Firewall bushing for 4 AWG wire
- 8 Wire ties (3.5" length)
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Used this amp install kit on my alpine 500x1 amp running my JL Audio 12" W3V3. Thought the wire gauge was to thick but it works perfectly.
Jauman79 from Harleysville, PA