This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.
First, attach the color-coded wires on your Crutchfield-supplied harness to the wires from your new stereo. If you don't know how to use a soldering iron, we recommend that you purchase some wire connectors that you'll use to attach the Crutchfield-supplied harness to your factory harness.
Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness makes installing your new stereo easier, and allows you to put the factory radio back when you sell your vehicle or return it at the end of the lease. A detailed instruction sheet comes with the harness. Warranty: 60 days.
Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering wheel control connections. You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.
Notes: The 12V constant power lead may not be present in your car. If not, and your receiver requires a constant 12V memory lead (most do), run a wire directly to the battery or an appropriate un-switched fuse. To connect the power and ground connection plug, you'll disconnect the cigarette lighter, plug one end of the Crutchfield harness into the lighter, and the other end into the vehicle's harness. If your vehicle has a power antenna, you'll need to connect the new receiver's antenna turn-on lead to the female spade connector in your vehicle. This connector will be on the end of a blue wire which may be covered with black tubing.
See more info on this item
12V switched power
left front speaker +/-
right front speaker +/-
left rear speaker +/-
right rear speaker +/-
Note: Most vehicles will require additional installation parts please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.