About the Metra 70-7304 Receiver Wiring Harness
Metra 70-7304 Receiver Wiring Harness
Metra 70-7304 Receiver Wiring Harness
This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.
First, attach the color-coded wires on your Crutchfield-supplied harness to the wires from your new stereo. If you're not using a soldering iron, we recommend that you purchase some wire connectors to secure the connections. Check out our handy article on three ways to connect the wiring harness here.
Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness saves installation time since you won't have to cut factory wires individually, and this also enables you to re-install the factory radio if needed. A detailed instruction sheet comes with the harness. Warranty: 1 year.
Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate navigation or video connections. You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.
What's in the box:
Metra 70-7304 Receiver Wiring Harness owner's manual
- 8" Power harness
- 8" Speaker harness
Customer reviews for Metra 70-7304 Receiver Wiring Harness
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Metra 70-7304 Receiver Wiring Harness
Product Research
Features
Wiring Harness: This wiring harness prevents you from having to cut your vehicle's factory radio plug when replacing your factory radio with an aftermarket head unit. Simply solder or crimp the wiring harness to your aftermarket head unit's harness (solder & crimps not included), plug the aftermarket head unit's plug into the rear chassis of the aftermarket head unit, and plug the wiring harness into your vehicle's factory radio plug.
Wire Code Chart:
Wire Color | Function |
---|---|
Red | +12 Volt Accessory |
Yellow | +12 Volt Constant |
Black (thick) | Chassis Ground |
Black (thin) | Steering Wheel Control Ground |
Green/Orange | Steering Wheel Control Signal |
Blue/Pink | Vehicle Speed Sensor |
(Speaker Harness)
Wire Color | Function |
---|---|
Blue | Power Antenna |
Orange | Illumination |
White | Left Front Speaker + |
White/Black | Left Front Speaker - |
Gray | Right Front Speaker + |
Gray/Black | Right Front Speaker - |
Green | Left Rear Speaker + |
Green/Black | Left Rear Speaker - |
Violet | Right Rear Speaker + |
Violet/Black | Right Rear Speaker - |
Loading...
Loading accessories...
Customer Q&A
10 questions already asked
Loading...
Loading articles...
Fit perfectly with my OEM connectors. The cables are colored following the standard code, so it's very probable that they'll match with your new head unit ones.
Wilfredo from Aguadilla, PR