Metra 82-3412 Speaker Mounting Brackets

Install 5-1/4" or 6-1/2" speakers in select vehicles

Item #: 120823412

In Stock

62 Reviews | Ask Questions

Your price: $12.99 Earn up to 13 Rewards points

Add to Cart

+ Add to wishlist + Email me alerts for this product

View all associated offers

1.888.955.6000

Email

Chat

Does it fit my car?

Select your car

Find what fits your car

Loading...

Metra 82-3412

Metra's 82-3412 brackets will allow you to install select 5-1/4" or 6-1/2" speakers in the factory speaker openings of many vehicles. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to confirm that these adapters are compatible with your vehicle. Warranty: 60 days.

Important Note: Some 6-1/2" speakers use a larger frame and require a larger cutout. We call these 6-3/4" speakers, and they won't fit in this bracket. This bracket will only work with speakers that require a cutout diameter of 5-1/8" or less.

Note: Most vehicles will require additional installation parts — please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.

Hands-on research

What's in the box?

Download owner's manual

  • Two speaker adapter brackets
  • Six 1/2" Screws
  • 6 Speed clips
  • Instructions

Product Research

Features

Overview: The 82-3412 bracket is designed to allow easy replacement of factory speakers with select aftermarket 6-1/2 and 5-1/4 speakers. (Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.)

6-1/2 Speakers: 6-1/2 speakers with the 3-hole bolt pattern or the symmetrical 4-hole bolt pattern can be mounted using the tabs around the inner speaker opening of this bracket (if the hole spacing matches).

5-1/4 Speakers: The frame diameter of a some 5-1/4s is smaller than the brackets' cutout; in these cases a speaker baffle should be used to seal the rear of the speaker.

Dimensions:

  • Cutout Diameter: 5.08"
  • Height: 0.5"
  • Three-Hole Spacing (6-1/2): 4.54"-4.89"
  • Four-Hole Spacing (5-1/4):
    • Perimeter: 3.72"-4"
    • Diagonal: 5.25"-5.65"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Metra 82-3412 Speaker Mounting Brackets Reviews

Average Customer Review:

62 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Metra 82-3412 Speaker Mounting Brackets

Written By nikwah, long island on Sunday, December 21, 2014

Crutchfield Customer Review (What's this?)

Mount fit speakers

Pros: Fit speakers

Cons: Some drilling required

Worked perfectly.

Written By Dick B, Syracuse, NY on Sunday, November 23, 2014

Crutchfield Customer Review (What's this?)

Perfect fit in my 07' Honda Fit, had to snap 2 tabs off each ring...you can do it by hand. Screw the speaks to the rings, drill a few hole in the door, screw the rings to the door and you're done. I did all 4 doors this morning in under an hour.

Metra 82-3412 Speaker Mounting Brackets

Written By Anonymous, spfld ohio on Sunday, November 02, 2014

Crutchfield Customer Review (What's this?)

amazing

Very Good Brackets

Written By Andrei, Bethesda, MD. on Tuesday, October 21, 2014

Crutchfield Customer Review (What's this?)

Fit my '99 Toyota Corolla just fine; thick and durable plastic construction.

Pros: 5 mounting eyelets allowing for flexible mounting and sure to fit at least three holes on your door. Sturdy plastic construction.

Excellence

Written By Daniel, Madison WI on Sunday, September 28, 2014

Crutchfield Customer Review (What's this?)

So, a customer service representative shipped me an order because i explained that i received the wrong product. The catch is that It may have been my fought. Not only that, but enclosed were an instruction manual (that was printed and detailed)I didn't ask for detailing step by step instructions on how to use the product. The manual was researched, not from the manufacturer. Thank you guys. Oh, I got the shipment in 2my days

Pros: Expeditious, informative, patient, couteous, respectful, helpful, easy to contact.

Cons: Dont have a instantaneous teleporting molecular modulator that ship orders in a milisecond

Perfect

Written By Phil, Missouri on Tuesday, August 26, 2014

Crutchfield Customer Review (What's this?)

Made installation easy

Pros: Easy

Cons: none

Metra to the rescue!

Written By MercMan, Charlotte, NC on Monday, August 18, 2014

Crutchfield Customer Review (What's this?)

I was totally bummed when I removed the old factor speaker and saw the odd shape. I thought I would need custom fabricated brackets but I found these on Crutchfield. The mounting holes didn't all line up but apparently it was said in the documentation that I may have to drill a new mounting hole. (I missed that part) Other than that I am happy. I only used two of the three mounting hole because I didn't want to drill in the car. Seems to be okay.

Pros: Easy to install.

Cons: May not line up exactly causing you to drill.

Mounting brackets

Written By TCS505, Corrales, New Mexico on Monday, August 11, 2014

Crutchfield Customer Review (What's this?)

Great product to have when up grading from the factory speakers!

Cons: Easy installation, very straight forward. Quality of product was good!

Quality mount.

Written By Jamie, Derry, NH on Saturday, June 14, 2014

Crutchfield Customer Review (What's this?)

I didn't end up needing them but the quality is good. Strong, beefy plastic. I would up giving them to a friend who used them in his Volkswagen.

Pros: Solid construction, versatility.

Cons: You will probably need to do some cutting depending on where you are putting them. Not really a con, just a side effect of the design being for so many applications.

Ued for Honda Civic 03

Written By Klaus H., Hollywood, FL on Friday, May 30, 2014

Crutchfield Customer Review (What's this?)

The mounts are great. Fit the Honda Civic in the back perfectly.

Pros: - Free - Something to hold your speakers. - Customize able - Comes with a lot of screws and connectors

Cons: None

Beefy bracket

Written By Jason, Pennsylvania on Friday, May 30, 2014

Crutchfield Customer Review (What's this?)

These brackets are really beefy and feel likegreat quality.. And best part is the were free

Pros: Free, great quality

Yay

Written By Silvan, Bikini Bottom on Friday, April 18, 2014

Crutchfield Customer Review (What's this?)

Good job guys!

Pros: Good

Necessary for installation, and worked well.

Written By Kevin P, Boonville, MO on Wednesday, April 02, 2014

Crutchfield Customer Review (What's this?)

Adapted speakers perfectly for the non-standard cut-outs in my Prizm. Took some trial and error to find best way (orientation) to mount speakers to them. Also, my trim panels would not fit over them without cutting off all of the extra tabs. But they fit just right.

Pros: Fit my openings perfectly. Could not have installed speaker without them.

Cons: Had to cut every one of the unused tabs off to get flush fit.

Not direct fit.

Written By Jason, New England on Sunday, March 23, 2014

Crutchfield Customer Review (What's this?)

I got these these for free with my speaker purchase for a 2007 Subaru Legacy. They are not direct fit! I had to do some modifying so the wouldn't bounce off the door. I couldn't get a flush fit from the bracket to the door otherwise there would be a gap between them without modification. What can you expect for free I guess.

Pros: Free with purchase.

Cons: Not direct fit for my car.

Made Installation simple

Written By Michael, Mount Airy, NC on Saturday, March 15, 2014

Crutchfield Customer Review (What's this?)

Got these with 2 pairs of Kenwood Kfc-1665s speakers. They were included for free by Crutchfield. These are a must for installing on a 2012 Ford Focus. Very simple to use. Didn't have to chop up factory speakers to install the Kenwoods.

Pros: Simplicity of use.

Cons: None

fast shipping

Written By lecarmat, corona ca on Sunday, February 02, 2014

Crutchfield Customer Review (What's this?)

Great item, fast shipping, perfect packaging. Why 3 stars? Did not fit the 6 1/2 Kicker speakers I bought them for.

Pros: Crutchfield!!!

Cons: Do your research and ask more questions!!!! I didn't!

Perfect with a few modifications!

Written By RadarMan, Martinsburg, WV on Friday, January 03, 2014

Crutchfield Customer Review (What's this?)

These were the recommended speaker adapters for my daughters 2004 Honda Civic EX. Crutchfield warned me that drilling was required, which it was, but that wasn't all that was needed. The Honda factory door speaker had no screws at all, rather a clip on the top and two slots in the bottom. This makes for easy replacement of new factory speakers but a challenge for after-market speakers. I read on one of the Crutchfield reviews for this item when used on a Honda Civic that installation went smooth until reinstalling the door skin that no longer fit. Armed with this knowledge, I had to first trace around the factory speaker to find the "center" of the speaker hole. Then I had to cut off the two "large" tabs on the bottom of the bracket and about half off of the top "large" tab and install the speaker onto the bracket with screws that came with speakers. I also had to cut the screws that held the speaker to the bracket so that they didn't extend past the bottom of the bracket. Then I aligned the speaker bracket with the factory trace left on door, marked holes for the two small tabs on bottom of bracket and the bottom half of the large tab on top. Using the supplied door clips wasn't an option. I had to us the screws supplied with the bracket as sheet metal screws to attach the assembly to the door. So be very carefull when choosing a drill bit. Using this proceedure I was able to install my speakers and still have the door skin properly fit. Thanks Crutchfield!!

Pros: Strong, sturdy bracket. Worked well with modifications.

Cons: Wasn't really made for Honda cars. But Honda doors are not at all made for aftermarket door speakers either.

Brackets Often Required

Written By ReneN, Blacksburg, VA on Friday, December 27, 2013

Crutchfield Customer Review (What's this?)

Used these for installing Infinity Speakers in a 2007 Honda Fit. Did still require drilling into the vehicle to mount the brackets, but the existing speaker locations clearly weren't designed for aftermarket speakers (small hole in door for speaker and non-standard mounting points). For this vehicle, you need the brackets to prevent interference with the speaker terminals / magnet (reduce depth of speaker in door by the thickness of the adapter). For the back doors, I needed both these adapters and the ones supplied with the speaker to get the required clearance.

Pros: Mounting flexibility.

They were perfect for me

Written By Julio, Lynchburg, VA on Wednesday, December 04, 2013

I had no trouble replacing my stock speakers using the mounting brackets.

Pros: Perfect for my Infinity Reference

Cons: I had to drill one new hole in both doors; these brackets don't align perfectly with the holes made by the car manufacture. Not a biggie for me.

Metra 82-3412 speaker mounting brackets

Written By Randy M, Reno nv on Sunday, October 27, 2013

Crutchfield Customer Review (What's this?)

I thought they were cheesy didn't hold the speaker in place very well

Pros: Light

Cons: Did not do a good job of holding speaker in place

Metra 82-3412 Speaker Mounting Brackets

Written By Matt, arlington tx on Tuesday, October 15, 2013

I have a honda civic.2004 sedan and I used these brackets to hold in my 6.5 kenwoods and yes the hold them in and the screw in to the door fine but the problem I had was putting the door back together I had a big gap underneath my door, so I had to break off some of the brakets so their will be no gap and after I did that it wouldn't close all way theirs still a gap but not as big.

Pros: fits

Cons: door has a crack on it

Does the job.

Written By Richard, New York, NY on Monday, October 14, 2013

Crutchfield Customer Review (What's this?)

First: These brackets require you to put a little time and effort into your speaker installation since Honda gave us such awkward speaker openings from the factory. You do need to drill into your door. I installed these in my friends shop and was very happy I did. I ended up using the supplied hardware from my Polk Speakers as to mount the speakers. Then used nyloc nuts and bolts to mount the bracket to the door. Best option in my opinion. Please take your time orienting the speaker with the bracket!

Pros: Got my speakers in!

Cons: For most DIY'ers it may seem like a really huge hassle with these brackets. But not really any other option for Civics.

Metra 82-3412 Speaker Mounting Brackets

Written By Ed.O, Billerica, MA on Tuesday, August 06, 2013

Crutchfield Customer Review (What's this?)

Perfect fit.

Not the best but they fit.

Written By Redd88, Atlanta, Ga on Wednesday, July 03, 2013

Crutchfield Customer Review (What's this?)

Not a fan of the idea of having to drill new holes in my car for these brackets. Not to mention the screws to secure the speaker to the bracket requires spacers because otherwise the screws make it harder to mount the speakers in the door.

functional with mods

Written By SteveC, Billerica, MA on Tuesday, June 25, 2013

Crutchfield Customer Review (What's this?)

The brackets fit perfectly in the vehicle, however the speakers that these came with, MTX TN653 did not directly fit. The hole pattern in the speakers did not line up with the hole pattern on the brackets. I had to drill new holes. Also, the brackets should have been supplied with screws since the speaker supplied screws were too long. Overall minor issues, but still caused extra work.

Pros: Fit vehicle door perfectly

Cons: Had to modify for speakers

Not the easiest product to use

Written By KenR, Sacramento, CA on Wednesday, May 29, 2013

Crutchfield Customer Review (What's this?)

Mounting Speakers to adapter was not that bad, but mounting to door was difficult. Holes did not line up well, had to drill 2 hole for each bracket, had no groves to allow wires from speaker to connect to car wiring ( wiring was not inside door frame, but outside of plastic sheet of door).

Pros: Ok for price.

Cons: Instructions very vague, no wiring access from speaker.

Does not fit 2007 Honda Fit

Written By K., Raleigh, NC on Monday, May 27, 2013

Crutchfield Customer Review (What's this?)

While eventually we were able to use these brackets, it was only after we were forced to use a bandsaw to remove tabs along with some excess plastic in order to allow the door panel to fit back on. But the brackets as they were did not fit the car at all, they were simply too big. Something that should have take a short amount of time took much longer because we had everything set to go and then realized we couldn't get the door panel back on.

Pros: Eventually, you may get your speakers installed.

Cons: It won't be an easy process.

These did not fit 2003 Honda Civic

Written By Dar34, Lexington, SC on Thursday, May 16, 2013

Crutchfield Customer Review (What's this?)

I can't really complain about these, as they were free, but I had to drill mounting holes to get them to fit. They also caused the speakers to sit a bit too high.

Pros: Free, allowed speakers to be installed.

Great kit, but it needs some more screws!

Written By 2004 Honda Civic Hybrid, Lubbock, Texas on Tuesday, May 07, 2013

Crutchfield Customer Review (What's this?)

These fit the door well! My only issue is, since you aren't using the original speaker hardware and since you have to drill new mounting holes, it would be nice if this kit included some self-tapping screws for mounting to the door.

Pros: - Fits the door well - Speakers were easy to install in brackets

Cons: Does not include mounting hardware for the door

Stop complaining

Written By Dfdrummer1, Seattle, wa on Sunday, April 14, 2013

To anyone complaining about the included screws or not fitting the contours of their specific vehicle: the purpose if this product is to get speakers not made for your car to fit in your car and/or to add a spacer for vehicles where clearance is an issue. As a professional car audio installer I know that there is no such thing as a "perfect fit" when it comes to customizing anything car related. The purpose of a product like this is to allow the speaker to be mounted at all, whereas without it would not be possible. It is up to your own experience and creativity to make them work for your specific vehicle. If the hardware included doesn't work for you (which you shouldn't expect anyway), find hardware that does. Just realize that this product is not labeled "everything you need to install 6 1/5 inch pioneer component speakers into a 2001 Honda Pilot". This is a universal product. If you don't know what you are doing, don't blame the tools and products you are working with, blame your lack of experience.

Good brackets

Written By Badger G, Clovis, NM on Thursday, March 14, 2013

Crutchfield Customer Review (What's this?)

They work as described. Good quality as well.

Pros: Make those speakers fit!

Simpler to Install than it Seems

Written By ASacredCow, Madison, WI on Thursday, March 14, 2013

Crutchfield Customer Review (What's this?)

I used these to mount some Polk Audio db's in my 2002 Honda CR-V and was confused by the easy mount clips that came with the harnesses. In my case, turns out all you had to do was drill your own holes into the door and use the screws that were included. Once the confusion was set aside, it was a breeze to install. As long as you make sure everything is screwed together tightly, you'll run into no vibration problems (assuming you're not using these to install high-performance, competition-grade speakers) or speakers falling out in your door panel.

Pros: Includes everything you need but the speaker itself, doesn't rattle for standard aftermarket speakers

Cons: Installation instructions are a tad confusing

2005 Honda Civic

Written By Jay D, Olympia, WA on Friday, August 24, 2012

Crutchfield Customer Review (What's this?)

If your looking for Plug and Play - Good luck, it's just not out there... if you have some skills then these will work fine for you. I had to cut off the two longer tabs (which the instructions say to 'break off' any unused tabs), then I drilled holes in the door for the three smaller tabs, put some weatherstripping on the back for cushioning and attached them with screws... worked great!

Pros: Nice quality brackets for 5 1/4" speakers.

Cons: Certainly not plug and play like folks are looking for, but if you are creative you can make them work.

Great for Fiat 500 Front Door

Written By ralplpcr, Raleigh, NC on Monday, June 04, 2012

Crutchfield Customer Review (What's this?)

These were great in replacing the door speakers in my 2012 Fiat 500. The only thing I could have asked for different would have been some regular nuts instead of the speed nuts - - they just won't work with the existing hole on my car. You instead have to get behind the door liner and hold a nut to the back of the speaker while screwing them tight from the front. Once I did that, these provided a perfect fit to replace the factory speakers.

Pros: Perfect fit to replace factory mounting bracket

Cons: Speed nuts could not be used in my installation.

Useless!

Written By Jet, Oakland, CA on Sunday, April 29, 2012

Crutchfield Customer Review (What's this?)

These didn't fit into my Honda very snug and the screws that came with it were too short for a secure fit. I did the best I could.

Did not fit

Written By Marshall, San Francisco, CA on Sunday, April 29, 2012

Crutchfield Customer Review (What's this?)

Did not fit on the 2008 Honda Fit for which Crutchfield said they would work. Since they were thinner than the OEM brackets I had enough space to rotate and bend them to get them to finally work, but they are certainly not appropriate for this car and do not sit flush against the door. Frustrating experience...

Honda CRV challening but worked

Written By Whately, Chapel Hill, NC on Tuesday, March 13, 2012

Crutchfield Customer Review (What's this?)

These one-size-fits-all adapters made mounting challenging on my '04 Honda CRV. The instructions weren't that helpful. Eventually I hit upon the following solution: I removed all the tabs from the adapter, drilled four holes in the door, then used the screws that came with my new Kenwood speakers to mount the adapter (without the tabs, the screws that come with the adapter are useless). That's the only way the adapter will sit flush with the door surface. Then I could mount the speaker to the adapter, using some screws from the hardware store. Some make/model specific instructions would have made this a lot easier.

Pros: They work, and they came free with the speakers.

Cons: Challenging install, needed different screws, vague instructions.

poor fit

Written By marc g, Waterville, ME on Friday, February 10, 2012

Crutchfield Customer Review (What's this?)

This was shipped to fit a mini cooper. They simply do not fit, they fot the speakers but not the car.

Works fine...

Written By JARblue, Austin, TX on Wednesday, February 08, 2012

Crutchfield Customer Review (What's this?)

The mounting brackets worked fine, but were pretty make-shift. The contours of the metal around the speaker opening in my doors did not allow the bracket to sit flush at all. I used some special acoustical foamboard as a backing which was incredibly tedious to cut to fit snug against the various contours of the door panel (this is more Honda's fault and also mine for having OCD about the install quality). I had to drill new holes in the door to install the bracket, and the speaker then screwed directly in the plastic casing of the bracket.

The fact that this bracket is for multiple makes and models reminds me of those tee-shirts that are labeled one-size-fits-all but are just size XXXXL. Sure it fits... just not well.

Pros: Allows me to install 6.5" speakers in opening designed for much smaller speakers in my 2004 Honda Accord Coupe 6MT

Cons: Install is not as simple as a custom bracket would have been. I would have paid more for a better product, but I simply couldn't find one for my Honda. Also, I really would have liked to use the factory screw holes.

Wrong part

Written By Nissan Leaf, Seattle on Monday, January 23, 2012

Crutchfield Customer Review (What's this?)

Crutchfield said that these brackets would fit my Nissan Leaf, but that is only if you drill new holes in your car door. The holes just don't line up. Completely the wrong part.

Pros: did not use.

Cons: did not fit. did not use.

Didn't fit, didn't use

Written By Paul, Indiana on Wednesday, October 12, 2011

Crutchfield Customer Review (What's this?)

These came with my Boston Acoustics, but did not fit my Saab Viggen at all. I called Crutchfield tech support, and he was very friendly and tried to help, all he could offer was to send them back and try something else. We weren't sure what that would be, so I made the original brackets work . Just had to do some drilling through the plastic bracket and the door metal. Speakers sound good, I'm happy.

Speaker Adapters

Written By Billy, Turlock, Ca. on Tuesday, September 06, 2011

Crutchfield Customer Review (What's this?)

Adapters work, with some minor drilling to the metal on the doors and some moving and slding around for fit, but they help with window placement.

Does not fit Sony XSGTX1641

Written By Tony, Annapolis, MD on Sunday, June 12, 2011

Crutchfield Customer Review (What's this?)

Does not fit Sony XSGTX1641 speakers.

'05 Accord - weird factory door speakers

Written By Chris R, Cincinnati, OH on Monday, May 16, 2011

Crutchfield Customer Review (What's this?)

Honda has make their factory speakers custom with custom mounts. Their outer
speaker housing is plastic and it just snaps into the door sheet metal. This
bracket fits a generic template and new holes needed to be drilled. I wasn't sure
the door panel would fit until after mounting the speaker.
In the end it went fine, but drilling holes in the wifes car with the boss watching me
wasn't fun. I was afraid that I might need to sleep in the truck.

Metra 82-3412 Speaker Mounting Brackets

Written By Aaron, Eastern Washington on Tuesday, March 01, 2011

Crutchfield Customer Review (What's this?)

These brackets were used to install Pioneer 6.5 door speakers. The brackets did work
although it did require drilling to mount these in the metal of the door. I would say they
did the job. The job itself was not too hard. The hardest part was figuring out how to take
the door panels off.

Speaker Brackets

Written By Jon, Westminster, CA on Saturday, February 19, 2011

Crutchfield Customer Review (What's this?)

This is a universal adapter that will likely need to be modified to fit a
specific vehicle. If you're handy with some basic tools you should be able to
make it fit. I too was disappointed it was not a direct fit for my car, but
after a little work I did get a solid fit in the front doors of my 2005 Honda
Accord.

This bracket does NOT fit a 98 Corolla properly!

Written By J.S., Grand Rapids, MI on Tuesday, January 18, 2011

Crutchfield Customer Review (What's this?)

My 6.5 inch pioneer speakers took close to 2 hours to install in the front
doors, and most of that was modifying and improvising these speaker brackets to
mount properly on my 1998 Toyota Corolla. My brother helped me with the
installation, and we had to use at least four washers that were not supplied
with the bracket or speakers in order to mount the speakers in the doors. We
had to dig around and find our own washers first. Yes, we were able to do it,
but the unexpected problems with these brackets easily doubled the total
installation time. I imagine that this problem will apply to the 98-2000 Toyota
Corolla models. You won't realize the problem until you get the door panel off
and get well into the installation process, and suddenly you realize that there
is no way to secure this speaker bracket to the car door without washers. I
wish I had taken pictures to post but I didn't realize I would be writing a
review and I don't want to take off the door panel again.

Speaker Brackets for Saab 93

Written By JohnE, NY on Wednesday, November 10, 2010

Crutchfield Customer Review (What's this?)

Only two of the tabs lined up with the screw holes in the door. The third hole had to be
drilled - not an issue, but the instructions should suggest that some modification may
be required. Since the drilled hole did not have a lug for the threads, a screw with
washers and a nyloc nut was used.

Don't work for the application they were sent for

Written By Bill N, Tulsa, OK on Tuesday, August 24, 2010

Crutchfield Customer Review (What's this?)

These were shipped as part of an install package for a 2007 Honda Accord EX-L. The speakers used were the JL Audio TR600-CXi 6-1/2" in the front doors.

This adapter has no mounting points that are even close to lining up with the door shape on this car, and the adapter's thickness is about half of what it needs to be to allow the speaker to screw to the adapter and then sit inside the door properly. The basket of the speaker hits the hole in the door long before the outer flange of the speaker contacts the adapter.

Not a good fit

Written By Alan, Springfield, OH on Monday, June 14, 2010

Crutchfield Customer Review (What's this?)

These brackets are marginal at best for a Honda Accord. They did not line up well with the hole in the door for the speaker. If I was going to install door speaker again I would probably try to make my own brackets so the fit would be better.

Absolutely necessary to have

Written By Anonymous, Westminster, MD on Saturday, January 16, 2010

Crutchfield Customer Review (What's this?)

Installed 4-way pioneer speakers into very thin doors on a 2009 Subaru Legacy. These rings, when oriented in the correct way, only required having to drill 1 hole in the door. I just broke off the extra tabs that weren't needed (made it fit better in the Subaru). Very simple to get installed, and without them the speaker would NEVER have fit in there. Overall good speaker ring considering it is probably for like 100 different vehicles.

Some assembly required...

Written By Joe, Mustang, OK on Friday, December 18, 2009

Crutchfield Customer Review (What's this?)

At first it took awhile to figure out the best way to utilize this bracket with a 2009 Honda Ridgeline. I ended up needing additional hardware and I would also highly recommend the adhesive weather stripping foam available at the local hardware store to create a better fit. The foam fills the unique contours of the door frame and provides a tight seal.

DID NOT FIT

Written By Anonymous, Kansas City, MO on Monday, November 23, 2009

Crutchfield Customer Review (What's this?)

Rec'd these free with my order to replace the factory front speakers in my 2005 Subaru Outback. Needed to modify both brackets by drilling holes in the extra long tabs and then snipping off the extra material in order to get the door panels back on. This added an extra hour to my install in order to get everything right. I wasn't happy, but not dis-satisfied enough to send them back (since my car was already tore apart!)

2006 maxima

Written By Anonymous, Birmingham AL on Friday, October 02, 2009

Crutchfield Customer Review (What's this?)

These did not fit the factory holes in my car. Even with all the mounting
holes you can not turn it to fit correctly. I ended up being able to use 2 of
them and then having to use a screw to mount the the third hole. This was
disappointing, when I am told something fits I thought it means that it fits
not that it works.

Adapter Brackets for Honda Accord

Written By Tony, Long Island NY on Saturday, July 11, 2009

I used these adapter brackets to mount Polk DB521'S in the front doors of my '07 Accord. Just as the Mastersheet states, you have to drill holes (3) for each door to mount the adapter. I used self supplied half inch long self tapping screws to mount the Polk's speaker frame's four mounting ears to the bracket first, then I used three one inch long scews that come with the Polks to mount the bracket with the speakers attached to the doors. Relatively simple, just a bit (no pun intended) more work to drill out the holes. Then I used some touch up paint in to the holes to help prevent rust. Also as stated in the Mastersheet I removed the unecessary outer mounting ears on the bracket. One tip before drilling the new mounting holes around the speaker hole in the door panel, stuff a plastic bag in the cavity to catch the metal shavings that would fall in to the bottom door channel from drilling. When done drilling carefully pull the plastic bag out. Good product overall.

Metra 82-3412 Speaker Mounting Brackets

Written By Rob, Sacramento, CA on Sunday, March 22, 2009

Crutchfield Customer Review (What's this?)

Didn't fit a 08 Honda Fit. I did have to use the spacers but, had to drill holes in both the bracket and doors to make it work. Not a huge deal but, do not assume these are "plug and play."

GREAT help with the install

Written By James, West Tn on Tuesday, February 17, 2009

Crutchfield Customer Review (What's this?)

These help out a lot when installing new front door speakers in an 04 Honda Accord. The spacing that these give helps for getting the new speakers into the grill area in the door panel. Plus since they came with the speakers the price was real good, called FREE!!! A real value added for when mounting in new speakers.

Doesn't fit '03 Honda Civic as advertised.

Written By Roger, Walnut Creek, CA on Thursday, February 12, 2009

Crutchfield Customer Review (What's this?)

Don't even try to mount the speakers with these mounts, or the ones that come with Infinity 5022i speakers. They're too thick to fit under your Civic interior door panel.

Unecessary!

Written By fattymcboom, Irving, TX on Friday, November 14, 2008

Crutchfield Customer Review (What's this?)

The brackets that I need to install my Alpine SPS-17C2s were in the box with the speakers. I just threw these away.

Metra 82-3412 Speaker Mounting Brackets

Written By B-Spec, Nevada on Saturday, October 18, 2008

In order to use these with a Suzuki SX4 you have to re drill all the holes in the doors.. It is very easy to do and these adapters fit well and work great.. Makes the install very tight and has a great factory look..

Perfect for a 99' Corolla

Written By Brian, Springfield, OR on Monday, September 15, 2008

Crutchfield Customer Review (What's this?)

These adapters allow after market speakers to fit in the factory holes in the front doors of a 99' Corolla. Without these you would have to jimmy-rig your speakers up and hope they don't fall out when you hit a bump. My only complaint is that the nuts and mounting bolts that came with the adapter didn't fit the factory holes and I hade to use some rivets instead.

Made the install easy

Written By Anthony, Salt Lake City is the place for Snowboarding! on Thursday, September 11, 2008

Crutchfield Customer Review (What's this?)

These little ditty's did what they are designed to do. You don't need to be a professional fabricator to get them installed but you do want to be aware of your wire placement and speaker alignment in order to get the correct placement and maximum length out of your speaker wire adapters. I had to pull off one of the large tabs on each to fit it properly in my Toyota Corolla. Also if you need to drill new holes for them, be really careful not to overtighten the sheet metal screws. I learned the hard way and had to redrill one side after I stripped one of the holes

Questions & Answers Ask the community. Share your knowledge.

Searches related to the Metra 82-3412 Speaker Mounting Brackets Install 5-1/4" or 6-1/2" speakers in select vehicles