Universal Plastic Panel
12" x 12" waffle board panel
Item #: 1208900903
Your price: $11.99 Earn up to 12 Rewards points
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 1208900903
Your price: $11.99 Earn up to 12 Rewards points
If you're planning a custom installation, this panel will help you achieve the professional-quality look you want. This 12" x 12" ABS plastic panel is scored on the back, so whether you're creating a bracket for a speaker or filling in gaps around a receiver, you'll be able to create the opening you need. The front of the panel is smooth, so it will blend into your vehicle's interior.
You'll get one panel per package, so if you're installing a pair of speakers, be sure to order one panel per speaker. Warranty: 60 days.
After purchasing a receiver for my vehicle, I found the only face plate offered was to small for my dash opening. Called Crutchfield and after talking to them they guided me to this product for my problem. For the first time using the board it was fairly simple to figure out. Now my radio looks like it should.
Pros: Great product to solve fitment problem I had. Would definitely use it again.
Cons: The only problem and it was only a minor one, was figuring the best way to cut it for the best appearance.
The application (2004 Toyota Corolla) required an adapter to mount after market speakers in the rear deck. For molded plastic I found the price to be excessive. I was also disappointed to find out I needed two which would be the case for any rear deck application nd had only ordered one. My opinion if sold they should include two sheets for the price. I ended up manufacturing my own and threw the sheet of plastic in the trash.
Cons: Expensive and only enough material for 1 speaker
I'm sure this is a great product but I purchased as advised and did not need it
I had to fabricate a mount for my new speakers to go in to my '04 Corolla. These panels probably made it as easy as it could be. The pre-scored lines help as a cutting guide. I used a jig saw to cut the plastic.
Pros: Pre-scored lines. Easy to cut with a jig saw.
the person i spoke to on the phone advice me to get this template "you have to have this" for your 99 carrera coupe it's a perfect template for the new kicker CS44 speakers on the dashboard. it takes a long time to cut it and doesn't fit. waste of my money. i used the factory bracket that came with the old speakers instead.
Cons: waste of money. hard to cut and no instruction.
Could not use these in rear doors of my extended cab truck. They were recommended my Crutchfield but had no instructions regarding how to cut the plastic or mount it. They were pre scored but not with the speaker size I ordered (6.5"). They appeared to be made of durable plastic but after purchasing them, I have no use for them. I managed to modify the factory mount and used the mounts that came with the speakers. If I had not already opened the packages, I would be sending these back.
Pros: Durable plastic
Cons: Simple sheet of plastic. Hard to cut and trace pattern onto. No instructions or recommendations for use at all.
The jury is out on this product. The product worked out fine and filled the need perfectly. It is very easy to work with. One thing I noticed is that the material was a bit too soft (imho) and melted when drilled. The softness does make sure it doesn't 'snap' or break when drilled or being bolted in place. So as I said, I am torn whether the material is the correct hardness. I will definitely purchase more because of the ease with which it is to work with.
Pros: easy to work with. Flexible
Cons: Melts when drilling large holes and motorized sanding .
Pros: Its plastic
Cons: Its plastic?
The templates are helpful and ultimately the plastic makes a decent bracket. Cutting out the circles is more of a pain than I expected - just scoring with a carpet knife doesn't work for circles. No instructions included. I would prefer buying a bracket that has the hole for the speaker cut out and only adjust the size around it to fit it in my car...
Cons: hard/involved to cut out circles no instructions included
The speaker adapter plate will work for some of the speakers. I have a titan se crew cab . It would not work in my truck.
Pros: Last resort
Cons: Would not work.
Very stout and easy to work with! Will use again!
Great product, it allowed me to fit my new radio into an opening that was to big for the new radio,
Pros: Looks great and it allowed me to fit my new radio into an opening that was to big for the new radio
Cons: There should have been instructions on how to cut the panel. I used a jig saw with a fine tooth blade which caused the plastic to gum up. A course blade might have worked better.
They are made of pretty solid material and everything cuts out well, but the one thing they failed to mention when I was ordering these is that using them to install speakers that do not line up with the original holes would require you to drill new ones into steel frame of your car. I got around this issue by screwing the mount into the original holes, then using silicon to hold my speakers in place. Worked very well.
Pros: Strong material
Cons: Hard to cut Might require drilling new holes into the steel frame of the car
Not sure how you were supposed to cut this as there was no instructions, I used a jug saw that melted the plastic and you only had a 1 sec to separate the plastic before it fused back together
Pros: Ability to make custom mounts
I was a bit skeptical purchasing a piece of plastic, but it worked out great, the plastic has a grid on the back, all I had to do is score it with a utility knife, then bend and the piece I wanted broke of easily.
Pros: Easy to work with
i had trouble cutting it but it worked out ok
Pros: nice finish if it was visable
Cons: no instructions
The website says 5 x 8 speakers are standard for my car, but when I took out the old ones I knew the new ones were going to be way too small. Crutchfield sent me this for free to make up the difference. Very nice of them, but I wish now I would have ordered 6 x 9's instead.
This product worked out great, cut a larger hole than needed in the dashboard of my boat, This product made it look more of a professional install. Was great that had a larger sheet than needed, knowing that if I messed up I would still have more pieces to work with.
Pros: Was easy to work with and cut, had pre-scored lines to help with the measurements.
Worked great for front & rear speakers cut easy with jigsaw templates made it very easy to cut holes
Pros: Worked great for front & rear speakers cut easy with jigsaw templates made it very easy to cut holes
Kind of a shame I had to call back the original sales person said it was a factory fit. Not even close! Howeverr the panel kit did it's job.
When it turned out that my radio was not as good a fit as Crutchfield indicated
it would be, I called technical support for help. They sent me this Universal
Panel kit at no cost (nice). Before I received it, I was concerned about my
ability to make accurate cuts in a piece of hard plastic so that it would fit
around the radio with no cracks.
When I received the piece, I was delighted to see that the back of the panel was
deeply engraved with a series of closely spaced lines, making it much easier to
ensure that my cuts were straight and parallel. The plastic was still very
tough, and it took several passes with a utility knife to score it deeply enough
to "snap off" the excess for the outside cuts. The inside cuts were even more
difficult. I finally used a razor saw to do the interior cuts.
The piece was big enough that with careful measuring, I could have made two face
plates for my double-DIN radio. This made me a little more confident in my
cutting, knowing that I had a second chance if I messed up the first time.
All in all, it's a very nice product if you need it. Just take your time and
This is a good peice to fill in some space. It has templates in it for different size speaker,
if that's what you need it for. The frontside of it is like a crinkle finish so you don't see the
templates from the front. The rear is set up so it can be easily and evenly scored and
snapped apart to fit. The only problem I see is down the middle of it is a dark colored
discoloration that is not extreme but noticable, I only have to use half of it so I can keep
that part out.
ABS Plastic Sheet: The plastic is scored on one side for easier customization. The scoring lines include horizontal and vertical straight lines, four sets of three concentric circles (approximately 4.9", 4.0", and 3.1"), and an 8.5" x 5.75" oval, containing 5" and 2.9" circles.
Note: Only one ABS plastic sheet is included.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Holes in doors too big [ Fred Feb 06, 2016 ]
It was recommended due to a special size speaker requirement for my automobile. [ FRANK Dec 30, 2015 ]
Tech Advisor stated I was going to need it for the modified installation into my Toyota Sequoia. [ David Dec 07, 2015 ]
I need to enclose the area behind the center console of an antique car. This looks like an ideal material. The dimensional size is also nearly perfect for my needs without much waste. [ Michael Dec 07, 2015 ]
I didn't end up using mine. [ VICTOR M Oct 22, 2014 ]
You need to cut out a piece that will fit around your speaker hole then trim a hole to mount speaker (will look like a donut) only issue is this material is pretty stiff and difficult to cut unless you some kind of power tool to trim Would be fairly difficult with heavy duty snips I ended up not using and just got other precut trim rings [ WENDELL Oct 22, 2014 ]
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Krissy Oct 24, 2014 ] Staff