Skip Navigation

T-Spec 8RAK Installation Kit

8-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire

3 Reviews

Item #: 1208RAK

This item is no longer available.

Original Price: $69.99

Shop all Single-amp Wiring Kits

Add to Cart

T-Spec 8RAK Installation Kit

Overview

Our take on the T-Spec 8RAK Installation Kit

Power up to specification

This 8RAK amplifier wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 8-gauge power and ground wires, an 18-gauge turn-on lead, 12-gauge speaker wire, a 17-foot stereo patch cable, a fuse holder, and an assortment of hardware useful for your installation. T-Spec Competition Rated Car Audio makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.

Oxygen-free virgin copper

Recycled copper often contains impurities that can impair conductivity, so T-Spec uses only oxygen-free non-recycled virgin copper in all their wire to maximize signal and power flow. The high strand count and special PVC blended jacket give T-Spec wire an extraordinary flexibility, making installation easier. The power and ground wires in this kit each come with a sturdy ring terminal machine-crimped to one end, ensuring a secure contact with your car's battery and chassis ground. T-Spec even pre-installed the fuse holder (with a 60-amp fuse included) inline on the power wire, for your safety and peace of mind.

All you will have to do is strip plug and play. No putting on all your own stuff.

Stephen b, Coaling al

What's in the Box:

  • 17' v10 8 AWG OFC multi-strand power wire in a matte pearl white PVC blended jacket
  • In-line v12 compact brass MANL (Mini ANL) fuse holder with a 60A MANL fuse (installed)
  • 3' v10 8 AWG OFC multi-strand ground wire in a matte gray PVC blended jacket
  • 17' 18 AWG OFC remote turn-on wire in a blue jacket
  • 17' v10 RCA cable in matte pearl white PVC blended jacket
  • 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket
  • Two 8 AWG crimp-on spade terminals with white (power) and silver (ground) boots
  • Four 12 AWG crimp-on spade speaker wire terminals (amplifier side)
  • Four 12 AWG crimp-on quick-slide terminals (female)
  • Red 18 AWG crimp-on spade terminal
  • Red 18 AWG butt connector
  • Firewall bushing for 8 AWG wire
  • 8 Wire ties (3.5" length)

Product Highlights:

  • amplifier wiring kit
  • all wires made of oxygen-free non-recycled copper
  • wires meet all ANSI and CEA standards
  • 17 feet of 8-gauge matte pearl power cable with ring terminal
  • 3 feet of 8-gauge matte gray ground wire with ring terminal
  • 17-foot 2-channel RCA patch cable (double twisted pair for superior noise reduction)
  • 12 feet of 12-gauge black and white speaker wire
  • 17 feet of 18-gauge blue turn-on lead wire
  • brass mini-ANL fuse holder with 60-amp fuse installed on power wire
  • comes with an assortment of hardware including wire ties, a firewall bushing, and various crimp-on wire terminals
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

T-Spec 8RAK Installation Kit Reviews

Average Customer Review:

3 Reviews

Great kit

Written by: Stephen b from Coaling al on August 26, 2014

Crutchfield Customer Review (What's this?)

All you will have to do is strip plug and play. No putting on all your own stuff.

Pros:

Cons:

T-Spec 8RAK Installation Kit

Written by: cookin_with_luke@yahoo.com from Black Hills, SD on March 21, 2014

Crutchfield Customer Review (What's this?)

Great speakers! Purchased on sale with pioneer deck for replacement in friends Camry. Super easy install with Crutchfield brackets.

Pros:

Cons:

Quality Install Kit

Written by: B from South Florida on August 31, 2013

Crutchfield Customer Review (What's this?)

Quality install kit. Comes with everything you need to run a single amp. I used it on a 500-600w system and you can tell the wiring is made well. The cord lengths were appropriate and I like the fact it's marine grade just incase, as I drive a truck in wet areas at times.

Pros: Good Quality Fair price Marine Grade Comes with a variety of connectors Fuse is pre-wired.

Cons:

Details

Hands-on research

What's in the box?

  • 17' v10 8 AWG OFC multi-strand power wire in a matte pearl white PVC blended jacket
  • In-line v12 compact brass MANL (Mini ANL) fuse holder with a 60A MANL fuse (installed)
  • 3' v10 8 AWG OFC multi-strand ground wire in a matte gray PVC blended jacket
  • 17' 18 AWG OFC remote turn-on wire in a blue jacket
  • 17' v10 RCA cable in matte pearl white PVC blended jacket
  • 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket
  • Two 8 AWG crimp-on spade terminals with white (power) and silver (ground) boots
  • Four 12 AWG crimp-on spade speaker wire terminals (amplifier side)
  • Four 12 AWG crimp-on quick-slide terminals (female)
  • Red 18 AWG crimp-on spade terminal
  • Red 18 AWG butt connector
  • Firewall bushing for 8 AWG wire
  • 8 Wire ties (3.5" length)

Product Research

Features

Overview: This T-Spec v10-series amplifier wiring kit contains enough power and ground wire, RCA cable, speaker wire, turn-on wire, and connection accessories to install a single amplifier in most vehicles. The OFC (oxygen-free copper) wire included in this kit meets CEA-2015 and ANSI specification for wire gauge, and is BC-5W2 marine compliant. The high strand count gives you maximum flexibility and maximum conductivity to give your components the greatest current capability.

Contents: This v10-series amplifier kit contains the following:

  • Power Wire: 17' v10 8 AWG OFC multi-strand wire in a matte pearl white PVC blended jacket. The wire has an in-line v12 compact brass MANL (Mini ANL) fuse holder with a 60A MANL fuse. The battery end of the wire is terminated with a nickel-plated crimp-on ring terminal with a white boot and an 8.5mm hole.
  • Ground Wire: 3' v10 8 AWG OFC multi-strand wire in a matte gray PVC blended jacket. One end is terminated with a nickel-plated crimp-on ring terminal with a silver boot and an 8.5mm hole.
  • Turn-On Wire: 17' 18 AWG OFC remote turn-on wire in a blue jacket. Both ends are un-terminated.
  • RCA Cable: 17' v10 noise-rejecting, braided 3-conductor RCA cable with precision machined ends and quad-split tip.
  • Speaker Wire: 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket. The white jacketed conductor is square in shape, and is marked for positive (+) connection. The gray jacketed conductor is round in shape, and is unmarked.
  • Installation Accessories:
    • Two 8 AWG crimp-on spade terminals with white (power) and silver (ground) boots for amplifier connection
    • Four 12 AWG crimp-on spade terminals for speaker wire connection (amplifier side)
    • Four 12 AWG crimp-on quick-slide terminals (female) for speaker wire connection (speaker side)
    • Red 18 AWG crimp-on spade terminals and red butt connector for remote turn-on wire connection
    • Firewall bushing for 8 AWG wire
    • 8 Wire ties (3.5" length)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library