About the T-Spec 8RAK Installation Kit
Power up to specification
This 8RAK amplifier wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 8-gauge power and ground wires, an 18-gauge turn-on lead, 12-gauge speaker wire, a 17-foot stereo patch cable, a fuse holder, and an assortment of hardware useful for your installation. T-Spec Competition Rated Car Audio makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.
Oxygen-free virgin copper
Recycled copper often contains impurities that can impair conductivity, so T-Spec uses only oxygen-free non-recycled virgin copper in all their wire to maximize signal and power flow. The high strand count and special PVC blended jacket give T-Spec wire an extraordinary flexibility, making installation easier. The power and ground wires in this kit each come with a sturdy ring terminal machine-crimped to one end, ensuring a secure contact with your car's battery and chassis ground. T-Spec even pre-installed the fuse holder (with a 60-amp fuse included) inline on the power wire, for your safety and peace of mind.
Product highlights:
- amplifier wiring kit
- all wires made of oxygen-free non-recycled copper
- wires meet all ANSI and CEA standards
- 17 feet of 8-gauge matte pearl power cable with ring terminal
- 3 feet of 8-gauge matte gray ground wire with ring terminal
- 17-foot 2-channel RCA patch cable (double twisted pair for superior noise reduction)
- 12 feet of 12-gauge black and white speaker wire
- 17 feet of 18-gauge blue turn-on lead wire
- brass mini-ANL fuse holder with 60-amp fuse installed on power wire
- comes with an assortment of hardware including wire ties, a firewall bushing, and various crimp-on wire terminals
- warranty: 1 year
- MFR # V10-8RAK
What's in the box:
- 17' v10 8 AWG OFC multi-strand power wire in a matte pearl white PVC blended jacket
- In-line v12 compact brass MANL (Mini ANL) fuse holder with a 60A MANL fuse (installed)
- 3' v10 8 AWG OFC multi-strand ground wire in a matte gray PVC blended jacket
- 17' 18 AWG OFC remote turn-on wire in a blue jacket
- 17' v10 RCA cable in matte pearl white PVC blended jacket
- 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket
- Two 8 AWG crimp-on spade terminals with white (power) and silver (ground) boots
- Four 12 AWG crimp-on spade speaker wire terminals (amplifier side)
- Four 12 AWG crimp-on quick-slide terminals (female)
- Red 18 AWG crimp-on spade terminal
- Red 18 AWG butt connector
- Firewall bushing for 8 AWG wire
- 8 Wire ties (3.5" length)
Customer reviews for T-Spec 8RAK Installation Kit
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the T-Spec 8RAK Installation Kit
Product Research
Features
Overview: This T-Spec v10-series amplifier wiring kit contains enough power and ground wire, RCA cable, speaker wire, turn-on wire, and connection accessories to install a single amplifier in most vehicles. The OFC (oxygen-free copper) wire included in this kit meets CEA-2015 and ANSI specification for wire gauge, and is BC-5W2 marine compliant. The high strand count gives you maximum flexibility and maximum conductivity to give your components the greatest current capability.
Contents: This v10-series amplifier kit contains the following:
- Power Wire: 17' v10 8 AWG OFC multi-strand wire in a matte pearl white PVC blended jacket. The wire has an in-line v12 compact brass MANL (Mini ANL) fuse holder with a 60A MANL fuse. The battery end of the wire is terminated with a nickel-plated crimp-on ring terminal with a white boot and an 8.5mm hole.
- Ground Wire: 3' v10 8 AWG OFC multi-strand wire in a matte gray PVC blended jacket. One end is terminated with a nickel-plated crimp-on ring terminal with a silver boot and an 8.5mm hole.
- Turn-On Wire: 17' 18 AWG OFC remote turn-on wire in a blue jacket. Both ends are un-terminated.
- RCA Cable: 17' v10 noise-rejecting, braided 3-conductor RCA cable with precision machined ends and quad-split tip.
- Speaker Wire: 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket. The white jacketed conductor is square in shape, and is marked for positive (+) connection. The gray jacketed conductor is round in shape, and is unmarked.
- Installation Accessories:
- Two 8 AWG crimp-on spade terminals with white (power) and silver (ground) boots for amplifier connection
- Four 12 AWG crimp-on spade terminals for speaker wire connection (amplifier side)
- Four 12 AWG crimp-on quick-slide terminals (female) for speaker wire connection (speaker side)
- Red 18 AWG crimp-on spade terminals and red butt connector for remote turn-on wire connection
- Firewall bushing for 8 AWG wire
- 8 Wire ties (3.5" length)
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Quality install kit. Comes with everything you need to run a single amp. I used it on a 500-600w system and you can tell the wiring is made well. The cord lengths were appropriate and I like the fact it's marine grade just incase, as I drive a truck in wet areas at times.
B from South Florida