Features

Vehicle Compatibility: The Axxess Integrate XSVI-9005-NAV radio replacement interface module allows you to replace the factory radio in select 2005-up Mercedes vehicles (non-amplified factory system or when replacing amplified system) with an aftermarket head unit. Please consult the Crutchfield Car Selector to see if your vehicle and aftermarket head unit is compatible.

+12V Accessory Output: There is no 12-volt accessory wire in the factory harness, which requires the installer to run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. The XSVI-9005-NAV is designed to provide a 12-volt, 10-amp switched accessory output (red wire).

Navigation Outputs: The XSVI-9005-NAV provides essential wires required for aftermarket radios that have navigation. VSS (Vehicle Speed Sense), Reverse, and Parking Brake wires are provided. This helps to cut down the installation time, since the installer does not have to look for these wires in the vehicle.

Retained Accessory Power (R.A.P.): The Retained Accessory Power (R.A.P.) function supplies power to the radio after the ignition is shut off until one of the front doors are opened. This function is retained by the XSVI-9005-NAV interface.

OEM Steering Wheel Control Compatible (optional): The XSVI-9005-NAV interface features a right-angle 3.5mm connector that lets you keep your vehicle's OEM steering wheel controls via the optional Axxess Steering Wheel Control Interface (120ASWC1, sold separately).

Color Codes: Wiring up the XSVI-9005-NAV is like wiring up any other wire harness that would attach to an aftermarket radio's harness. The Metra/EIA wire code can be found on the back of the interface's package that will aid you in the wiring of your aftermarket radio The XSVI-9005-NAV interface contains the following wire leads.