About the Axxess ASWC-TOY-LEX Steering Wheel Control Adapter
Keep your steering wheel audio controls
Keep your steering wheel audio controls
The ASWC-TOY-LEX adapter from Axxess allows you to connect your vehicle's steering wheel controls to car stereos from Alpine, Clarion, Dual, Eclipse, Jensen, JVC, Kenwood, Parrot (with adapter), Pioneer, Sony, Visteon, or Valor. (Note: your new stereo must have a 3.5mm steering wheel control or wired remote control input.)
Installation is a straightforward process. You usually have to connect a couple of wires to the Crutchfield-supplied harness, then plug a connector on this adapter into a Toyota plug, and the adapter will automatically recognize your Toyota or Lexus. Once connected, the adapter's memory retains its programming even if battery power is interrupted. A USB slot allows you to keep the ASWC-TOY-LEX current when updates become available. Warranty: 1 year.
Wiring Advisory: You won't have to splice wires on your vehicle, as this interface plugs right into your car. You will have to connect switched power (12-volt ACC) and ground to the harness/interface you're using to connect your new car stereo. Axxess does provide custom wiring instructions for all confirmed compatible vehicles on their website.
What's in the box:
Axxess ASWC-TOY-LEX Steering Wheel Control Adapter owner's manual
- Steering wheel control interface module
- 12-pin harness (with molex connectors / bare wires / male 3.5mm connector)
- Female 3.5mm connector (with attached 9" brown and brown/white wires)
- Installation Instructions
Customer reviews for Axxess ASWC-TOY-LEX Steering Wheel Control Adapter
Loading...
Loading reviews...
Average review:
3.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Axxess ASWC-TOY-LEX Steering Wheel Control Adapter
Product Research
Features
Steering Wheel Control Interface (for Toyota & Lexus): The Axxess ASWC-TOY-LEX steering wheel control interface lets you retain your factory steering wheel controls in select Toyota & Lexus vehicle's when replacing the factory radio with an aftermarket head unit that features a steering wheel control input.
Vehicle Compatibility: The Axxess ASWC-TOY-LEX steering wheel control interface is compatible with the following 1999-2009 Toyota & Lexus vehicles.
Make | Model | Year |
---|---|---|
Toyota | Avalon | 2003-2004 |
Prius | 2001-2003 | |
Sienna | 1999-2003 | |
Lexus | GS300 | 1998-2005 |
GS430 | 2001-2005 | |
LX470 | 2001-2002 | |
SC430 | 2002-2009 |
Head Unit Compatibility: The Axxess ASWC-TOY-LEX steering wheel control interface supports popular brands of aftermarket head units including Alpine, Boss, Clarion, Dual, Jensen, JVC, Kenwood, Pioneer, Sony and others. The aftermarket head unit must have a SWC (Steering Wheel Control) 3.5mm input or steering wheel remote control input wire (blue/yellow).
Auto Detection: The Axxess steering wheel control interface has the ability to auto-detect your Toyota or Lexus vehicle and aftermarket radio. It will preset the steering wheel controls to the aftermarket radio automatically, so no programming is required.
LED Feedback: The steering wheel control interface features an integrated LED to indicate programming status.
Non-Volatile Memory: The Axxess ASWC-TOY-LEX has a non-volatile memory, which means the steering wheel control interface will remember the programming even if the device is disconnected from your vehicle.
Wiring: In addition to the two molex connectors which will plug into your vehicle's factory wiring, you will need to hardwire three wires of the ASWC-TOY-LEX to your vehicle. Connect the black wire to ground and the two red wires to accessory power.
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...