About the Metra ethereal CS-1X2HDMSPL2 HDMI Splitter 2.0
Double your viewing pleasure
Thinking about setting up a second screen over the bar in your man cave? Use this compact splitter to take your incoming HDMI signal and send it to two TVs or HD monitors. It supports 1080p and 4K resolutions (4K up to 30 frames/sec.) and is HDCP 2.2 compliant, so it will handle all the HD content you throw at it. It's perfect for the TV in the kitchen or any other place you want a second viewing area.Product highlights:
- share an HDMI source between two TVs or HD monitors
- supports resolutions up to 4K/30fps (10.2Gbps maximum bandwidth)
- supports HDMI 2.0 and HDCP 2.2
- includes AC power adapter
- warranty: 1 year
- MFR # CS-1X2HDMSPL2
What's in the box:
Metra ethereal CS-1X2HDMSPL2 HDMI Splitter 2.0 owner's manual
- HDMI splitter (1 input/2 output)
- AC power adapter (attached 5' DC cord)
- User Manual
Customer reviews for Metra ethereal CS-1X2HDMSPL2 HDMI Splitter 2.0
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Metra ethereal CS-1X2HDMSPL2 HDMI Splitter 2.0
Product Research
Features
1x2 HDMI Splitter: Metra's CS-1X2HDMSPL2 HDMI splitter incorporates a single HDMI 2.0 input with two HDMI 2.0 outputs allowing you to share a single standard definition, high definition, or ultra high definition source device (like a Blu-ray player, Game Console or Satellite/Cable receiver) with two displays (like your flat-panel TV or front projector).
HDMI 2.0 w/ 4K Support: Metra's 1x2 HDMI 2.0 splitter is compatible with ultra-HD video resolutions up to 4k @ 60Hz with support of 12-bit YCBR 4:2:0 color subsampling. It is also compatible with high definition video up to 1080p @ 60Hz; even 3D video. In addition it supports 480i standard definition video. The splitter is capable of receiving and transmitting video bandwidths up to 300Mhz/10.2Gbps.
Up to 7.1ch Audio: The 1x2 HDMI 2.0 splitter supports up to LPCM 7.1ch, Dolby TrueHD, and DTS-HD Master Audio.
HDCP 2.2 Compliant: HDCP 2.2 is supported by all of the HDMI splitter's inputs & outputs; HDCP is short for "High bandwidth Digital Content Protection" and is used for 4K video copyright protection for compatibility with 4K Blu-ray players and 4K Satellite/Cable providers.
EDID Control: Metra's CS-1X2HDMSPL2 HDMI splitter can be setup to use its own EDID settings or read the EDID settings of your display device. EDID stands for Extended Display Identification Data.
- EDID STD Mode: In this mode, the splitter will use its own built-in EDID settings. The splitter's video output will be set to 1080p @ 60Hz and the audio output at LPCM 2ch stereo. You should use this mode if there are display problems in EDID TV mode.
- EDID TV Mode: In this mode, the splitter will read the EDID settings of your display device connected to the splitter's HDMI Out 1. If it detects a 4K/2K capable EDID setting, it will transmit the signal in that format to all outputs. If no 4K/2K capable EDID is detected, then the unit will output the best resolution that all displays can support.
LED Indicators: The 1x2 HDMI 2.0 splitter features four LEDs to indicate Power, Input, and Output 1/2 status. These LEDs will illuminate Blue when the device is connected to power, a source, and up to two displays.
Power Requirements: Metra's CS-1X2HDMSPL2 HDMI splitter operates off of standard household current using the supplied AC power adapter (Input: 100-240V ~ 50/60Hz, 0.15A; Output: 5.0V/1A).
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
The splitter works perfect. Hooked up two tv's
Joel from Gonzales, LA