About the Spyclops 18-way 20-amp Power Distribution Box
This power box allows you to easily manage central power distribution to multiple cameras. This allows for a cleaner camera installation. All of your camera power wires can run to the power supply box, for a neat and efficient install. Each camera's power cable screws into the power supply box, and the box plugs into a 20-amp circuit, making it easy enough for a DIY installation.
Product highlights:
- junction box allows you to easily manage power distribution to multiple cameras for a neat, clean install
- requires connection to 20-amp electrical service
- easy DIY install, no electrician required
- 110 Volt to 12 Volt power supply
- lockable cabinet with two keys
- status LED indicates when 12 volt power supply is on
- 1-amp PTC fuses protect connected cameras
- removable power connections make camera wiring easier
- rubber grommets for safe and organized cable management
- knockouts on top and side of distribution box
- warranty: 3 year limited
- MFR # SPY-DB18W20A
What's in the box:
- 18-way Power Distribution box with attached 5' AC power cord (3-prong plug)
- 5 Small rubber grommets
- 1 Large rubber grommet
- 2 Keys
- Two spare 20A AGC fuses
Customer reviews for Spyclops 18-way 20-amp Power Distribution Box
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Spyclops 18-way 20-amp Power Distribution Box
Product Research
Features
Overview: The Spyclops SPY-DB18W20A is a 18-way 20-Amp Power Distribution Box for multi-camera CCTV surveillance systems. You can power up to 18 surveillance cameras from a central location. The DB18W20A has an input of 110 Volts AC and 18 outputs of 12 Volts DC each.
Connections: The DB18W20A has a 5' power cord with a 3-pronged plug. The 18 DC outputs each have a removable 2-pin connector. A small slotted screwdriver is needed to connect the camera power wires to the connector. Once the wires are connected, the 2-pin terminal simply plugs into the receptacle.
Fuses: The box is protected by a 250V/20A fuse. Two spare fuses are included. Each camera connection is protected by a resettable 1A PTC fuse.
Status LED: The distribution box has a red LED on the door to indicate when power is present.
Wall Mountable: The DB18W20A has four keyhole slots on the back panel that enable you to secure the box on a wall. Mounting hardware is not included.
Wire Management: There are five 3/4" diameter knockouts on the top and one 1" knockout on the right side for routing wires externally. Rubber grommets are included to protect the wires. A large opening is provided on the back panel for routing the wires through the walls.
Security: The Power Distribution Box has a lockable door, making it difficult to tamper with. The box comes with two keys.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...