Skip Navigation

T-SPEC V6-MANL Fuse Holder

4- to 8-gauge mini-ANL fuse holder

8 Reviews

Add to Cart

T-SPEC V6-MANL Fuse Holder

Overview

Our take on the T-SPEC V6-MANL Fuse Holder

T-SPEC's V6-MANL fuse holder provides a well-built housing for the mini-ANL fuses that protect your vehicle's electrical system. This water-resistant T-SPEC fuse holder offers solid brass construction to keep a strong current flow between the battery and your amp.

Protect your system and your vehicle

T-SPEC's V6-MANL fuse holder provides a well-built housing for the mini-ANL fuses that protect your vehicle's electrical system. This water-resistant T-SPEC fuse holder offers solid brass construction to keep a strong current flow between the battery and your amp.

The V6-MANL fuse holder accepts 4- to 8-gauge power wire and T-SPEC mini-ANL fuses. Warranty: 1 year.

What's in the Box:

  • v6-series MANL fuse holder base
  • 2 End caps
  • 2 Brass wire/fuse terminals
  • 8 AWG inserts
Reviews

T-SPEC V6-MANL Fuse Holder Reviews

Average Customer Review:

8 Reviews

Fuse holder

Written by: Ed R from Yonkers, NY on April 5, 2016

Crutchfield Customer Review (What's this?)

Solid connection , water tight as well, easy to install. The fuse is held by two screws, one on each end of it, you need to strip your power wire 5/16" for a perfect fit inside the connector . Not a cheap looking product. Highly recommended.

Pros: Safe, easy to install.

Cons: None

Worst Fuse Holder I've Purchased

Written by: RonB from orange park, FL on February 6, 2016

Crutchfield Customer Review (What's this?)

Poorly designed product. You cannot simply install or remove the fuse. When installing the mini ANL it is easy to bend or break the thin wire. It require more work to install a fuse than I care to explain. I've used many others priced the same which were much, much better.

Pros: In the end, it works.

Cons: Poor design. Difficult to install fuses.

great quality fuse holder

Written by: fatkid71 from Texas on August 14, 2015

I have probably used at least 75-80 of these in various installs from auto to marine, even a few other odd 12 volt applications. A great mid-level fuse holder that works extremely well. Not one failure yet. Just a side note to the poor ratings on this product. If you can not figure out how to assemble this simple fuse holder you are in over your head, go to a professional to have your amps installed. You simply roll back one of the o-rings to let the entire assembly slide through the housing , fasten the fuse, replace the o-ring, replace the end cap. No product deserves a bad rating due to user ignorance.

Pros: great price , good quality

Cons: may not fit in tight , cramped areas. This is pretty rare, though

T-SPEC V6-MANL Fuse Holder

Written by: kert from California on April 20, 2015

Crutchfield Customer Review (What's this?)

Very good construction and quality

Pros: Great price

Cons: didn't like the way the fuse had to be installed made installation a little tricky.

T-SPEC V6-MANL Fuse Holder

Written by: Anonymous from Jonesborough. TN on December 11, 2014

Crutchfield Customer Review (What's this?)

Easy to install

Pros:

Cons:

Fuse holder

Written by: Loudnproud from Grand junction, Colorado on December 11, 2014

Crutchfield Customer Review (What's this?)

Product looks good and is simple to figure out.

Pros: Both look good mounted next to my new amps.

Cons: Grommets supplied will work best for 8 gauge power wire. Not the 4 typically recommended.

Really?

Written by: Jones from Chicago, IL on October 22, 2014

Crutchfield Customer Review (What's this?)

It's not possible to fasten both screws that hold the fuse in place. The housing is one solid piece and does not allow access to the screws that tighten the hold on the fuse. This thing is a colossal pile of junk.

Pros: Looks nice.

Cons: - No instructions - It's not possible to secure the fuse between both connections. One connection can not be tightened down due to the fact that the housing is one solid piece. - Rubber seals on either end of the removable housing caps fall out of place constantly.

Crutchfield response on October 27, 2014 We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.

T-spec fuse holder mystery

Written by: mmcgrath from Marietta, GA on June 27, 2014

Crutchfield Customer Review (What's this?)

Solidly built, good price but no instructions on how to install a fuse. Unable to tighten one side after tightening and installing the other

Pros: Solidly built good price

Cons: No instructions on how to install fuse

Details

Hands-on research

What's in the box?

  • v6-series MANL fuse holder base
  • 2 End caps
  • 2 Brass wire/fuse terminals
  • 8 AWG inserts

Product Research

Features

Overview: This package includes a T-Spec v6-series MANL (mini ANL) fuse holder. This waterproof fuse holder features a translucent, impact-resistant polycarbonate cover. The connections for the power wires and fuse are made of solid brass with a flat-black finish. No fuses are included with the fuse holder. The fuse holder base has two holes to let you mount it with screws or wire ties.

Wire Gauge: The v6-MANL fuse holder can accommodate 4 AWG, and includes an insert for 8 AWG power wire.

Connections: The power wire is secured to the fuse holder with set screws. In addition, the fuse is attached with an Allen-head screw. A 3mm Allen wrench is required to tighten or loosen both the wire and fuse connections.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

I selected this fuse holder for it's compact size and water resistance. It will be in the engine bay, near the battery on my Jeep, which isn't exactly water tight. [ Danen  Jan 01, 2016 ]
Safe fusing for aftermarket amplifier. [ Donald  Dec 23, 2015 ]
Library

Searches related to the T-SPEC V6-MANL Fuse Holder 4- to 8-gauge mini-ANL fuse holder