Skip Navigation

T-Spec Set Screw Ring Terminals

2-pack with 1 red and 1 black terminal (4-ga. 3/8" hole)

22 Reviews | 2 questions - 15 answers

Item #: 120RT804P

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the T-Spec Set Screw Ring Terminals

Make your connections tight

You'll get tight and secure connections for your amplifier's power and ground cables with a set of T-Spec's set screw ring terminals. You just insert the wire's stripped end and tighten the Allen head set screw for a long-lasting and worry-free electrical connection. This package includes two heavy-duty nickel-plated ring terminals; one marked black, the other red. Warranty: 1 year.

Bought these for my 2nd battery hookup in the trunk these are nice it beats crimp terminals and awesome quality heavy duty terminals

william, Mansfield, OH

What's in the Box:

  • Two flat-black set-screw ring terminals for 4 AWG wire
  • 2 Rubber insulators
Reviews

T-Spec Set Screw Ring Terminals Reviews

Average Customer Review:

22 Reviews

Good terminals

Written by: william from Mansfield, OH on April 17, 2016

2015 Kia Optima
Crutchfield Customer Review (What's this?)

Bought these for my 2nd battery hookup in the trunk these are nice it beats crimp terminals and awesome quality heavy duty terminals

Pros: Well.built terminal

Cons: Lil pricey

Good product

Written by: Rich from Wexford, PA on April 10, 2016

2007 Chevrolet Cobalt
Crutchfield Customer Review (What's this?)

Nice and easy

Pros:

Cons:

Great quality !

Written by: George from canton, OH on March 6, 2016

Crutchfield Customer Review (What's this?)

I bought these terminals to connect 0 AWG wires to a power inverter in my work van. Previously I had crimp terminals , but , since I am very particular about the appearance of my van and tools in general, I decided to replace them with these set screw terminals. The 0 AWG wires fit perfectly and the set screws locked really tight. So the finish product is a combination of high efficiency and beautiful aesthetics ! :) Last but not least , dealing with Crutchfield is experiencing a true professional service in all aspects, during and after the sale. And great price too !!!

Pros: Great quality

Cons: None

Fast!

Written by: Mike from New jersey on December 30, 2015

Crutchfield Customer Review (What's this?)

Very fast shipping , terminals look awesome

Pros:

Cons:

Sturdy Construction

Written by: Ray from New York on November 21, 2015

Crutchfield Customer Review (What's this?)

Sturdy construction and connection is easy.

Pros: Sturdy construction and the installation is foolproof, its an excellent value for the price and provided an excellent connection with a little sanding for optimal contact.

Cons: The positive terminal needs a little more red to be more visible,for pros its not an issue.

good price

Written by: britt s from Virginia on August 9, 2015

really good made well and good price. and zero gauge hard too find this big a terminal for this price. got 4 packs too do all my hook ups from battery too cap too grounds all covered.

Pros: zero gauge

Cons: none that i can think of

Well made

Written by: SJH from Wisconsin on July 24, 2015

Crutchfield Customer Review (What's this?)

Well made and easy to use but I will they would sit flush

Pros: Well made and secure connection

Cons: I wish they would sit flush. Have to be creative with securement because they do not sit flush

Nice Terminals

Written by: TBON from Texas on May 15, 2015

Crutchfield Customer Review (What's this?)

these worked perfectly and provided a solid electrical connection. I was worried that maybe the color was some sort of coating/anodizing that would add resistance, but if it did, it wasn't measurable. Nice terminals, reasonable price.

Pros: Easy, reusable ring terminal, heavy gauge, good conductor

Cons: None that I can think of.

Great

Written by: Blake T from McKinney, Texas on May 8, 2015

Crutchfield Customer Review (What's this?)

Just what I was looking for, I was kinda spectacle about it but when they showed up they were perfect.

Pros: Exactly what I needed

Cons: May be a bit to big.

T-Spec Set Screw Ring Terminals

Written by: Lucas from Minnesota on April 14, 2015

Crutchfield Customer Review (What's this?)

Item as described and works great. Would recommend to anyone for clean and simple car audio installation.

Pros: Quality product, makes car audio installation much easier.

Cons: Price

amp end for hot wire to battery

Written by: justin h from broadway va on April 10, 2015

I recently broke my hot wire end off and needed another. I walked into Crutchfield and was just going to look for them myself but soon as i walked in i was greeted and asked if i needed help. He directed me right to what i needed. Great service. And there also very durable and reuseable. If for some reason i need another one, im buying the same product. I have no worries that itll break or anything

Pros: Durable, very strong, reuseable, no crimping required

Cons: None at all

Great terminals

Written by: Jrod from Phoenix, AZ on April 9, 2015

Crutchfield Customer Review (What's this?)

These are awesome. The look nice, and I like the simple lock nut fastener to clamp on the wire. It's easy and secure.

Pros: Looks great Ease of use Holds wire secure

Cons:

These things are awesome!

Written by: kris B from Texas on February 4, 2015

Crutchfield Customer Review (What's this?)

If you're wanting the most secure connection for your cable this is what you want! They replaced my cheap self-crimped connectors. I'll use these for any install for now on!

Pros: great connection!

Cons: none

T-Spec Set Screw Ring Terminals

Written by: mauricio from California on December 15, 2014

Crutchfield Customer Review (What's this?)

great quality terminals, large and wont fit to amplifier

Pros: good quality, very solid

Cons: wish they had smaller terminal ends to fit to amplifier end as well

Great Product

Written by: Hot-Wire from NC on October 22, 2014

Crutchfield Customer Review (What's this?)

Terminals worked just liked they were supposed to. They gave nice clean look and made a nice solid connection. I had to modify center opening making it bigger. I used it on my 4 gauge power wire.

Pros: Nice clean professional look. Solid connection also. Very simple to install.

Cons: Small modification may be needed depending on what terminal is being used for. Still a great product.

T-specs Ring Terminals are Fantastic

Written by: M from Menneapolis, MN on October 21, 2014

Crutchfield Customer Review (What's this?)

These ring terminals are amazing! The price is even better! i used these for my big three. i shopped around for 0 gauge ring terminals and these were the lowest by far and the quality is Competition grade A. from the rubber coverings to the exact true 0 gauge fit even down to the Allen wrench screw that dost strip and is a tight to prevent lose connections. i recommend getting 0 gauge terminals from Crutchfield because the shipping was fast (two days) and customer service was fantastic. Don't be a dummy and get these fantastic terminals for the lowest price possible, from Crutchfield!

Pros: -True 0 gauge for correct fitting -color coded with rubber covering to prevent accidental crossing of wires -Allen wrench screw to assure tight and secure clamping of wires -correct 3/8" terminal hole

Cons: -Coated black paint that should be removed by sanding at connection point

Great product

Written by: kyle from PA on October 14, 2014

Crutchfield Customer Review (What's this?)

The terminals were too big for the slots on my amp, i'm not sure if i made a mistake and bought ones that were too big or if they're gauged for a bigger amp. I have 4 gauge wiring. I had to have a friend of mine do some metal work and thin them down and make them a bit skinnier so i could use them.

Pros: Awesome solid connection Looks way better than bare wires

Cons: They were too big for my amp

awesome

Written by: stan from michigan on August 28, 2014

Crutchfield Customer Review (What's this?)

these things make installation a breeze and look so much cleaner than bare wires

Pros: looks good easy to use

Cons:

Great product

Written by: Anonymous from Ogdensburg,ny on August 21, 2014

Crutchfield Customer Review (What's this?)

Great product!!! Worked like it was advertised!!!

Pros: Better connection!!!

Cons:

Very Simple

Written by: G from Alabama on June 4, 2014

Crutchfield Customer Review (What's this?)

These terminals were very simple to install.

Pros: Secure wire very well.

Cons: None

Set screw ring terminals

Written by: ltsmelto from bend or. on February 20, 2014

Crutchfield Customer Review (What's this?)

Great rugged product. Solid construction

Pros: heavy construction sold materials. Deep socket for wire.

Cons: 4 ga opening is a little small.

Great Product. Be sure to check fit first!

Written by: Taylor C. from Dyersburg, TN on January 9, 2014

Crutchfield Customer Review (What's this?)

I got those terminals to improve the cleanliness of my build and because this in my daily driver also to decrease the time it takes to remove or replace my amplifier for when I need the extra space. I got these terminals for a Kenwood 7205. This amplifier has a flat power wire connection, instead of the tubular variety. The amplifier lists that it accepts 4 gauge, but it does not accept these terminals. They are slightly too wide. Also a little to thick for the factory bolts to reach all the way through. These terminals aren't overly large, I think the kenwood is just a little small. I highly recommend these terminals!

Pros: Build Quality, Ease of Use, Appearance, Price

Cons: Doesn't fit all amplifiers (even some that accept 4 gauge.

Details

Hands-on research

What's in the box?

  • Two flat-black set-screw ring terminals for 4 AWG wire
  • 2 Rubber insulators

Product Research

Features

Overview: This package includes a pair of T-Spec v10-series ring terminals for your power cables. The terminals have a flat black finish, and can accommodate 4 AWG wire. A rubber insulator is included with each ring terminal.

Set Screw: The terminals have a heavy duty set screws to securely hold the power cable in place. A 3mm Allen wrench is required to tighten or loosen the set screws.

Polarity: The ring terminals have a band around them to mark the polarity. One terminal has a red band and the other has a blue band.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Wanted to get better ground connection. [ DAVID  Apr 12, 2016 ]
Plugging bare wires straight to your amp can sometimes come loose and if you want to disconnect your cables you will need to cut and remake the cables again. In order to have a more secure connection and avoid having to remake the cables, I chose to use the screw ring terminals. [ RENEL  Apr 11, 2016 ]
to install right [ harold  Mar 23, 2016 ]
complete my amp install. [ thomas  Feb 07, 2016 ]
These terminals have a very clean and durable look. I am installing them on an off-road vehicle and need something that will hold up and not come loose due to vibration. [ Danen  Jan 01, 2016 ]
Plugging bare wires straight to your amp can sometimes come loose and if you want to disconnect your cables you will need to cut and remake the cables again. In order to have a more secure connection and avoid having to remake the cables, I chose to use the screw ring terminals. [ RENEL  Apr 11, 2016 ]
to install right [ harold  Mar 23, 2016 ]
These ring terminals look really cool and are super affordable. For heavy gauge wire, I prefer them to crimp or solder type ring terminals. You may have to modify your battery post, or purchase adaptors. I have the GM style side terminal batteries and just replace the pain-in-the-neck terminal bolts with 3/8" bolts with a jam nut and they work great. [ Danen  Feb 04, 2016 ]

2 questions already asked

The holes are only about 3/8". I used them to connect to a distribution block. I can't remember if it came with a plastic sleeve, I think it did [ KEN  Aug 23, 2014 ]
Yes I have one on my terminal fits no problem [ KERTTON  Aug 23, 2014 ]
Hi Nick, The holes do not fit on the actual battery terminal but they do fit the screws that tighten down the battery cables. That's where I put them. [ MICHAEL  Aug 22, 2014 ]
Yes to both of your questions. [ JAJA  Aug 22, 2014 ]
No plastic tubing . Terminal holes fit over standard 3/8" screw studs but NOT over the large smooth studs on a car battery. [ THUY Q  Aug 22, 2014 ]
Yes they do. [ Antwyan  Aug 22, 2014 ]
Yes they do. [ Antwyan  Aug 22, 2014 ]
they will work with a gm adapter that screws into a side mount battery and they do have plastic covers i used these and works and looks nise [ scott  Aug 22, 2014 ]
Yes it does [ WALTER  Aug 06, 2014 ]
Do you mean capacitor ?Yes it does! [ mauro  Aug 06, 2014 ]
Should work but you would probably need to mount with the ring upside down so it will sit flush. Short answer, yes. [ craig  Aug 06, 2014 ]
Yes [ PATRICK  Aug 06, 2014 ]
To a compactor, I am not sure! If you want to connect to an amp, you will have to shave the brass down to fit! You should be fine, just if you do have to grind down the side it will shave fast so be careful! [ JOSHUA RICHARD  Aug 06, 2014 ]
I used these terminals to connect to batteries & battery switches. I do not have any capacitors in my system, nor have I worked with capacitors for audio systems, so I am not familiar with there shapes. What I can tell you is that these terminals are quite large & well built. I was surprised to see how substantial these terminals are. So... 1) You must ensure that you have some space around your capacitor to use these. They are far bigger than normal crimp on terminals. 2) With normal crimp on terminals, one side is almost perfectly flat with the bottom of the terminal. Example... ------------- ||||||||||||||||| -------------------- With these terminals, neither side is "perfectly" flat because of the large round barrel. ONE side of these terminals is "flatter" than the other, but neither side will fit flush against the top of the battery, capacitor, whatever. Example... ------------- ------ ||||||||||||||||| ------------- [ JOSEPH R  Aug 06, 2014 ]
Yes [ Derek  Aug 06, 2014 ]
Library