About the Axxess AX-SUB28SWC Steering Wheel Control Harness
Axxess AX-SUB28SWC
Axxess AX-SUB28SWC
The AX-SUB28SWC harness by Axxess allows you to connect the steering wheel audio controls in 2015-up Subaru vehicles (if equipped) to a new car stereo without having to splice into your factory wiring. It's compatible with the 28-pin Subaru wiring connector that detaches from the factory radio.
To use this harness, you'll need the Axxess ASWC-1 steering wheel control interface (sold separately) and a compatible aftermarket radio. You'll also need a vehicle-specific wiring harness to install your aftermarket stereo. We'll show you the correct harness when you enter your vehicle information into our online vehicle selector. Warranty: 1 year.
Important Note: This harness allows you to retain your Subaru's backup camera if you are installing a new car stereo with a rear-camera input. You'll also be able to use the handy auxiliary input in your Subaru (if equipped) if your new receiver has a rear RCA auxiliary input.
What's in the box:
Axxess AX-SUB28SWC Steering Wheel Control Harness owner's manual
- 13" SWC harness (for Subaru)
- Installation Instructions
Customer reviews for Axxess AX-SUB28SWC Steering Wheel Control Harness
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Axxess AX-SUB28SWC Steering Wheel Control Harness
Product Research
Features
Retained Features: When installing an aftermarket radio in select 2015-up Subaru vehicles, the Axxess Integrate AX-SUB28SWC harness allows you to retain the following factory features that are normally lost when removing the factory radio.
- Steering Wheel Controls: The AX-SUB28SWC harness allows you to retain your factory installed steering wheel controls without having to splice into your vehicle's factory wiring, using the Axxess Steering Wheel Control Interface (120ASWC1, sold separately).
- Aux Input: The AX-SUB28SWC includes stereo male RCA connectors that allow you to retain your factory installed 3.5mm jack (your aftermarket radio must also have a rear-panel stereo Aux input).
- Backup Camera: In addition, the AX-SUB28SWC harness includes a composite video connector to allow you to retain your factory installed backup camera in vehicles with a factory radio featuring a 6.2" screen (not compatible with Star Link factory radios that feature a 7" screen).
Note: Additional kit and wiring harness will also be needed to complete installation.
Navigation Outputs: The AX-SUB28SWC provides the following navigation outputs to make installing an aftermarket Navigation radio simpler and less time consuming.
- VSS (vehicle speed sense)
- Parking Brake
- Reverse Gear output
Vehicle compatibility: The Axxess Integrate AX-SUB28SWC harness is compatible with the following 2015-up Subaru vehicles.
Make | Model | Year |
---|---|---|
Subaru | Impreza | 2015-up |
Legacy | 2015-up | |
Outback | 2015-up |
Wire Code Chart:
Wire Color | Function |
---|---|
Red | +12 Volt Accessory |
Yellow | +12 Volt Constant |
Black | Chassis Ground |
Blue/pink | VSS (vehicle speed sense) |
Green/purple | Reverse gear |
Light Green | Parking brake |
3.5mm Jack (male) | SWC output |
Yellow Composite Video (male) | Backup camera input |
White RCA (male) | Aux input (left) |
Red RCA (male) | Aux input (right) |
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...