About the Metra AX-TOY28SWC Steering Wheel Control Harness
Metra AX-TOY28SWC Steering Wheel Control Harness
Metra AX-TOY28SWC Steering Wheel Control Harness
Metra's AX-TOY28SWC harness allows you to connect the steering wheel audio controls in 2012-up Toyota vehicles (if equipped) to a new car stereo without having to splice into your factory wiring. It's compatible with the 28-pin Toyota wiring connector that detaches from the factory radio.
To use this harness, you'll need the Axxess ASWC-1 steering wheel control interface (sold separately) and a compatible aftermarket radio. You'll also need a vehicle-specific wiring harness to install your aftermarket stereo. We'll show you the correct harness when you enter your vehicle information into our online vehicle selector.
Once you've connected this harness to your new receiver's rear RCA auxiliary input, you'll also be able to use the handy auxiliary input in your Toyota (if equipped). This adapter will work with select 2012-up Toyota vehicles equipped with steering wheel audio controls. Warranty: 1 year.
Important note: The aftermarket radio you install must have a rear RCA auxiliary input if you wish to retain your factory auxiliary input.
What's in the box:
Metra AX-TOY28SWC Steering Wheel Control Harness owner's manual
- 12" SWC harness (for Toyota)
Customer reviews for Metra AX-TOY28SWC Steering Wheel Control Harness
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Metra AX-TOY28SWC Steering Wheel Control Harness
Product Research
Features
SWC Retention Harness (for Toyota): When installing an aftermarket radio in select 2012-2013 Toyota vehicles, the AX-TOY28SWC harness allows you to retain your factory installed steering wheel controls without having to splice into your vehicle's factory wiring (120ASWC1, required & sold separately). In addition, the AX-TOY28SWC harness includes stereo male RCA connectors to allow you to retain your factory installed 3.5mm jack (your aftermarket radio must also have a rear-panel stereo Aux input).
Note: This is an optional harness; a main power and speaker harness is still required and sold separately.
Vehicle compatibility: The AX-TOY28SWC harness is compatible with the following 2012-2013 Toyota vehicles.
Make | Model | Year |
---|---|---|
Toyota | 4 Runner | 2012-2013 |
Camry | 2012 | |
Corolla | 2012-2013 | |
Highlander | 2013 | |
Matrix | 2013 | |
Prius | 2012 | |
RAV4 | 2012 | |
Sequoia (Nav only) | 2013 | |
Tacoma | 2012 (JBL only) / 2013 (all) | |
Yenza | 2013 | |
Yaris Hatchback | 2012 |
Wire Code Chart:
Wire Color | Function |
---|---|
Red | +12 Volt Accessory |
Black | Chassis Ground |
Light Green | Parking Brake |
Green/Purple | Reverse Gear |
3.5mm Jack (male) | SWC output |
White RCA (male) | Aux input (left) |
Red RCA (male) | Aux input (right) |
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Worked perfectly out of the box for my 2014 Prius C alongside the adapter unit that comes with the Crutchfield add on package. Did not have to do any settings adjustments at all.
Patrick from Oceanside, CA