About the T-Spec V10-RAK8
Power up to specification
Power up to specification
This V10-RAK8 amplifier wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 8-gauge power and ground wires, an 18-gauge turn-on lead, a 17-foot stereo patch cable, a fuse holder, and an assortment of hardware useful for your installation. T-Spec makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.
Oxygen-free virgin copper
Recycled copper often contains impurities that can impair conductivity, so T-Spec uses only oxygen-free non-recycled virgin copper in all their wire to maximize signal and power flow. The high strand count and special PVC blended jacket give T-Spec wire an extraordinary flexibility, making installation easier. The power and ground wires in this kit each come with a sturdy ring terminal machine-crimped to one end, ensuring a secure contact with your car's battery and chassis ground. T-Spec even pre-installed the fuse holder (with a 50-amp fuse included) inline on the power wire, for your safety and peace of mind.
This wiring kit does not include speaker wire. You will need to purchase that separately, in order to complete your amplifier installation.
Product highlights:
- amplifier wiring kit
- all wires made of oxygen-free non-recycled copper
- wires meet all ANSI and CEA standards
- 17 feet of 8-gauge matte pearl power cable with ring terminal
- 3 feet of 8-gauge matte gray ground wire with ring terminal
- 17-foot 2-channel RCA patch cable (double twisted pair for superior noise reduction)
- 17 feet of 18-gauge blue turn-on lead wire
- brass mini-ANL fuse holder with 50-amp fuse installed on power wire
- comes with an assortment of hardware including wire ties, a firewall bushing, and various crimp-on wire terminals
- warranty: 1 year
- MFR # V10-RAK8
What's in the box:
- 15.5' Length of pearl white 8 AWG OFC multi-strand power wire
- 1.5' Length of pearl white 8 AWG OFC multi-strand power wire
- 3' Length of grey 8 AWG OFC multi-strand ground wire
- 2 Ring terminals (mounted to one end of the 1.5' and 3' 8 AWG wires)
- In-line v12 Mini ANL fuse holder
- 50A Mini ANL fuse (installed in fuse holder)
- 17' Length of blue 18 AWG remote turn-on wire
- 17' Stereo RCA cable
- Two 8 AWG crimp-on spade terminals
- White spade terminal boot
- Silver spade terminal boot
- Red 18 AWG crimp-on spade terminal
- Red 18 AWG butt connector
- Firewall bushing for 8 AWG wire
- Eight 3.5" Wire ties
Customer reviews for T-Spec V10-RAK8
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the T-Spec V10-RAK8
Product Research
Features
Overview: This T-Spec v10-series amplifier wiring kit contains enough power and ground wire, RCA cable, turn-on wire, and connection accessories to install a single amplifier in most vehicles. The OFC (oxygen-free copper) wire included in this kit meets CEA-2016 and ANSI specification for wire gauge, and is BC-5W marine compliant. The high strand count gives you maximum flexibility and maximum conductivity. The v10-RAK8 kit is rated to 800 watts maximum power at 14.4 volts.
Contents: This v10-series amplifier kit contains the following:
- Power Wire: 17' v10 8 AWG OFC multi-strand wire in a matte pearl white PVC blended jacket; the wire already has the v12 compact brass Mini ANL fuse holder installed in-line, with a 50A Mini ANL fuse; the battery end of the wire is terminated with a nickel-plated crimp-on ring terminal with a white boot (15mm outer diameter and 8.5mm inner diameter)
- Fuse Holder Dimensions:
- Width: 2-5/8"
- Height: 1-3/8"
- Depth: 1-7/16"
- Ground Wire: 3' v10 8 AWG OFC multi-strand wire in a matte gray PVC blended jacket; one end is terminated with a nickel-plated crimp-on ring terminal with a silver boot (15mm outer diameter and 8.5mm inner diameter)
- RCA Cable: 17' v10 noise-rejecting four-twist RCA cable with precision machined ends and quad-split tip
- Turn-On Wire: 17' 18 AWG OFC remote turn-on wire in a blue jacket; neither end is terminated
- Installation Accessories:
- Two 8 AWG crimp-on spade terminals with white (power) and silver (ground) boots for amplifier connection
- Red 18 AWG crimp-on spade terminal and red butt connector for remote turn-on wire connection
- Firewall bushing for 8 AWG wire
- Eight 3.5" Wire ties
The T-Spec V10-RAK8 replaces these items
T-Spec 8RAK Installation Kit
- oxygen-free non-recycled copper wires
- brass mini-ANL fuse holder with 60-amp fuse
- includes patch cable and speaker wire
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Great Kit! Has what you need to do a clean install! Didn't come with a wire conduit to keep the power cable protected from excess heat under the hood and white, but that's ok. They're cheap and can find it at local auto shop store.
Manny from Boise, ID