About the Pinpoint AM10
These sturdy Pinpoint brackets let you mount a pair of small- to medium-sized speakers on your wall and aim them at your listening position for ideal sound. Each bracket screws into the back of your speaker's wooden or plastic enclosure and supports up to 20 lbs. You can swivel your speakers side to side 180° or tilt them 18° up or down. Nylon fiber construction makes these brackets ideal for either indoor or outdoor use.
Product highlights:
- nylon wall-mount speaker brackets
- supports up to 20 lbs. each
- tilt range: 18°
- swivel range: 180°
- mounting hardware included
- stud-mounting required
- 1-13/16"W x 7-3/8"H x 3-1/8"D
- warranty: 5 years
- MFR # AM10 Black
What's in the box:
- 4 Black wall hinges
- 2 Black slotted arms
- 2 Black solid arms
- 4 Black plastic wing nuts
- 4 Black bolts
- 8 Black self-tapping 3/4" screws
- 8 Black 1-1/2" wood screws
- 8 Plastic red drywall anchors
- Assembly and Mounting Instruction sheet
Customer reviews for Pinpoint AM10
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pinpoint AM10
Product Research
Features
Overview: The Pinpoint AM10/B Speaker Wall Brackets are designed for small to medium speakers up to 20 lbs with wooden or plastic cabinet backs. The AM10/B Speaker Wall Brackets allow you to tilt your speakers 18-degrees up/down and swivel them 180-degrees left/right once mounted. Once the desired angle is achieved, you can lock it in using each bracket's two locking wingnut/bolt assembly. The pair of speaker brackets are made from glass reinforced polymer and can be used indoors or outdoors.
Installation: The Pinpoint AM10/B Speaker Bracket come supplied with all the necessary hardware needed to mount your speakers to your home or office's wall. The speaker brackets are designed to screw into the back of your speaker's wooden or plastic enclosure. The back of your speaker must measure 5.0" in height for the bracket to fit and a screw hole spacing of 4.0625" is needed to secure the four supplied self-tapping screws to your speaker. The brackets mount to your wall using eight supplied wood-screws. The screw hole spacing for the wall bracket is 5.0625" from the bracket's top screw hole to the bracket's bottom screw hole and 3.125" between the two inner screw holes. The set of speaker brackets also come supplied with eight plastic drywall anchors.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
They really looked bigger in the photo, I was shocked though to see them easily hold up my 15 lb polk speakers. To get the angle I wanted though I had to mount them sorta on one side of the speaker instead on the center. I would recommend to anyone with heavy speakers.
Tom from Charleston, WV