Overview: The XS Power D925 is a 12-volt battery that is
designed to be used as a supplemental power source in your vehicle. It can be
used to provide additional power for your car audio system, or can be used in
Terminals Needed: This D-series battery does not come
with battery terminals, so you will need to purchase the proper terminal
adapters to fit the inner diameter of your power ring terminals before
installing. Recommended terminal adapters include: Two 5/16" brass stud adapters
Two 3/8" brass stud adapters (#590),
Two 5/16" + Two 3/8" brass stud adapters (#588),
or Two 3/8" zinc-plated steel stud adapters (#587). You could also choose the
Short Brass Post Adapters (#580)
or the Long Brass Post Adapters (#586).
Absorbent Glass Mat (AGM): XS Power's AGM (Absorbent Glass
Mat) batteries use a fibrous material to suspend the liquid electrolyte against
the lead plates. Because the electrolyte is absorbed in the material, there is
little chance of an acid leak, even in the event the case is ruptured. AGM
batteries contain more lead compared to traditional "flooded" batteries, thus
producing more power.
Installation: In typical car stereo applications, D-series
batteries are installed in the trunk or hatch of the vehicle, close to the
amplifier. A second battery install kit, such as the XS Power
AK2000, can be used to connect the D925. It should be wired in parallel (+
to + and - to -) with your vehicle's battery. Should you decide to mount the
battery under the hood, you will need the
MC-D925 Protective Metal Case to reinforce and protect the battery case. The
925 Billet Aluminum Hold Down (#525) or S927 Mounting Kit (#527) can also be
helpful in mounting the battery under the hood.
i-Bar: The integrated Battery Amperage Rail (i-Bar) system
accessories can be used with this battery in special applications. These include
the i-Bar Top/Side (#551),
Marine i-Bar Top/Side (#553),
Marine i-Bar Top Only (#554),
i-Bar Multi Top/Side (#555),
and i-Bar Multi Top Only (#556).
Charging the Battery: It is very important to
properly charge an Absorbent Glass Mat (AGM) battery before using. Improper
charging can permanently damage the battery, and will void the warranty. The
Power HF IntelliCharger for AGM Batteries (sold separately) has a
microprocessor that monitors the charging process to avoid overcharging, and is
recommended for this battery.
Specifications: The D925 has the following specifications:
- MAX Amps: 2000 amps
- Cranking Amps (at 32°F):
- Reserve Capacity: 55 minutes
- Discharge Capacity: 28 Ah (amp hours)
- Dimensions: Length=6.5", Height=4.92", Width=6.93"
- Weight: 23.54 pounds
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.