1.888.955.6000
 
 
1-888-955-6000
crutchfield.com
Crutchfield

PAC C2R-FRD1 Factory Integration Adapter

Connect a new car stereo and retain factory amp and rear seat system in select 2005-up Ford, Lincoln, and Mercury vehicles

Zoom
  • PAC C2R-FRD1 Factory Integration Adapter

    Front

 

Our take on the PAC C2R-FRD1 Factory Integration Adapter

by Zak Billmeier

PAC's C2R-FRD1 radio replacement interface lets you replace the factory radio in select 2005-up Ford, Lincoln, and Mercury vehicles that use the MSCAN databus. You'll still be able to use factory features like Rear Seat Entertainment, Rear Seat Controls, and the THXII amplifier. Warranty: 1 year.

Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this model is compatible with your vehicle.

Note: Most vehicles will require additional installation parts — please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.

 

Hands-on research from the Crutchfield Labs (what are the Labs?)

Product Research
What's in the box?

Download owner's manual

  • Ford radio replacement interface
  • OEM to interface adapter harness
  • SNI-1 RCA filter
  • 2 Female mono-RCA couplers
  • Installation Instructions

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The PAC C2R-FRD1 is an essential installation accessory for select 2005 and up Ford / Lincoln / Mercury vehicles with MSCAN databus radios. Using this interface will enable factory features such as rear seat entertainment (RSE), rear seat controls (RSC) and the THXII amplifier when the original radio is removed. Other features of the C2R-FRD1 include data bus driven retained accessory power (RAP), vehicle speed sensor (VSS) output, illumination, reverse output, parking brake output and a 5-volt regulated amp turn-on for factory installed subwoofers. The C2R-FRD1 also makes use of the factory AUX input jack (if available).

Steering Wheel Controls: If your vehicle has steering wheel controls (and the aftermarket radio is compatible) they can be integrated using the optional PAC SWI-RC steering wheel control interface (541SWIRC, sold separately).

RCA Filter: The audio signal coming from the RSE in Ford/Lincoln/Mercury vehicles is a differential output. Some auxiliary inputs on aftermarket radio have a common ground input that causes distortion in the RSE audio. The audio distortion can be fixed by using the supplied ground loop isolator (SNI-1) between the RSE output from the C2R-FRD1 and the aftermarket radio's auxiliary input.

Compatible Vehicles: The PAC C2R-FRD1 is compatible with the following Ford/Lincoln/Mercury vehicles.

  • 2005-2007 Five Hundred, Freestyle, Montego
  • 2005-2008 Mustang (Shaker 500 and 1000 included)
  • 2006-2008 Explorer, Fusion, Milan, Zephyr, Mountaineer
  • 2007-2008 MKX, MKZ, Navigator, Sport Trac, Edge, Expedition
  • 2008 Escape, F-250, F-350, F-450, Taurus (X), Marnier, Sable

Note: 2008 F250/350/450 with XL trim package are not compatible. If the vehicle is equipped with the Sony factory stereo system, adjust the fader to your preferred front/rear setting before the factory radio is removed. Neither the aftermarket radio nor the C2R-FRD1 interface has the ability to adjust the factory amplifier's fader. Please see Crutchfield's "Outfit My Car" to confirm your vehicle's compatibility.

Dimensions:

  • Ford Radio Replacement Interface (C2R-FRD1): width = 3.815", height = 1.025", depth = 1.525"
  • RCA Filter (SNI-1): width = 3.645", height = 1.015", depth = 1.525"
 
Review this product
Great Gear Giveaway rewards card

Submit a review and you will be entered to win a $150 gift card

Crutchfield Great Gear Giveaway Official Sweepstakes Rules

PAC C2R-FRD1 Factory Integration Adapter Reviews

Average Customer Review:

55 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Good Product

Written By Artemis, Portsmouth, VA on Wednesday, March 05, 2014
Crutchfield Customer Review (What's this?)
 
My brother installs radios and sound systems for family and friend quite often without any complications and the directions were so unclear that we had to call Crutchfield for support. There were a few wires that we found did not go to anything in my 2005 Freestyle.

My JVC now works beautifully. I just hope to not have to switch radios anytime soon.
Pros:
Allows my new stereo to work very nicely and had the needed wires for the extra interface for my Steering wheel controls to connect to.
Cons:
Unclear instructions. Lack of wire diagrams.
Was this review helpful?    Yes | No
 
5 out of 5

Simple to install

Written By Michael, Independence, MO on Saturday, December 07, 2013
Crutchfield Customer Review (What's this?)
 
Very easy to wire up.
Pros:
Easy to wire
Cons:
A little tight on space in a 2008 Ford Escape
Was this review helpful?    Yes | No
 
4 out of 5

factory integration

Written By wes, ladera ranch on Sunday, December 01, 2013
Crutchfield Customer Review (What's this?)
 
Easy to use. Almost full integration
Pros:
Super simple to connect. Match color to color and plug it in.
Cons:
Ford f150 2011 displays "DVD" constantly once you remove the factory radio. Not sure if it's a flaw in the harness or a result of after-market integration, but its a little annoying. Everything works fantastic as long as you don't mind the oem display not changing to the input you're actually on.
Was this review helpful?    Yes | No
 
5 out of 5

works great

Written By Duane, oshkosh on Monday, November 04, 2013
Crutchfield Customer Review (What's this?)
 
Very easy to install at half the price of other stores
Was this review helpful?    Yes | No
 
5 out of 5

stereo wires

Written By Steve f-350, stamford, ct on Tuesday, September 10, 2013
Crutchfield Customer Review (What's this?)
 
Great product support.. which you'll need because the directions stink ..but made hooking up my new jvc navi/radio a lot eaiser. ..
Pros:
Quick hook up...once you call cructhfield tech support
Cons:
Bad directions...lack detail for the novice radio techie ..
Was this review helpful?    Yes | No
 
4 out of 5

C2R-FRD1 Factory Integration Adapter

Written By RONNIE, COLUMBIA SC on Monday, September 09, 2013
Crutchfield Customer Review (What's this?)
 
Easy enough to install. Designed to fit various levels of the Tribute/Escape/Mariner so there may be extra wires and may or not need wire modifaction. DOES NOT INTERGRATE THE FACTORY DISPLAY.
Pros:
easy to use
Cons:
no designed to use the factory display. Mine had the DVD light on constant and vehicle does have DVD at all
Was this review helpful?    Yes | No
 
5 out of 5

2012 fusion

Written By Emanuel1080, Stephenville, TX on Thursday, August 29, 2013
Crutchfield Customer Review (What's this?)
 
A little confusing upon first glance until I realized that not all the wires in the harness were to be used. All in all an easy install
Was this review helpful?    Yes | No
 
4 out of 5

PAC C2R-FRD1

Written By Anonymous, Lexington NC on Sunday, August 18, 2013
Crutchfield Customer Review (What's this?)
 
Looks a little intimidating at first but really fairly simple with the master sheet Crutchfield supplies
Pros:
Very straight forward with master sheet
Cons:
none
Was this review helpful?    Yes | No
 
5 out of 5

Seems to Work

Written By kamprtuggr, Northern Illinois on Saturday, July 27, 2013
Crutchfield Customer Review (What's this?)
 
Does its job
Pros:
N/A
Cons:
N/A
Was this review helpful?    Yes | No
 
5 out of 5

2009 Mustang GT with Shaker 500

Written By Twomoon, Los Angeles, CA on Tuesday, July 16, 2013
Crutchfield Customer Review (What's this?)
 
Kit arrived fast and was truly plug and play. Radio and OEM amps all worked flawlessly. Thanks.
Pros:
Truly plug and play.
Cons:
None
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

It works

Written By RichS, St Louis MO on Friday, July 05, 2013
Crutchfield Customer Review (What's this?)
 
Worked fine after I read ALL of the instructions.
Pros:
Works. Crutchfield tech support excellent
Cons:
none
Was this review helpful?    Yes | No
 
5 out of 5

PAC C2R-FRD1

Written By MartyM, Bel Air MD on Sunday, May 19, 2013
Crutchfield Customer Review (What's this?)
 
Instructions for wiring were a bit confusing or lacking. Crutchfield Support was great making sure I had it wired correctly.
Pros:
Once wired made installation easy.
Cons:
Written instructions could be clearer
Was this review helpful?    Yes | No
 
3 out of 5

Works great, needs LABELS/INSTRUCTIONS

Written By Paula F., Fairfax, VA on Wednesday, April 24, 2013
Crutchfield Customer Review (What's this?)
 
Works alright so far. Used to connect aftermarket stereo to 2012 base model Ford Escape. I wish it came with a few caps for the wires you don't use, or at least CLEARER instructions.

Eventually got it worked out between a few people. Should have just called the good CF support people :)
Pros:
Works
Cons:
No instructions
Was this review helpful?    Yes | No
 
5 out of 5

PAC C2R-FRD1 Factory Integration Adapter

Written By Art, Grants Pass, OR on Friday, April 12, 2013
Crutchfield Customer Review (What's this?)
 
Installation would have been impossible without this interface. Instructions were clear and with a bit of assistance from tech support installation went well and no problems.
Pros:
Works exactly as advertised
Was this review helpful?    Yes | No
 
5 out of 5

C2R-FRD1

Written By DAP39, Norwalk, CT on Friday, March 22, 2013
Crutchfield Customer Review (What's this?)
 
Used this item in a 2008 Ford Mustang with Shaker 500 system installing a Pioneer Avic X940BT. Install was a breeze and the 5 amp diode which is needed for this application is now already installed by PAC in the wiring harness so there is no need to got to a bix box store anymore to do it yourself. Be warned that the illumination wire from a Pioneer unit to the illumination wire on the PAC harness WILL NOT WORK, the display will flash alternately between day and night mode when headlights are turned on. Ultimately after calling tech support at Pioneer, PAC and Crutchfield you will probably be offered a new module but take heed and don't waste your time with that because it is not the module. The ONLY FIX for the dimming problem is to run a wire from the illumination on the unit to your headlight switch, dimming function will then work fine! ( On the 2005-2009 Mustang with Shaker 500/100 it is the Tan/White wire on Headlight Switch).
Pros:
Works Great, easy install
Cons:
Dimmer function wire will not work with PAC module in certain applications, you must run wire from Head Unit to headlight switch.
5 out of 5 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Simple install

Written By Patrick, San Antonio on Monday, March 11, 2013
Crutchfield Customer Review (What's this?)
 
Easy to install, good instructions, works great. Makes hookup a snap. this was I don't have to cut into my factory harness.
Pros:
Saves the factory harness, makes my factory audiophile system work flawlessly.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Need Clear Instructions

Written By Anonymous, CT on Tuesday, January 29, 2013
Crutchfield Customer Review (What's this?)
 
The adapter harness works great after the install. Clear directions are lacking, You know when you bought something from Ikea and you have parts left. Your thinking to your self hmmm is this really needed??? Well I had wires and adapters left, and did not know if I needed them or not for my install. I would of hated finding out after the fact, I needed them after I put everything back togther or worse It's not working correctly and can't figure out why. I found it difficult to clearly understand what adapters and wires I did not need without calling for help. A clearly marked wiring, adapter & type install guide would have been great.
Pros:
Once wired, worked like a charm. With the harness you can tie off and organize wires before the install. Putting back original radio will be easy.
Cons:
Harness wiring & adapter guide is vague... Would have been great, to have the kit clearlly mark what each adapter is used for in each type of install. [Just 4 speakers that came with the car, 1 with more more speakers or steering wheel controls]. A master install sheet showing the types of installs & wires guides that go with each type of install would be helpful
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

So easy

Written By Carmine L, Brooklyn NY on Thursday, September 20, 2012
Crutchfield Customer Review (What's this?)
 
Made everything so easy. Just had to solder nearly 15 wires together and then it's all plug and play!
Pros:
Easy installation, easy directions (for the most part)
Cons:
It was unclear what to do with the AUX and RSE RCA cables. Directions need to be a bit clearer on that. And a few of the wires too. Otherwise I'd give it 5*
Was this review helpful?    Yes | No
 
4 out of 5

Pac system

Written By BillR, Leander, Tx on Tuesday, September 18, 2012
Crutchfield Customer Review (What's this?)
 
Simple plug and play
Pros:
Easy instruction and easy to hook up.
Cons:
Display on Car shows temp always at 50 and always on DVD
Was this review helpful?    Yes | No
 
3 out of 5

PAC Ford Radio Replacement Kit

Written By mtmnjde, Newark, DE on Sunday, August 26, 2012
Crutchfield Customer Review (What's this?)
 
This harness had the same connectors used in the stock harness and the wiring was long enough to support splicing the connectors together.
Pros:
The harness included all the wiring need to connect the head unit to the stock harness.
Cons:
The SN1, was not required
Was this review helpful?    Yes | No
 
4 out of 5

good product

Written By chris, WV on Tuesday, August 14, 2012
Crutchfield Customer Review (What's this?)
 
Take your time to wire it up. I didn't need all the wires for my install. But all in all it made the instillation quite easy. only had one problem but one quick call to crutchfield took care of it. If they say u need this U NEED IT.
Pros:
Makes install in 2010 F150 easy.
Cons:
The old screen now says dvd all the time.
Was this review helpful?    Yes | No
 
4 out of 5

Great Product

Written By RickH, Richmond, VA on Friday, August 03, 2012
Crutchfield Customer Review (What's this?)
 
Works as advertised. I soldered and heat shrinked all the splices. After first install sub-woofer did not work. One call to tech support and one more wire to solder. Instructions were a little confusing. All works fine now.
Pros:
Makes replacing radio easier.
Cons:
Instruction are sort of hard to follow. Had instructions from head unit, PAC and steering wheel control. Instructions were not the same. Had to get help from tech support. After several call all worked perfectly.
Was this review helpful?    Yes | No
 
3 out of 5

Nice product

Written By DP, WI on Friday, July 20, 2012
Crutchfield Customer Review (What's this?)
 
This is a nice product, but does require some work to install. After soldering and heat shrinking all the splices into the head unit hardness, I figured the rest of the wiring would be a piece of cake. Well, as others have mentioned, the install instructions are very lacking and when it came time to hook the OEM door subs I had to call for help. We were able to figure it out, but I surprised by the lack of their lack of knowledge as I would have assumed this had been installed before into this application. I also ran into an issue after everything was installed with the head unit backlight illumination flickering on/off whenever the car lights were turned on. After a call to tech support, they were unsure if it would work through the PACs box, so they another one to test. Although they send me another one the following Monday, my car sat tore apart for 5 days while waited its arrival... only to find the exact same problem with the new PACs box. There is another option that includes hardwiring the illumination line to the headlight switch/line. Once again, I can't believe this was not known
Pros:
Simplifies the install
Cons:
Install instructions were terrible and incomplete
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Great product

Written By Craig H, Parkville, MD on Saturday, July 07, 2012
Crutchfield Customer Review (What's this?)
 
When I hooked this up to the new radio, it interfaced perfectly with the vehicle wiring. This unit made the entire process east and quick.
Pros:
Fast and easy
Cons:
Instructions aren't real clear. You need to study them carefully before linking the wire together
Was this review helpful?    Yes | No
 
5 out of 5

Perfect fit 2006 Mustang Shaker 500

Written By Ben C, RI on Saturday, June 23, 2012
 
Everything connected perfectly fine including the parking brake wire. I don't know if PAC finally fixed the issue with the shaker 500s and the 1 amp diode but I noticed there was a diode already installed on my kit so I didn't put one in and there is no "poping" sound from the subs and they sound great.
1 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

PAC interface

Written By Larry L, Port Charlotte fl. on Friday, June 08, 2012
Crutchfield Customer Review (What's this?)
 
2005 mustang GT install with kenwood deck. Solder 1amp diode inline w/ white-green wire and follow deck & PAC kit wiring line diagram. Install your new deck and enjoy : ) worth every penny.
Pros:
Fantastic products. Very easy to install
Cons:
None
Was this review helpful?    Yes | No
 
4 out of 5

Decent harness - not too hard to solder and hook up

Written By InnrGeek, Arnold, MD on Monday, June 04, 2012
Crutchfield Customer Review (What's this?)
 
Good harness. Yes, I had to solder the wires because I'm a stickler for good work and I don't trust the clamp-on ones. I am a bit nervous about the extra housing coming loose over time, but I think it will be ok.
Pros:
easy
Cons:
possibly a bit loose feeling?
Was this review helpful?    Yes | No
 
4 out of 5

PAC C2R-FRD1 Factory Integration Adapter

Written By Kenny, Texas on Sunday, April 29, 2012
Crutchfield Customer Review (What's this?)
 
Very easy to install. No brainer. Works as advertised Only complaint is that the old in dash radio display now shows DVD all the time.
Was this review helpful?    Yes | No
 
4 out of 5

2005 Mustang - Shaker 500 replacement

Written By PJB, Munford, TN on Thursday, March 22, 2012
Crutchfield Customer Review (What's this?)
 
I would like to see PAC fix the issue with the feedback on amplified factory subs. While soldering a diode into the harness was no big deal it WAS one more thing to do. Without a rear seat entertainment the RCA filter was not needed either. With that being said, after taking the time to solder all of the connections (and the diode), installation was an absolute breeze and everything WORKED! A MUST HAVE if you want to retain factory features and still be able to control the outputs to the factory subs of a shaker 500/1000 system
Pros:
Plug it in and GO! Retains factory features.
Cons:
Required slight modification Some parts were not needed
Was this review helpful?    Yes | No
 
5 out of 5

Ford Radio interface

Written By Ford Radio Interface, Austin on Tuesday, March 20, 2012
Crutchfield Customer Review (What's this?)
 
I had my radio professionally installed. The technician had previously told me that we would be needing this, and he was right. He had no problem at all using this.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

A must for Mustang Shaker stereo system

Written By Sancho63b, APO K-Town, Germany on Friday, March 16, 2012
Crutchfield Customer Review (What's this?)
 
I think that this is an awesome product but I don't think it should be my responsibility to modify it in order for it to work properly. Yeah, it's a cheap fix installing a diode in between two wires but still. If the company knows about this issue already why are they not fixing it during production? Makes no sense to me.
Pros:
Provides you with everything you need and don't
Cons:
Doesn't really tell you how to install it.
Was this review helpful?    Yes | No
 
4 out of 5

An absolute must for the Shaker 500 / 1000

Written By Pat F., Tumwater, WA on Wednesday, February 29, 2012
Crutchfield Customer Review (What's this?)
 
I gave this a 4 stars because of the ease with which this unit allowed me to integrate new head unit (Sony XNV-770BT) into my 05 Mustang w/ the Shaker 1000 system. That said, when I opened the box, the internals in the actual interface unit (the larger of the two "boxes" in the photo) came out of the housing. It was necessary to clean the dried adhesive out of the housing, which just flaked off, and super glue the internals into the unit. Once this was done it worked flawlessly. I had already read about the need for the diode, so I had it on hand (less than a buck at Radio Shack) and soldered it into the appropriate wire. I soldered the harness into the Sony harness and it worked as advertised.
Pros:
Seamless integration into factory system. Made install a breeze.
Cons:
PAC needs better quality control and should supply the diode in the kit, with the necessary instructions.
Was this review helpful?    Yes | No
 
4 out of 5

Great but More Information Should Be Included

Written By Anonymous, West TN on Wednesday, February 08, 2012
Crutchfield Customer Review (What's this?)
 
A must for installing a head unit. However, additional information should be included with the kit. There is a TSP bulletin that is on PAC's website, but not included with the packaging. You have to solder a 1 amp diode on one of the wires in order for it to work properly. Very easy to do, but at this point, shouldn't it have already been fixed by the company?
Pros:
Easy to install head unit
Cons:
Additional work needed but not included in instructions.
Was this review helpful?    Yes | No
 
4 out of 5

Universal fit means unused parts you pay for.

Written By Chris B., Bethlehem, PA on Tuesday, February 07, 2012
Crutchfield Customer Review (What's this?)
 
Many people I know with the factory Shaker 500 system in the Mustang have used the $15 stereo harness adapters from the auto parts stores for aftermarket stereo installs with success and had no issues. They kept their factory subwoofer amps. However this adapter allows you to adjust your subwoofers independently and also makes the install easy. I'm amazed at the price for this adapter since some of the parts aren't used for my application and in reality the cost to manufacture this is probably not much more than the basic stereo wiring harness adapter for Ford vehicles. They need to make a kit that isn't universal and instead has just the parts needed for your application. I didn't use the RCA connectors or the box with RCA connectors in it. Those are for other vehicles.
Pros:
Allows you to adjust your factory subwoofers separately from the other channels.
Cons:
Expensive for just being a little circuit board in a black box. PAC still hasn't updates the unit with the diode needed for some factory stereo systems, so you have to add that part yourself after buying it at an electronics component supply store.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

A Must

Written By Old Ed, LA on Wednesday, January 25, 2012
Crutchfield Customer Review (What's this?)
 
Although this kit contained some components I didn't require, it is a must to avoid headaches. This was the second HU I have installed and this kit was much more complex than the previous. A quick call to Crutchfield support answered my two concerns taking the complexity out of the preparation.
Pros:
This product along with Crutchfield support is well worth the money.
Cons:
This is a "fitzall" kit making it confusing for the novice. Don't let any extra parts bother you.
Was this review helpful?    Yes | No
 
5 out of 5

Great for self install!

Written By David B, Deland,Fl on Thursday, September 01, 2011
Crutchfield Customer Review (What's this?)
 
Made installation tons easier. Highly recommended to install by yourself.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

ALLWAYS BUY THIS KIT

Written By Keith, New Orleans on Saturday, August 20, 2011
Crutchfield Customer Review (What's this?)
 
Never install a radio without buying this kit. You simply attach your wires from your new radio to this wiring harness adaptor(s) and it makes you installation a snap. I have installed many radios over the years and I wish this was available years ago. Trust me, buy this every time!!!

2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

not as bad as people say for the mustang

Written By Seamus, maryland on Wednesday, July 27, 2011
Crutchfield Customer Review (What's this?)
 
i got this product yesterday for my 06 mustang even with all the problems said if you take your time get on the pac audio website for the product theres a technical bullitin saying exactly where to put the diode and it works perfect even though it expensive and you have to modify still worth it. i recommened this still unless your lazy.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

Wiring harness works but has problem with shaker 500 on mustangs

Written By big mike, Cali on Friday, June 17, 2011
Crutchfield Customer Review (What's this?)
 
this harness is easy to install. Has one big problem with shaker 500 system on 2006 ford mustang. On high volume the volt gets backfeeded to the receiver and causes it to repeatedly shut off. Solution is to install a diode on the wire that turns on the amp. The green and white wire. After that it should work ok
7 out of 7 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

PAC C2R-FRD1 Factory Integration Adapter

Written By Tuner, Md on Tuesday, May 10, 2011
Crutchfield Customer Review (What's this?)
 
Needed for my 2010 Expedition. But , I did'nt need everything supplied. Check
w/Crutchfield if you're not sure. Otherwise, it can look intimidating.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
1 out of 5

PAC C2R-FRD1 Factory Integration Adapter

Written By GeraldP, Wichita, KS on Thursday, April 07, 2011
Crutchfield Customer Review (What's this?)
 
This product doesnt work with a 2006 Mustang GT. It cost me this much and had to be modified. I consulted Crutchfield and an additional harness was shipped with the same result. I am using all stock equipment with the exception of the aftermarket head unit. Clarion CX501. With the subwoofers connected and volume level up, It will cause the head unit to shut off and return only when the volume is decreased. I had to add a diode to the amp on wire to cure this problem. Shouldn't this diode not be in the harness?? Disatisfied with the cost and not working properly. I have also heard of this problem from others with the same set up as I.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

PAC C2R-FRD1 Factory Integration Adapter

Written By Oswald, Ridgecrest, CA on Tuesday, March 15, 2011
Crutchfield Customer Review (What's this?)
 
Great harness, it works well! Only ran into the problem where I had trouble unplugging one of the connectors. Not a big deal.
Was this review helpful?    Yes | No
 
5 out of 5

Get it!

Written By Jeff, Illinois on Sunday, March 13, 2011
Crutchfield Customer Review (What's this?)
 
Can be a bit intimidating if first time installing a stereo yourself, but it is a real
necessity if you want to make life easier on yourself. I've used this installation
kit a couple of times now and it works great.
Was this review helpful?    Yes | No
 
2 out of 5

Missing Vital Technical Service Bulletin

Written By Nelson, Simi Valley, CA on Friday, March 11, 2011
Crutchfield Customer Review (What's this?)
 
Bought this with a Pioneer Z-120BT to install in my 2006 Ford Mustang GT with Shaker 500 factory audio system. Wiring diagram was straight forward, and there seemed to be no problems with its integration. But I soon discovered that the headunit would reboot at higher volumes, specifically when heavier bass was present. I completely undid my installation on two seperate occasions to try and find what was wrong. I almost sent the headunit back to Crutchfield because I believed it was defective.

What was defective were the instructions for this adapter. After MUCH searching on the internet, I discovered there is a TSB issued for this unit that addresses the exact issue I was having. A 1 amp diode needs to be soldered into a specific line to keep voltage being fed back by the subwoofer amps, which either momentarily disables the sub's or makes the unit reboot.

It's very frustrating to realize how much time I've wasted for nothing, when they could've included this information just like they address the ground loop isolator and rear seat entertainment system issues. So this unit gets four stars because I have to modify it when it's brand new, and one star for the incomplete documentation. Most disappointed, but at least now I know what's wrong.

[Editor's Note: Thanks for bringing this to our attention. We have confirmed this information with PAC, and added it to our database.]
18 out of 18 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

PAC adapter for 2006 Mustang

Written By MAR302, Liberty, MO on Monday, February 28, 2011
Crutchfield Customer Review (What's this?)
 
Very good product and easy to hook up with a little help from Crutchfield.
Was this review helpful?    Yes | No
 
5 out of 5

Makes navigation install simple

Written By JOTN, Virginia Beach on Thursday, February 24, 2011
Crutchfield Customer Review (What's this?)
 
This sure made a navigation install simple. The last one I did, it took me all
day to run wires into the engine compartment, back to the trunk, and to the
parking brake. This has them all right where I needed them by pulling the
information off the CAN-bus.
Was this review helpful?    Yes | No
 
1 out of 5

Parts not needed

Written By Anonymous, SAN ANTONIO, TX on Monday, January 31, 2011
Crutchfield Customer Review (What's this?)
 
This expensive wiring harness was recommended to interfac with 2006 Musang with
Mach 500 system. The instructions were terrible, so much that I had take it in to Best
Buy and pay them to install. This wiring harness had parts for interfacing RSE and SWC,
all of which were not needed and have never been an option for the car. Bottom line, I
had to buy the normal wirng harness from Best Buy for $20 which worked just fine.
Was this review helpful?    Yes | No
 
5 out of 5

2005 Ford Five Hundred Hot-Setup

Written By PTN, Abington, Pennsylvania on Monday, October 18, 2010
Crutchfield Customer Review (What's this?)
 
This is certainly an excellent product. Being able to properly solder and insulate all connections between this harness the harness of the head unit (Kenwood KIV-700) while in the comfort of my workshop is without a doubt the way to go. Once the connections are made, installation of the unit itself was only about an hour or so. Instructions / diagrams are pretty good. Most of the wire's color codes actually matched up with the head unit. It was all too easy. Triple checked for mistakes and it worked perfectly. I'm not a big fan of an extra set of "connectors" between the head unit and everything else, but the time and aggravation saved with this set up is well worth it. Now, when I want to re-install the stock double-din head unit, it should only take a few minutes. Make sure you order this harness WITH (at the same time) your new head unit as the price will be half. I did not, however Crutchfield graciously refunded the difference. Finally - if you have steering wheel controls like I do on the Five Hundred Limited - order the PAC SWI-JACK and perform the install at the same time. Most of the original steering wheel functions will be preserved. This complemented the installation making it truly the "Hot-Setup
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

5 stars for sure

Written By billyb, las vegas on Friday, September 17, 2010
Crutchfield Customer Review (What's this?)
 
I found this adapter to greatly ease the installion of my new stereo into my '07
mustang..even has the turn on relay to get rid of the pop sound in the door woofers.It
really made this a plug and play install with no additonal noise what so ever..and the
service was tipically great.Been a customer sinse '83 and never let me down..thanks
again
Was this review helpful?    Yes | No
 
4 out of 5

PAC C2R-FRD1 With JVC KW-XR610 Install

Written By 2005 Mustang GT, Greenville, MS on Friday, July 23, 2010
Crutchfield Customer Review (What's this?)
 
The PAC C2R-FRD1 was needed to use the factory subwoofers that came with the stock shaker 500 system in my 2005 Mustang GT. I think every wire color matched between the PAC and the JVC KW-XR610. All I had to do was slip on heat shrink tubing and solder the wires. This was reassuring, since this was my first stereo installation in 18 years. The PAC worked well, the stereo sounds great, and I can upgrade to a DVD navigation receiver in the future. Since Crutchfield cut me a price break on the PAC because I purchased the PAC and the JVC stereo together, I have nothing to complain about.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Makes life much easier

Written By Mike, Canton, OH on Wednesday, May 26, 2010
Crutchfield Customer Review (What's this?)
 
I purchased this along with my new Kenwood DNX6160 for my 2007 Fusion. It allowed me
to wire up the head unit inside at my leisure, and physically install it in the car in a few
minutes. The included instructions, while not robust, are clear and concise, and don't
require "overthinking".

Since it requires no splicing whatsoever of any OEM wiring, I can revert back to the stock
head unit whenever I please, without needing to purchase any replacement parts or cut any
wires.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
1 out of 5

Lack of Precise instructions

Written By Mike, New Jersey on Tuesday, May 11, 2010
Crutchfield Customer Review (What's this?)
 
Besides the issue of instructions (or lack there of) item is OK.

My issue is with the connection to my car's VSS (vehicle speed sensor). Diagram shows
the wiring and instructions brag that there is a wire dedicated for this, but NO WHERE is
there any comments about when and WHEN NOT to attach this wire. If you attach this
wire and your radio does not need this connection, you might face the many hassles I
went through including the additional time my vehicle was at the installer and the extra
costs I paid as they swapped items out trying to figure out why my 2008 Mustang GT
started having trans problems as soon as radio was installed. BAD TRANS PROBLEMS.

Maybe the installer should have know this before they hooked up the wire as Crutchfield
suggests...maybe not, but as they told me....the instructions are suppose to be easy
enough for anyone to install. There's no way I would have figured this out if I'd had
installed it myself.

As far as the PAC is concerned, I feel you read a sentence and flip a coin to decide if it
fits your needs or not and go on to the next sentence...rinse & repeat.
1 out of 4 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Can't be easier!!!

Written By Gerald, Orlando, FL on Tuesday, June 23, 2009
 
I purchased this interface adapter that was recommended by Crutchfield, while everyone else told me not to buy it, that I didn't need it...

NOT SO!!! This is a must have if you plan on installing a new head unit in your 2008 Mustang. This harness/interface kit makes the install a breeze and just so much easier. You just join the new radio harness to this one and just plug away. Everything you need is there, even the speed, reverse, and ebrake sensor wires. You don't need to fish for any wiring. Its all there and its all plug in. I am so glad I got it!!!!!
8 out of 9 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

PAC C2R-FRD1 Factory Integration Adapter

Written By st577, Cape Coral, Fl on Monday, January 26, 2009
Crutchfield Customer Review (What's this?)
 
This item is a must for any aftermarket HU install made it simple I just soldered up all the like wires by color code and plugged it in. Everything worked perfectly. My HU is a Pioneer avic z3 in a 2006 ford Mustang Gt with stock shaker 500 speakers in the doors and Pioneer premeer speakers in the back deck and two 10" JBL subs in the trunk with a Jbl 600 watt amp. I am still using the stock amp in the doors for the shaker door subs. Great sound, and fully adjustable.
8 out of 8 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Necessary Accessory

Written By Dave, Norwalk, CT on Thursday, October 16, 2008
Crutchfield Customer Review (What's this?)
 
I had to purchase this for my 2006 Mustang with the Shaker 500 system. It worked fine. However, it would be nice if I didn't have to use it at all. Crutchfield says they provide (for free) what you need to install your equipment. Apparently I needed this adapter but it wasn't free. Hmmmmm.....

Also, I purchased a Kenwood head unit for my 2008 Ford Escape (on Audiophile standard radio). Crutchfield sent me "everything I needed", including a harness with one connector on it. However, after I pulled my dash apart and removed the factory radio, to my surprise there were 3 connectors. With the power on, I pulled each one out and discovered that all 3 connectors were needed for the system to work. I called Crutchfield and they informed me that I would need another one of these PAC C2R-FRD1 interfaces. Again, not for free.
67 out of 79 people found this helpful
Was this review helpful?    Yes | No
 

1 question already asked

2008 Mustang GT Shaker 500 Do I need this if I am not using the factory amps? I plan to add my own amps with new speakers and a new head unit. [ Todd  Jan 13, 2014 ]
1 answer
  • For details on installation please contact an Advisor by phone or online chat. They will be able to pull up your vehicle and give you the details on this adapter. They will also be able to tell you if it will be needed with your plan for upgrading the system. [ Jeff Staff  Jan 13, 2014 ]

For a more in-depth review and enhanced detailed information on the PAC C2R-FRD1 Factory Integration Adapter, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_127C2RFRD1/PAC-C2R-FRD1-Factory-Integration-Adapter.html ).

Get live, personalized service from an expert

Crutchfield Advisor: Hi there.

Crutchfield Advisor: We're happy to answer questions or provide additional info about this item.

Advisors also available at 1-888-600-3963

Searches related to the PAC C2R-FRD1 Factory Integration Adapter Connect a new car stereo and retain factory amp and rear seat system in select 2005-up Ford, Lincoln, and Mercury vehicles