PAC TATO Wiring Interface

Install a new car stereo and retain your JBL amp, balance and fade controls, and Synthesis® surround systems (2003-up Toyota and Lexus vehicles)

Item #: 127TATO

In Stock

63 Reviews | 1 question - 1 answer

Your price: $74.99 Earn up to 75 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

View all associated offers

1.888.955.6000

Email

Chat

Does it fit my car?

Select your car

Find what fits your car

Loading...

Got a JBL system installed in your 2003-up Toyota or Lexus? Now you can install an aftermarket stereo while keeping your JBL amplifier. PAC's TATO interface connects your new stereo to the JBL amplifier, letting you retain the use of the Fade and Balance controls in your JBL system.

The interface features adjustable gains, letting you dial in just the right sound from your new stereo, and it's compatible with Synthesis 5.1 and 7.1 surround-sound systems. You'll gain the advanced features of your aftermarket car stereo, while keeping desirable factory functions. Warranty: 1 year.

If you haven't done so already, please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this interface is compatible with your vehicle.

Note: Most vehicles will require additional installation parts — please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.

Hands-on research

What's in the box?

Download owner's manual

  • Digital amplifier turn-on interface for Lexus/Toyota JBL audio systems
  • 24-pin to 20-pin harness with attached 8-pin Din cable
  • 20-pin to 11-pin harness
  • Connections sheet

Product Research

Features

Overview: The PAC TATO JBL amplifier turn-on interface for Lexus and Toyota CANBUS vehicles is designed to retain the use of the factory JBL amplified audio system when the factory radio is replaced with an aftermarket radio. When installing an aftermarket radio with a 4-channel RCA output, the TATO will retain the factory functions of balancing and fading through the factory JBL amplifier. The TATO is also compatible with Synthesis 5.1 and 7.1 surround systems.

Note: Be sure both the front and rear RCA outputs from the new radio are full range.

Vehicle Compatibility: The TATO is designed to work with select Lexus and Toyota CANBUS vehicles that feature a JBL audio system; please confirm fit with theCrutchfield vehicle selector.

Gain Control: For the best sound quality adjustable gains are provided on the TATO for optimal listening. When initially connecting the TATO to the vehicle's JBL audio system, the max output might not meet that of the factory radio. If the volume is low you can adjust the output using the integrated dip switches on the side of the module. It is recommend to use a 4 volt RMS capable aftermarket radio.

Installation: The interface is installed behind the radio, with plug-and-play audio signal connectivity to the factory JBL audio system. A hardwired constant power, accessory power, ground and dimmer lead connection are also provided.

Steering Wheel Remote Compatible: The PAC TATO can be used in conjunction with the PAC SWI-RC steering wheel control interface (541SWIRC, sold separately).

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

PAC TATO Wiring Interface Reviews

Average Customer Review:

63 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Digital amp sounds great

Written By Chetlee, APO, AE on Tuesday, October 14, 2014

Crutchfield Customer Review (What's this?)

Allows me to utilize my digital amp with an aftermarket head unit on my Lexus IS200

Pros: Factory digital amp use

Cons: Bulky, hard to get it to fit neatly in dash

Great interface, follow the instructions

Written By Dr. Choc, Greenwood, SC on Friday, September 26, 2014

Crutchfield Customer Review (What's this?)

Just used this interface to install a Kenwood head unit in our 2004 Toyota Sienna. I did experience some volume loss as others have noted, but the volume adjustment described on page 2 of the instructions solved it for me. A few things I wished I had understood better as an installation newbie: (1) Even though you are purchasing this wiring interface, you still have to make a few (approximately four) wire connections between this interface and the aftermarket stereo, because the interface is specific to the vehicle but not the radio--I just used a wire stripper, crimp caps, and electrical tape; (2) Match the wires color for color; the instructions may use different terminology for the wire function than the radio's manual uses, but the yellow wire goes to the yellow battery wire on the radio, and the red wire goes to the red ignition wire on the radio--not just "accessory"; (3) The 11-pin harness and the bullet connectors are used only if you have additional wiring components. I'm sure all these things are elementary for anyone who has done this before, but they weren't obvious to me when I opened the box and saw all those wires. Overall the installation was easy. Just follow the instructions carefully and don't overanalyze them.

Pros: Works great, does exactly what it says it does.

Cons: A little bulky but actually did not require as much space behind the the head unit as I expected. The instructions could be a little more clear on a couple of points.

PAC TATO Wiring Interface

Written By Terry, Moreno Valley, California on Sunday, September 21, 2014

Crutchfield Customer Review (What's this?)

The wiring enhanced the radio and speaker - nice sound for me

Needs more structural support

Written By DJ Jason, Chicago, IL on Sunday, September 14, 2014

Crutchfield Customer Review (What's this?)

I had to buy another TATO after my first one failed after only 15 months. The cable coming out of the DIN plug lost connection to the front left speakers, even though it was carefully secured behind the dash board. I had to buy a whole new TATO (at full price) to replace a cable that failed on my original TATO (which was purchased at a discount with the original radio purchase).

Cons: Bulky Necessary to get audio from HU to amp Added wiring

Interesting

Written By Interesting, Conifer, CO on Friday, September 12, 2014

Crutchfield Customer Review (What's this?)

Overall I understand the unit needed this interface, but Holy Cow, what a space hog behind the unit in the available space. Took a lot of manuevering to figure it so the unit fit back into the limited space.

Pros: Functionality

Cons: Size! And length of wires. With longer wires I could have placed this added unit in another behind the dash location, run the wires between locations just fine and been done with the install in 1/2 the time. As it is, this is a big Space Hog! But necessary ...

PAC TATO Wiring Interface

Written By Anonymous, Seattle, Wa on Wednesday, August 20, 2014

Crutchfield Customer Review (What's this?)

I was able to put in my new stereo with the old JBL system I had in place. It all worked out perfectly thanks to this item.

Surprised at how easy this was.

Written By NickFank, Oxford. OH on Sunday, August 17, 2014

Crutchfield Customer Review (What's this?)

Had to get this because my 2004 Toyota Sienna came with the factory JBL system. (I couldn't just hook up to the speakers. ) This adapter was a snap to use & made this simpler than any other car audio install I've done. About 20 minutes total.

Pros: Simple, Fast

Cons: None!

PAC TATO

Written By Anonymous, Heflin, Alabama on Tuesday, August 12, 2014

Crutchfield Customer Review (What's this?)

Not happy with the fact that I have to turn radio 3/4 way up to hear music, can turn up all the way and still isn't extremely loud

Pros: Able to remove factory radio and retain factory JBL sound system

Cons: Have to turn volume up way to far to hear music

worked perfectly

Written By heyzarling, Hustisford, WI on Monday, August 11, 2014

Crutchfield Customer Review (What's this?)

This gadget has worked perfectly for me thus far. Maybe a little larger/more cumbersome than I'd like, but I had plenty of room so didn't matter. For what it's worth, I needed the output using a Sony head unit and the car's built in JBL amp (Prius), so the dip switches were appreciated; I went straight to +7 and it sounds entirely adequate.

Pros: Easy, inexpensive, works as described.

Cons: None

No big problems with installation or execution

Written By JonS, Denver, CO on Monday, June 30, 2014

Crutchfield Customer Review (What's this?)

Installed in a 2004 Toyota 4Runner along with a Pioneer head unit. After a call to a very helpful tech support guy at Crutchfield, installation went perfectly smoothly. I am no stranger to working with my hands or with electronics, but I have to admit some intimidation heading into the project. This adapter really helped, though the instructions could have been better. The only problem I had - and it was minor - was stuffing all the components into the dashboard in a way that allowed the new head unit to fit correctly. The various parts of this adapter are relatively large (I'm surprised they couldn't be made smaller), and there's only limited room back there. In the end, everything fit, though, and it's working just fine. Make absolutely sure to turn the factory head unit's volume way up and to center the balance and fader controls before pulling the factory unit. That's supposed to avoid the fading in and out and low-volume problems some have reported.

Pros: Easy installation.

Cons: Printed instructions that came with the adapter could have been better. It's pretty large and was difficult to fit in behind the head unit.

fading in and out

Written By wolmarans, california on Tuesday, June 17, 2014

Crutchfield Customer Review (What's this?)

worked but faded in and out between rear and front speakers when using fading. Also dip switches to increase volume hardly did anything. After trying to get it to work for serveral weeks replaced it with the metra axess jbl adaptor and that worked perfectly first time. maybe I had a bum tato unit i was really rooting for the pac tato but it sucked.

Easy Install

Written By Anonymous, Dallas, TX on Thursday, May 08, 2014

Crutchfield Customer Review (What's this?)

Easy to install clear instructions, just remember not all plugs are used in all applications. 2003 4runner used two of the three plugs.

Pros: Ease of installation

Cons: Not enough db boost

works good

Written By ed, Bakersfield, ca on Saturday, April 12, 2014

Crutchfield Customer Review (What's this?)

I used one of these on my 08 Sequoia with the jbl system and now my 07 camry with the jbl system and it works great

Pros: Works as it should

Cons: N/A

PAC Tato integration adapter

Written By Lupe, Carlsbad nm on Saturday, April 05, 2014

Crutchfield Customer Review (What's this?)

Work great for what I needed it for

Pros: It made my installation a whole lot easier

Cons: None

Factory amp intagration

Written By Anonymous, Columbus, GA on Sunday, March 23, 2014

Crutchfield Customer Review (What's this?)

This is a great product, the only improvement would be a set of RCAs for the factory sub to give more control to the user

Pros: Easy to install

Cons: Kind of bulky and hard to fit behind radio

Perfect...almost.

Written By Eric, Kansas City on Wednesday, March 19, 2014

Crutchfield Customer Review (What's this?)

This factory adapter works perfectly. All the connections are solid, everything works as expected. My only complaint is that there were actually two complete harness assemblies included. One that specifically fit my Toyota Sienna's factory plug (which only used 3 out of the 16 pins/connectors in the plug) and another which didn't terminate in a plug at all, just 16 color-coded wires. As it turned out, while I was opening all my packages - stereo, wiring harness adapters, dash kit, steering wheel adapter - the Sienna specific harness got hidden under some other packaging. My own fault. However, the instructions did not reference the Sienna specific adapter. They referenced the other generic adapter with all the wires and simply said to insert connections into slots 6, 7, and 8 in the Sienna plug. It was clearly illustrated which slots to connect to and which color-coded wires went where, so that's what I did. It took a while to figure out how to insert stripped wires into a pin/plug, but I struggled through and with a little electrical tape, got it done. Connections all worked fine, just like they should. Then, after I get everything installed, dash put back together and I'm cleaning up, I come across the Sienna specific adapter. Well THAT would have been a lot easier! So again, mostly my own fault, but the confusion of including unnecessary parts and referencing them in the instructions loses one star from me.

Made simple

Written By spk, el paso, tx on Friday, March 14, 2014

Crutchfield Customer Review (What's this?)

When I pulled this out of the box, I scratched my head. But after looking at the directions and when I removed my old radio, it made sense. Would recommend to have it mostly hooked up before you try to when installing.

Pros: Made simple to retain everything. Steering wheel controls work great.

Cons: There is a delay when you change a setting, but not that bad. Should include a little more for steering wheel instructions. Maybe a universal type.

Adapter

Written By modell, Charlotte, NC on Tuesday, March 11, 2014

Crutchfield Customer Review (What's this?)

Easy to use

Pros: none

Cons: none

Worked Great!

Written By Jeff P, Fuquay-Varina, NC on Friday, January 31, 2014

Crutchfield Customer Review (What's this?)

This product definitely made installing to my 2004 Toyota 4-Runner factory wiring much easier and robust. 5 stars if it were just smaller.

Pros: Ease of installation

Cons: Size. Please keep working to make car stereo components smaller.

Works as promised

Written By Bob S., San Diego, CA on Thursday, January 23, 2014

Crutchfield Customer Review (What's this?)

The harness was easy to install and work exactly like the description states. I used it to install a JVC KW-NSX700 in my 2007 Toyota Tundra with JBL system and am very happy with the overall sound.

Pros: Easy install. Good price.

Cons: None I can think of.

Good integration product...

Written By Fireray5, Douglasville, GA on Wednesday, January 15, 2014

Crutchfield Customer Review (What's this?)

Well, this product does pretty much what it says, as long as you follow the installation instructions exactly. There are some minor glitches with the sound fading in and out a bit. It's not significant, but you can hear it occasionally. It is worth it if you want to keep using the OEM amplifier with an after-market head unit. Combined with Crutchfield's outstanding tech support, a really good product! Thanks, Crutchfield!!

Pros: Keeps factory amplifier functions (volume, balance, fader, etc.)

Cons: Occasional minor volume fluctuations, bulky

PAC TATO

Written By Martin, Yorba Linda, CA on Tuesday, January 07, 2014

Crutchfield Customer Review (What's this?)

Was easy enough to install, however I was not really satisfied with the power output. The instructions were relatively clear, easily installed in about 45 minutes (including replacing the factory deck). Sound is still good, but would like a little more volume (I did play with the dip switches, but not quite enough volume for my liking).

Pros: easy to install

Cons: not really a lot of volume

For 2006 Tacoma Sport

Written By Peter, Orange on Monday, January 06, 2014

I purchased this product along with the new Pioneer stereo I purchased for my 2006 Tacoma Sport with JBL audio. First of all when I purchased the product, they forgot to give me half of the harness so I was trying to attach wires that didn't exist! Then when they gave me the right product I was easily able to install the harness, however my speakers now sound terrible. I am completely dissatisfied with this product and don't recommend it to anyone.

Pros: Easy Install, kinda.

Cons: Horrible audio sound.

Excellent adapter for factory JBL system.

Written By JCjr, Indianapolis, IN on Thursday, January 02, 2014

Crutchfield Customer Review (What's this?)

Worked perfectly with my new Pioneer HU and the factory JBL system in my Toyota Sienna! No issues making all the wiring connections. However, it would've been much nicer and easier for non-professional installers like myself if there was a specific harness for the HU that didn't need splicing and connecting wires - just snapping harnesses together! I wouldn't mind paying a little extra for that option (if there was one ;)) since I don't do installs everyday.

Pros: Works perfectly with JBL system and makes for better sounding music in the vehicle.

Cons: As I said in my review (which is not so much a Con), it would've been nicer if there was a specific wiring harness that would just snap in place for the HU.

great product

Written By Innkeepr, Waynesburg Pa on Monday, December 30, 2013

Crutchfield Customer Review (What's this?)

great product, easy to follow instructions.

Pros: easy install, connections are positive lock, just like the factory, so there is no worry of them becoming disconnected behind the dash.

Cons: cost ! for as simple as this unit is, the cost is a bit more than expected.

Some splicing required

Written By Anonymous, Virginia on Thursday, December 26, 2013

Crutchfield Customer Review (What's this?)

I gave this 4 stars, it does as advertised but I think it is expensive for what it is. It allows me to use existing amp and speakers

Pros: Works great

Cons: Some splicing was required, that wasn't clear to me at purchase and I thought it was all plug ins. It did make me call Crutchfield support and they were fantastic. So a con for the product equals a pro for Crutchfield :)

a caveman can do it.

Written By Steve P, Valdosta, Ga on Thursday, December 12, 2013

Crutchfield Customer Review (What's this?)

I bought this to install a Pioneer AVH4200 in my truck with the JBL system. I read through the instructions even though I felt I didn't need to. Luckily I did because you need to set your level before unplugging the old radio and learn how to easily set the dip switches. A very easy install and worth every dime just to be able to utilize the rest of the system.

The main problem I had and it was no fault of the adaptor was being able to stuff all of the connectors and the adaptor into the dash behind the radio. Toyota doesn't give you much room.

Pros: Easy to install and set up.

Cons: none

Super Easy

Written By Doug, California on Friday, October 18, 2013

Crutchfield Customer Review (What's this?)

This made the installation easy. It allowed me to use my factory amplifier with a new receiver. I couldn't be happier. Worth every penny.

Pros: Easy to install. Connections are fool proof.

Cons: None that I can see.

PAC tato

Written By B. Lee, Macon, GA on Thursday, September 26, 2013

Crutchfield Customer Review (What's this?)

Works just as advertised. Made for an easy install with no problems!

Adapter

Written By Hippie, Bryan, TX on Sunday, August 25, 2013

Crutchfield Customer Review (What's this?)

Easy installation

Pros: Integrates with factory amp

Cons: None

sucked

Written By greg, USA on Saturday, August 24, 2013

Didn't work and now my stereo sounds like crap. I thought the grass would be greener with this and a new HU but I have all this junk sitting in a corner and I reinstalled the old HU. Nothing gained..

Pros: It sounded so bad that when I installed the old HU back in, I somewhat appreciate it now!

Cons: wasted time having any faith in this crappy unit

PAC TATO Wiring Interface

Written By Davey, Pittsburgh, PA on Tuesday, August 20, 2013

Crutchfield Customer Review (What's this?)

Works very well and simplified the process in my 4runner w/JBL. .

Pros: If following instructions, it works very well

Cons: instructions could be clearer...

PAC TATO IN '03 4Runner

Written By Ed, Chicago on Tuesday, August 13, 2013

Crutchfield Customer Review (What's this?)

Works as it should, just follow directions.

Pros: Functions

Cons: None

Junk

Written By Chris, Houston, TX on Saturday, July 13, 2013

Crutchfield Customer Review (What's this?)

Worked terribly for a few weeks, then just got worse. I installed this to integrate with a 10-speaker JBL system in a Toyota, and the results were awful. The sound quality was quite poor. It sounded like the music was being played inside a can, or with old speakers. Adjusting the pins on the unit and the equalizer on the HU helped a bit, but not much. The factory HU sounded worlds better.

Also, there is a delay when the HU tried to fade speakers and when the factory amp responds. So the navigation, which is supposed to reduce the volume of the music for route instructions, sounds really weird, and sometimes the music gets loud along with the nav voice. Sometimes it wouldn't mute the music at all so you couldn't hear it. Depended on the length of time it was talking.

Then, after about a month, it started going wonky and random times. It would start cutting speakers out randomly, so the music would fade to the back, then to the front, then to the right, obnoxiously. And it started putting static in the front left speakers.

I've had nothing but trouble with it. I'll be pulling it out and just replacing the factory amp and manually connecting some of the speakers to it. It's a shame there isn't a real solution for what is a fantastic factory system. Waste of $.

Pros: Easy to install

Cons: Sounds like garbage

Crutchfield response on Monday, July 15, 2013 We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.

OK, does what it is supopsed to but mixing does not seem smooth

Written By JC, Seattle Area, WA on Friday, June 28, 2013

Crutchfield Customer Review (What's this?)

Works just fine and does what it's supposed to r/e integrating w/my OEM JBL system. One issue and I'm not sure whether culprit is TATO or Kenwood 990HD deck I installed it with, but when adjusting the mix/position of sound field, the audio transition is choppy and uneven vs. gradual and smooth. This does not prevent you from achieving a great mix however. Also the volume is not optimal (seems output is lower than it should be even with the designated dipswitches engaged).

Pros: Works and sounds good

Cons: Mising seems "choppy" and volume output seems low

works in 2005 Prius

Written By CurtJ, Chandler AZ on Thursday, June 27, 2013

Crutchfield Customer Review (What's this?)

Fairly easy to install. Works well. I did not buy the interface for the steering wheel controls, but works fine without it. Needed to set the switches for higher volume.

Pros: Works well

Cons: A bit bulky, but plenty of room in the Prius.

A Must Have ...

Written By Steven T. ..., Irving, Texas on Thursday, June 06, 2013

Crutchfield Customer Review (What's this?)

This Item is a Must Have for a 2005 Toyota Sequoia w/ JBL. It just doesn't work with out it ...

PAC TATO Wiring Interface

Written By Anonymous, Mission Viejo, CA on Friday, April 19, 2013

Crutchfield Customer Review (What's this?)

Having done personal installs for nearly 20 years, this unit made this round the easiest yet. Truly plug & play, factory amps working seamlessly. The only downside is the large control boxes that have to be stashed somewhere.

Pros: Plug & play, makes install a snap

Cons: Bulky control boxes use up a lot of limited space

PAC TATO Design Problems

Written By SteveB, San Antonio, TX on Monday, March 18, 2013

Crutchfield Customer Review (What's this?)

Purchased the PAC TATO to assist in the installation of a new sound system in a 2004 Toyota 4-Runner with a JBL sound system and ten speakers. TATO caused the speakers to cut out and stay off. After much investigation, it was discovered that two of the TATO outputs were too hot (4.75 volts) for the JBL amplifier, which caused it to shut down. Replaced the TATO but the replacement unit did the exact same thing. The problem could be associated to those vehicles with nine or ten speakers.

Cons: Two outputs on the TATO overloaded the amplifier and consequently caused the amplifier to shutdown without any sound from the speakers.

2004 Sienna XLE installation

Written By Erik, Maryland on Monday, February 25, 2013

Crutchfield Customer Review (What's this?)

When i bought my Sienna XLE brand new in 2004, I did not get a Navigation because it only came with leather seats. I'm not a leather seat fan so I planned to install an aftermarket. I looked for a navigation to install that will work with JBL during that time but none were available. Recently, an adapter came along, which was PAC Toyota and worked with my JBL system flawlessly.

Pros: Ease of use

Cons: Long wires. A lot of wires are not necessary if an adapter for the adapter is bought.

TATO

Written By Anonymous, Hampstead, NC on Wednesday, February 06, 2013

Crutchfield Customer Review (What's this?)

Work exactly as advertised.

Worked like a charm

Written By ayzx20, Phoenix AZ on Sunday, December 09, 2012

Crutchfield Customer Review (What's this?)

I have a JBL system in my 2006 Tundra and wanted to replace is with a Pioneer AVH-P3400BH. Crutchfield recommended this unit to allow the existing JBL amplifier to be used. This was a great plug and play solution. Everything works great and my system sounds great. Thanks Crutchfield!

Pros: Easy plug and play

Cons: Kind of a big control unit box. It fit though.

PAC TATO Wiring Interface

Written By Anonymous, 38016 on Friday, November 09, 2012

Crutchfield Customer Review (What's this?)

Very easy to install. Great unit

PAC Toyota Factory Integration Adapter

Written By chrisbru, Coralville, IA on Thursday, November 08, 2012

Crutchfield Customer Review (What's this?)

This is a great product, easy to install. My Kenwood BT645U sounds great with the JBL system in the Corolla now. My only complaint is that the volume can't quite crank up as high due to the 2V head, but the manual does state that it recommends 4V. Overall, I'd recommend it to anyone looking into installing an aftermarket deck in their Corolla with JBL system. I don't have steering wheel controls, so I cannot comment on that aspect of it.

Pros: *Easy to install *Sounds great *Fade/Balance settings still work for all speakers

Cons: *Price *Needs a 4v deck to really take full advantage

PAC - TATO factory intergration adaptor - Tundra PU

Written By Kraig, Los angeles on Monday, June 18, 2012

Crutchfield Customer Review (What's this?)

Work great while they last , installed original Oct 2010. As of June 2012 , I am working on my third one ! 2 failed ! One was under warranty , the other was not (over 1 year ) . Not too happy about the failure rate on these! Installing the 3rd one as soon as it gets here , not fun.

Pros: work great while they last

Cons: high failure rate

pac toyota adapter

Written By joe f, killeen tx on Monday, April 09, 2012

Crutchfield Customer Review (What's this?)

I found the directions very vague and the module to be kindof bulky. I had a hard time trying to fit the module behind the radio.

Pros: Made me able to install my aftermarket radio in my 08 toyota tacoma.

Cons: Very confusing directions, and theres not alot of room for the modules to go.

PAC TATO Wiring Interface

Written By Anonymous, San Diego, Ca on Friday, February 10, 2012

Crutchfield Customer Review (What's this?)

Installed in an '05 Sequoia with nightmare JBL Nav system. Works well, but depending on the head unit you are replacing you may need to wire it differently. On the Pioneer DVD-2300 only plug in the front right and left RCAs and all four channels will play but you will not have fader control. If you plug in all four RCAs, the audio will fade in and out. Had to surf the web to find that out and almost returned it before giving it a try.

PAC - TATO factory intergration adaptor for my Toyota Sienna with th

Written By Mr. Tree, Los Angeles, Calif on Friday, February 10, 2012

Crutchfield Customer Review (What's this?)

Very easy streight plug in to factory plugs without any modification to the original wiring harness. Easy install instructions. Great discoount by Crutchfield when I purchased along with my JVC CD/Tuner head unit.

Pros: Super easy install

Cons: My volume is low, not sure if it is the JVC unit or due to intergration using the TATO

PAC Toyota Factory Integration Adapter

Written By Jerry H, Elk Grove CA on Friday, January 20, 2012

Crutchfield Customer Review (What's this?)

Great little gizmo. Saved a whole bunch of re-wiring. Works perfect with my new stereo/JBL amp. Instructions prefectly clear. All in all a great deal. Thanks to Crutchfield for the professional service and after sale service. The unit was missing from a badly mangled box on the original shipment. Replacement was received the next day.Thanks to the Cruthcfield crew.

Pros: Greatly simplifies new installation.

Cons: None

PAC TATO Wiring Interface

Written By Dreece, San Pedro, CA on Tuesday, October 04, 2011

Crutchfield Customer Review (What's this?)

Easy to install and works great with my new clarion stereo. My only issue was not being able to use the steering wheel audio controls. The plug did not fit....Maybe there is an adapter, but I didn't look into it, as my radio came with a remote control anyway.

Does this work?

Written By Chip, DC on Monday, September 12, 2011

Crutchfield Customer Review (What's this?)

My system sounds GREAT. I would not have ordered this item but the site recommended it and so I bought it and again, the proof is in the sound. My new system sounds a lot better than the original system.

PAC TATO Wiring Interface

Written By Eric, St. Louis, MO on Saturday, March 05, 2011

Crutchfield Customer Review (What's this?)

I had a problem in my 04 4Runner with low volume. I ended up having to add line drivers to
the front and rear channels to make the volume equal to what the factory stereo had. Other
than that, the sound is great!

Tight fit, but works

Written By HappyCamper, Montgomery, AL on Tuesday, February 22, 2011

Crutchfield Customer Review (What's this?)

I used the TATO harness to install a new head unit into my 05 4Runner Ltd. with
6 Disk RDS system. The TATO unit was easy to connect. I followed the
Crutchfield instructions to the letter and had no problems at all. (I maxed out
my volume on the old unit before shutting down and beginning install; no low
volume problems for me)

It all went together, but I agree with some reviewers that it is a tad big and
cumbersome to install behind the head unit. Not a ton of space back there. That
is why I gave it 4 stars instead of 5. Once installed, HU works perfectly and
install kit fits like OEM (Scoshe). After two weeks, TATO unit still works
perfectly. I've tried, but I can't hear any buzz or noise from the TATO or any
other components. Seems well built.

Long story short, this head unit was installed just two weeks prior in my old
vehicle, which is no longer with us. One call to Crutchfield, and I had a super
deal on what I needed to move it to the Toyota. Most retailers would have said
sorry, but not Crutchfield. That is why I keep coming back. I wish I had a
retailer like this for each of my hobbies.

Good Product

Written By mitchell, austin,tx on Monday, December 27, 2010

Crutchfield Customer Review (What's this?)

This went into a 2006 SE 4Runner non-nav JBL/six disk. I was very skeptical
about how the PAC TATO would work and sound after Googling but it was cheaper
than a head unit AND amp install. Man, am I glad I tried it. The unit was
simple to wire (only four connections for me) but a major pain to fit due to the
non-existent room in the head unit cavity of the 4Runner and the size of the
TATO. But, remarkably, it sounds better and plays a tad louder than the stock
JBL system. This is more from the Kenwood HU I installed but the TATO
didn't introduce any noise or other audio anomalies and works as advertised.
Just remember to set the DIP switches as per the manual for your vehicle before
you install it. OIther items from Crutchfield for this install:

Kenwood DNX-6960
Kenwood Sirius Cable
Sirius SCC1 Radio Receiver
Kenwood iPod adapter cable
PAC SWI-JACK (steering wheel control interface that plugs into the TATO)

I didn't give the TATO a 5 star rating because PAC should make the durn housing
smaller.

PAC TATO Wiring Interface

Written By Seth, Dayton, NV on Friday, November 19, 2010

Crutchfield Customer Review (What's this?)

Works great & very easy to install.

Simple Wiring Connection

Written By Keith, St Louis, MO on Saturday, June 26, 2010

Crutchfield Customer Review (What's this?)

I purchased the PAC Toyota Factory integration adapter to connect my new Kenwood 545 receiver to the factory amps. Wiring was easy, although I studied the diagrams for a while and connected everything up on my kitchen table before moving the receiver with adapter to the car.

One recommendation -- check the maximum volume with the radio connected to the car but not mounted; I had to adjust the gain on the integration adapter after installing the radio, but it was an easy 2 minute job to pull the stereo back out and adjust the dip switches.

Overall, easy installation with good sound.

PAC TATO Wiring Interface

Written By Rolf, Wichita, KS on Thursday, June 10, 2010

Crutchfield Customer Review (What's this?)

I put the PAC TATO in a 2005 Toyota Sienna. I had no problems with the wiring. In fact this product worked easily with the SWI-Jack from PAC as well. This allows the steering wheel controls to still work with the aftermarket radio. I have had no problems with either of these PAC products and ample room to place them behind my receiver. I only wish the PAC TATO and SWI Jack were a little cheaper. I did save money installing it myself though.

PAC TATO Wiring Interface

Written By Anonymous, Minneapolis, MN on Tuesday, March 30, 2010

Crutchfield Customer Review (What's this?)

Works great. I have a 2003 toyota 4runner sport with the JBL upgrade. Had it installed with my new head unit and it sounds even better than the old sound system. No problems yet.

PAC TATO Wiring Interface

Written By wilhite, Lynn Haven, FL on Tuesday, January 12, 2010

Crutchfield Customer Review (What's this?)

Product worked (somewhat) for about a week. Produced poor quality sound, and gain adjustments didn't do anything. Failed hard at that point. Put OEM radio back in and system sounds as good as it ever did. Will be switching to a stand-alone amplifier and running wires parallel to the existing wiring harness (bypassing OEM amplifiers). That way I can upgrade the system and still be able to quickly revert to the factory system when I sell the vehicle...

Check your Pre-amp voltage

Written By maragocho, Phoenix, AZ on Sunday, January 10, 2010

Crutchfield Customer Review (What's this?)

Make sure your head unit pre-amp output voltage is AT LEAST 4V. I bought a unit with a 2V preamp voltage and the gain was GREATLY affected. I had to order a different head unit. Luckily Crutchfields customer service is supurb and they swapped the unit out no problem.

Bulky and can't tell the value

Written By Eric, Deerfield, IL on Saturday, March 14, 2009

Crutchfield Customer Review (What's this?)

A lot of plastic to jam into your dash. Had to use plastic tape to keep the large black cord plugged into the unit. Made inserting the receiver a real challenge.

Makes hooking up the stereo easy.

Didn't help the i100 work in the 4Runner. I suppose it is working for the CDA-9886.

Works Great!

Written By NoKz, Los Angeles, CA on Friday, March 06, 2009

Crutchfield Customer Review (What's this?)

Purchased this for my 2005 Tundra Doublecab with the JBL upgrade. It took literally 3 minutes to hook it up to the factory harness and aftermarket head unit. My stock speakers sound better with the new head unit and I keep the factory amp performance. The downside is to keep my steering wheel controls, I have to purchase another unit on top of this one for the same price. Lame.

tinker with it

Written By kevin, rancho cucamonga on Tuesday, March 03, 2009

great product easy to install for me only spliced 3 wires cliped the rest . the only thing is tinker with the balance and fade if you have the 5.1 to get it sounding right

Questions & Answers Ask the community. Share your knowledge.

1 question already asked

The ability to retain steering wheel controls with aftermarket receivers will be determined by the receiver you are using and the vehicle you have. For full information on this type of integration (including the parts you will need) please contact an Advisor by phone (1-800-324-9695) or online chat. [ Krissy  Dec 18, 2014 ]  Staff

Searches related to the PAC TATO Wiring Interface Install a new car stereo and retain your JBL amp, balance and fade controls, and Synthesis® surround systems (2003-up Toyota and Lexus vehicles)