1.888.955.6000
crutchfield.com
Crutchfield

Pioneer Stage 4 PRS-D1200M

Mono subwoofer amp — 600 watts RMS x 1 at 2 ohms

Includes a FREE Pioneer Stage 4 10" sub (a $300 value) Pioneer Stage 4 10" sub (a $300 value)
Zoom
  • Pioneer Stage 4 PRS-D1200M

    Front

  • Pioneer Stage 4 PRS-D1200M

    Group

  • Pioneer Stage 4 PRS-D1200M

  • Pioneer Stage 4 PRS-D1200M

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the Pioneer Stage 4 PRS-D1200M

by Buck Pomerantz
Pioneer

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Pure power from Pioneer

The Pioneer Stage 4 PRS-D1200M mono subwoofer amplifier delivers up to 600 watts RMS, ideal for driving a high-quality subwoofer or two. Its Class D design keeps this compact amp running cool even with a 1-ohm load.

Pioneer PRS-D1200M mono subwoofer amplifier

Read more


Reservoir of power

Custom-made capacitors

Custom-made power supply capacitors store up plenty of energy for sudden peaks, allowing the amp to reproduce heavy bass hits without breaking a sweat. And the PRS-D1200M incorporates all the controls you need to tune your sub to its enclosure and your vehicle. You can adjust the low-pass filter from 40 to 240 Hz, and you can select from three levels of bass boost at 50 Hz. A subsonic filter cuts out everything below 20 Hz, so you don't waste energy on bass you can't hear.


Connections

Heavy-duty, gold-plated block terminals accept your power, ground, and speaker wiring — all terminals and connections are located on one side for easy installation. The PRS-D1200M offers speaker- and preamp-level inputs, so you can connect easily to almost any system.


Multi-Amplifier Synchronization System (MASS)

Pioneer's Multiple Amplifier Synchronization System (MASS) allows you to tie up to four SPL amplifiers together to create the kind of power you need to win competitions. Once connected, an adjustment to the level of the master amplifier also changes the level of all the slave amps in the chain.

Multiple amplifiers

Pioneer's Stage 4 System

Check out all the products in Pioneer's Stage 4 System, including receiver, speakers, subs, and amps.


Highlights:

  • mono subwoofer car amplifier
  • 400 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
  • 1-ohm stable (600 watts in Hi-Current mode)
  • variable low-pass filter (40-240 Hz)
  • wired remote for bass boost
  • selectable bass boost (0, 6, 9, and 12 dB at 50 Hz)
  • CEA-2006 compliant
  • preamp- and speaker-level inputs
  • fuse rating: 40A x 2
  • frequency response: 10-240 Hz
  • requires 4-gauge power and ground leads — wiring and hardware not included with amplifier
  • 11-7/8"W x 2-1/4"H x 9-11/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Performance
RMS Power Output (Watts x Channels) 400 x 1
Peak Power Output (Watts x Channels) 1200 x 1
Power at 2 Ohms (Watts x Channels) 600 x 1
Bridged Power (Watts x Channels) N/A
Minimum Impedance Bridged N/A
Minimum Impedance Unbridged 1
Best Frequency Response 10-240 Hz
THD at Rated RMS Power 1%
Signal to Noise Ratio 92 dB
Input Voltage 14.4v
Features
Amplifier Class D
Low-Pass Crossover Frequency 40-240 Hz
Low-Pass Slope (dB/octave) 18 dB/oct
High-Pass Crossover Frequency N/A
High-Pass Slope (dB/octave) N/A
Bass Boost 0, 6, 19, 12 dB
Bass Boost Frequency 50 Hz
Fan Cooled No
Fuse Rating 80
Speaker Level Inputs Included adapter
Preamp Outputs No
Width (inches) 9-11/16
Height (inches) 2-1/4
Depth (inches) 11-7/8
Parts Warranty 1 Year
Labor Warranty 1 Year
Product Research
What's in the box?

Download owner's manual

  • Class-D mono amplifier
  • Bass boost control (CXC4064)
  • 19.75' Bass boost cable (with RJ14 plugs on each end)
  • 9.5" Speaker-to-RCA adapter
  • 4 Self-tapping screws (4mm x 30mm)
  • 2 Self-tapping screws (3mm x 10mm)
  • 4mm Allen wrench
  • 2mm Allen wrench
  • Owner's Manual
  • Warranty sheet

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Controls
Connections

Features

Pioneer PRS Series: The Pioneer PRS series amplifiers cleanly amplify the music signal, free of distortion or added color.

Independent Signal Circuitry: The Pioneer PRS series amplifiers feature Left and Right independent signal circuitry that eliminates signal interference between the channels and achieves excellent channel separation throughout a wider frequency range.

Custom-Made Power Supply Capacitor Bank: In the quest for optimal bass, Pioneer focused on the PRS amplifier's power handling. With a high-capacity, custom-made capacitor bank adapted to the power supply section, this amp supplies power with rock-solid stability, and does an excellent job of reproducing low-frequency sound.

Linear Technology: The PRS amplifier features this Linear Technology Corporation operational amplifier (OP AMP) used in high-end home audio amplifiers for its precise gain and sound linearity characteristics. The PRS-D1200M includes the OP AMP in its bass boost circuitry to prevent sound quality deterioration.

Class D Amplifier: The PRS-D1200M is a Class D mono amplifier, delivering huge power with low heat and distortion.

1-Ohm Stable: The amp can be connected to loads with impedances as low as 1 Ohm. The lower the impedance, the higher the power output:

  • 400 watts x 1 at 4 ohms (Normal mode)
  • 600 watts x 1 at 2 ohms (Normal mode)
  • 600 watts x 1 at 1 ohm (Hi-Current mode)

Externally Bridgeable: This mono amplifier can be externally bridged--joining two amplifiers together as one--doubling the power to a single woofer or voice coil.

Multi-Amplifier Synchronization System (MASS): Pioneer's proprietary Multi-Amplifier Synchronization System technology allows one amplifier (master) to control the settings of other amplifiers when two or more amps are "strapped" together. This eliminates the need to adjust each amplifier gain separately.

Controls

Hidden Controls: The amplifier is equipped with the following controls and switches on the top of the amplifier under a removable aluminum cover-plate:

  • Mode Select: A 3-way switch to set the amplifier's sync mode (Master, Sync, Sync Inv). A "stopper" must be removed before switching from "Master" setting.
  • Input Switch: The amplifier's input switch allows you to select between inputting an audio signal from a car stereo's RCA preamp output (using optional RCA cable) or a car stereo speaker output (using supplied RCA-to-Speaker adapter).
  • Power Mode: The amplifier's power mode switch allows you to connect 2-ohm to 8-ohm speakers in Normal mode or 1-ohm speakers in Hi-Current Mode.
  • Gain: A rotary control (6.5V to 0.4V) to set the input sensitivity of the amp.
  • Low Pass Filter: The PRS-D1200M has a 40-240 Hz, continuously variable low pass filter to optimize your system's efficiency and delivers the best possible sound quality. This low pass filter has a slope of 24dB/octave.
  • Subsonic: The amp has a 20Hz subsonic filter to remove power-robbing frequencies below the tuning of your subwoofer or enclosure. The subsonic filter has a slope of 18dB/octave.
  • Bass Boost: The amplifier features a selectable bass boost control with a wired bass remote. The bass boost frequency is fixed at 50Hz allowing you select the amount of bass boost right from the driver's seat using the wired bass remote. The level is selectable at 0dB (flat), 6dB, 9dB, or 12dB.

Connections

Connections: All of the amp's connections are located on one side of the amplifier. The connections include:

  • Fuses: two 40A ATO fuses
  • Power: set screw terminal capable of accepting up to 4 gauge wire
  • System Control: set screw terminal capable of accepting up to 10 gauge wire
  • Ground: set screw terminal capable of accepting up to 4 gauge wire
  • Sync Input/Output: stereo RCA jacks for use when "strapping" two or more amps together
  • Input: stereo RCA jacks for line-level input signal (can be used for speaker-level input with included Low-to High-level adapter)
  • Bass Boost: RJ14 jack for use with the supplied wired Bass Boost remote
  • Speaker Output: set screw terminals capable of accepting up to 4 gauge wire

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Pioneer Stage 4 PRS-D1200M Reviews

Average Customer Review:

3 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Matthew O'Brien

Written By Matthew, Parma, Ohio on Wednesday, August 27, 2014
Crutchfield Customer Review (What's this?)
 
For its small size this amplifier has some power. It is definitely enough for my 12 inch sub. I did buy it as part of a amp/speaker combo, so that was the only way I could justify the price! Unfortunately it did not have enough power for the 10 inch sub that came with it. I guess if it was a two ohm model that would have helped.
Pros:
Nice, clean sound
Cons:
High price if it was not a combo
Was this review helpful?    Yes | No
 
4 out of 5

Compact but loud

Written By Good amp, Atascadero Ca on Tuesday, December 03, 2013
Crutchfield Customer Review (What's this?)
 
Great amp easy to install
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Great Bang For The Buck!!

Written By Jason, Atlanta ,GA on Tuesday, May 12, 2009
 
This is a great amp for the cash. I t puts out very clean sound and makes my sub hit lower frequencies than it did with my eclipse amp. This has some of the best audiophile sub bass Ive ever heard. I ve used everything from Rockford fosgate to Infinity. I would highly recomennd using 0 gauge wire to run this even though it only calls for 4 gauge. It never gets hot or shuts down and is very effecient. My lights don't dim or anything. If you can find a deal on this amp JUST GET IT!
12 out of 16 people found this helpful
Was this review helpful?    Yes | No
 

1 question already asked

How do you join two amps together, strapping? [ Demetrius  Sep 05, 2014 ]
1 answer
  • I would not try it! Not many amps are strappable and I don't know if there's any real benefit. If you really want to try I suggest an online search! The amp I was sent a picture of only has so much power. If you want more I suggest a different amp. [ MATTHEW   Sep 09, 2014 ]

Add accessories for the Pioneer Stage 4 PRS-D1200M

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

EFX PA4BX Wiring Kit 4-gauge amplifier wiring kit — includes 2-channel patch cable
2 people say
Your Price: $79.99
Add to Cart
Rockford Fosgate RFK4 4-gauge amplifier power wiring kit
10 people say
Your Price: $114.99
Add to Cart
Rockford Fosgate RFK4X Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire
12 people say
Your Price: $159.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
13 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
29 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
49 people say
Your Price: $0.39
Add to Cart
T-Spec 2-Channel RCA Patch Cables Available in 7 different lengths (20-foot)
25 people say
Your Price: $20.99
Add to Cart
54 people say
Your Price: $9.99
Add to Cart
EFX CFHG4 Fuse Holder In-line AGU fuse holder accepts 4- to 8-gauge wire
Your Price: $9.99
Add to Cart
Rockford Fosgate RFFAGU Fuse Holder Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable
25 people say
Your Price: $10.99
Add to Cart
T-Spec Capacitor 1.5-farad capacitor with red LCD meter
11 people say
Your Price: $79.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
15 people say
Your Price: $19.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
67 people say
Your Price: $9.99
Add to Cart
Pro.Fit Hook Tool Set Installation tools — pair
9 people say
Your Price: $6.49
Add to Cart
Pro.Fit Trim Panel Tool Remove your vehicle's trim panels without damage
87 people say
Your Price: $5.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
31 people say
Your Price: $12.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
52 people say
Your Price: $24.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
8 people say
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart
DEI Heat Shrink Tubing Black 4-foot length (Assortment)
6 people say
Your Price: $24.99
Add to Cart
InstallCard: Amp or Equalizer Prepaid professional amplifier or EQ installation
17 people say
Your Price: $79.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $63.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Pioneer Stage 4 PRS-D1200M, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_130D1200M/Pioneer-Stage-4-PRS-D1200M.html ).

Find the gear that's right for you
 
Ask an expert
Your Crutchfield Advisor knows the gear inside and out.
Call 1.888.955.6000
Ask an expert

Compare with other Pioneer models

  • Pioneer Stage 4 PRS-D1200SPL
  • Want more power?
  • 5 out of 5: In Stock
  • The Pioneer Stage 4 PRS-D1200SPL puts out
    • 1,200 watts RMS at 1 ohm
    • 1,000 watts RMS at 2 ohms
    • 500 watts RMS at 4 ohms
  • Add To Cart
    $599.99
    After $100.00 Price Break
  • Pioneer Stage 4 PRS-D1200M
  • 600W x 1 at 2 Ohms Car Amplifier
  • 4.5 out of 5: In Stock
    • The Pioneer Stage 4 PRS-D1200M offers:
      • 400 watts RMS x 1 at 4 ohms
      • variable low-pass filter (40-240 Hz)
      • selectable bass boost (0, 6, 9, 12 dB at 50 Hz)
  • Add To Cart
    $449.99
    After $50.00 Price Break
  • Pioneer Stage 4 PRS-D1200SPL
  • 1200W x 1 at 1 Ohm Car Amplifier
  • 5 out of 5: In Stock
    • The Pioneer Stage 4 PRS-D1200SPL offers:
      • 1,000 watts RMS x 1 at 2 ohms (500 watts at 4 ohms)
      • variable low-pass filter (40-240 Hz, 24 dB per octave)
      • selectable bass boost (0, 6, 9, 12 dB, variable from 40 to 120 Hz)
  • Add To Cart
    $599.99
    After $100.00 Price Break
You are here
  • Pioneer Stage 4 PRS-D1200M
  • Pioneer Stage 4 PRS-D1200M
  • Compare with
  • $449.99
  • After $50.00 Price Break
  • Add To Cart
  • Pioneer Stage 4 PRS-D1200SPL
  • Pioneer Stage 4 PRS-D1200SPL
  • Get details
  • $599.99
  • After $100.00 Price Break
  • Add To Cart