Pioneer Stage 4 PRS-D1200SPL

Mono subwoofer amp — 1,200 watts RMS x 1 at 1 ohm

Item #: 130D1200SP

In Stock

3 Reviews | Ask Questions

Was:$599.99

Price Break:-$250.00

Your price: $349.99 Earn up to 350 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

Scratch & Dent: $279.99

View all associated offers

Pure power from Pioneer

Pioneer Premier PRS-D1200SPL mono amplifier An SPL (Sound Pressure Level) competition puts unbelievable stress on your amps and subwoofers. Pioneer goes to extreme lengths with their SPL Champion Edition amplifiers to ensure that you'll get massive power, exceptional sound quality, and rock-solid reliability.


Massive power

The Pioneer Stage 4 PRS-D1200SPL mono amplifier can handle low-impedance loads all day long, delivering up to 1,200 watts RMS to a 1-ohm load from a relatively compact chassis. Pioneer uses a Low Current Density design that allows this amp to run cooler even in the most intense conditions. A unique power supply design regulates both positive and negative rail voltages, so you can count on this amp getting the juice it needs during heavy peaks in demand.


Controls and connections

Custom-made capacitors

Custom-made power supply capacitors store up plenty of energy for sudden peaks, allowing the amp to reproduce heavy bass hits without breaking a sweat. The PRS-D1200SPL incorporates all the controls you need to tune your system for maximum efficiency. You can adjust the low-pass filter from 40 to 240 Hz, and you can select from three levels of bass boost, variable from 40 to 120 Hz. A subsonic filter cuts out everything below 20 Hz, so you don't waste energy on bass you can't hear. Heavy-duty, gold-plated block terminals accept your power, ground, and speaker wiring — all terminals and connections are located on one side for easy installation.


Multi-Amplifier Synchronization System (MASS)

Pioneer's Multiple Amplifier Synchronization System (MASS) allows you to tie up to four SPL amplifiers together to create the kind of power you need to win competitions. Once connected, an adjustment to the level of the master amplifier also changes the level of all the slave amps in the chain.

Multiple amplifiers

Pioneer's Stage 4 System

Check out all the products in Pioneer's Stage 4 System, including receiver, speakers, subs, and amps.


Product Highlights:

  • mono subwoofer car amplifier
  • 1,200 watts RMS x 1 at 1 ohm (1,000 watts at 2 ohms, 500 watts at 4 ohms)
  • variable low-pass filter (40-240 Hz, 24 db per octave))
  • wired remote for bass boost
  • selectable bass boost (0, 6, 9, and 12 dB, variable from 40 to 120 Hz)
  • CEA-2006 compliant
  • preamp inputs
  • fuse rating: 40A x 4
  • frequency response: 10-240 Hz
  • requires 1/0-gauge power and ground leads — wiring and hardware not included with amplifier
  • 15"W x 2-5/8"H x 11-1/8"D
  • warranty: 1 year
  • Our 60-day money-back guarantee

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Hands-on research

What's in the box?

Download owner's manual

  • Mono amplifier with attached terminal covers
  • Bass boost control (CXC4064)
  • 19.75' Bass boost cable (with RJ14 plugs on each end)
  • 5 Plastic wire ties (Length=4")
  • 4 Self-tapping screws (4mm x 18mm)
  • 2 Self-tapping screws (3mm x 10mm)
  • 4mm Allen wrench
  • 2mm Allen wrench
  • Owner's Manual
  • Warranty sheet

Product Research

Features
Controls
Connections

Features

Pioneer PRS Series: The Pioneer PRS series amplifiers cleanly amplify the music signal, free of distortion or added color.

Class D Amplifier: The PRS-D1200SPL is a Class D mono amplifier, delivering huge power with low heat and distortion.

1-Ohm Stable: The amp can be connected to loads with impedances as low as 1 Ohm. The lower the impedance, the higher the power output:

  • 500 watts x 1 at 4 ohms
  • 1000 watts x 1 at 2 ohms
  • 1200 watts x 1 at 1 ohms.

Externally Bridgeable: This mono amplifier can be externally bridged--joining two amplifiers together as one--doubling the power to a single woofer or voice coil.

Multi-Amplifier Synchronization System (MASS): Pioneer's proprietary Multi-Amplifier Synchronization System technology allows one amplifier (master) to control the settings of other amplifiers when two or more amps are "strapped" together. This eliminates the need to adjust each amplifier gain separately.

Dynamic Amplifier Protection (DAP): Dynamic Amplifier Protection is a specialized circuitry which protects the amplifier from failing by automatically reconfiguring itself based on output signal level. Two top-mounted indicators will light when the amplifier's temperature rises beyond a certain level, or if some other type of problem has occurred in the amplifier.

Controls

Controls: The amplifier is equipped with the following controls and switches:

  • Mode Select: a 3-way switch to set the amplifier's sync mode (Master, Sync, Sync Inv). A "stopper" must be removed before switching from "Master" setting.
  • Gain: a rotary control (6.5V to 0.4V) to set the input sensitivity of the amp
  • Low Pass Filter:The PRS-D1200SPL has a 40-240 Hz, continuously variable low pass filter to optimize your system's efficiency and delivers the best possible sound quality. This low pass filter has a slope of 24dB/octave.
  • Subsonic: The amp has a 20Hz subsonic filter to remove power-robbing frequencies below the tuning of your subwoofer or enclosure. The subsonic filter has a slope of 24dB/octave.
  • Bass Boost: The amplifier features a selectable bass boost control with a wired bass remote. The bass boost frequency is variable between 20 Hz and 120 Hz, adjustable on the amplifier. Once you set the frequency, you can select amount of bass boost right from the driver's seat using the wired bass remote. The level is selectable at 0dB (flat), 6dB, 12dB, or 18dB.
  • BFC Switch: Beat Frequency Control switch--if you hear a beat while listening to an AM radio broadcast, change the position of the switch with a small flat screwdriver. (This unmarked switch is located beside the power terminals).

Connections

Hidden Connections: For a clean installation, the amp's connections are located on the ends of the amplifier under removable terminal covers. The connections include:

  • Left Side of Amp:
    • Fuses: four 40A ATO fuses
    • Power: set screw terminal capable of accepting up to 4 gauge wire
    • System Control: set screw terminal capable of accepting up to 10 gauge wire
    • Ground: set screw terminal capable of accepting up to 4 gauge wire
  • Right Side of Amp:
    • Sync Input/Output: stereo RCA jacks for use when "strapping" two or more amps together
    • Input: stereo RCA jacks for line-level input signal
    • Bass Boost: RJ14 jack for use with the supplied wired Bass Boost remote
    • Speaker Output: set screw terminals capable of accepting up to 4 gauge wire

Wiring Recommendation: It is recommended that the amplifier should be protected with a 200-amp fuse at the battery. The 4-gauge amplifier wiring kits sold by Crutchfield all have a 100-amp fuse included, with either an AFS or Maxi-style fuse holder. If a 200-amp Maxi or AFS fuse cannot be found, an ANL-style fuse holder (211FHXL4) and 200-amp ANL fuse (211FANL200) should be used.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Pioneer Stage 4 PRS-D1200SPL Reviews

Average Customer Review:

3 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great product

Written By Lonnie, Westport, Ma on Friday, December 26, 2014

Looks like it's put together very well, great instructions

Pros: High quality, great instructions

Cons: None

WOW...

Written By Clint, Texas on Thursday, January 23, 2014

Crutchfield Customer Review (What's this?)

WOW, this amp ROCKS. I have it pushing two 13 1/2 inch JBL subs in my Tundra.

Pros: This pumps my jbl subs like no other, I am afraid to turn it up too much at the moment, scared it will blow the subs, lol

Cons: nothing

Curiously Strong

Written By JohnD, Milwaukee, WI on Sunday, September 26, 2010

This amplifier preforms great. Driving 3 JL 10W1V2s with power to spare. Power is clean and without distortion. No complaints at all.

Get everything you’ll need to enjoy your new Pioneer Stage 4 PRS-D1200SPL

Bring the music from your amp to your speakers.
Patch cables take the music from your stereo to the amplifier. Most amp wiring kits don't include them.
For multi-amp systems, you'll need a separate fuse holder.
Helps protect your car's charging system and improves power handling. Required power and ground wires not included with cap.
The right tools will make the installation easier.
Have your new amplifier put in by a qualified professional in your area.
T-Spec V10-RAK4

T-Spec V10-RAK4

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 120V10RAK4

(1)

$99.99
Add to Cart
Kicker CK4

Kicker CK4

Complete 4-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire

Item #: 206CK4

(1)

$149.99
Add to Cart
Rockford Fosgate RFK4X

Rockford Fosgate RFK4X

Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire

Item #: 575RFK4X

(12)

$159.99
Add to Cart
EFX PA4BX Wiring Kit

EFX PA4BX Wiring Kit

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 142PA4BX

(6)

$79.99
Add to Cart
T-Spec 0PK Installation Kit

T-Spec 0PK Installation Kit

1/0-gauge amplifier wiring kit — includes speaker wire

Item #: 1200PK

(1)

$189.99
Add to Cart
Rockford Fosgate RFK4

Rockford Fosgate RFK4

4-gauge amplifier power wiring kit

Item #: 575RFK4

(10)

$114.99
Add to Cart
Kicker PK4

Kicker PK4

4-gauge amplifier power wiring kit

Item #: 206PK4

(1)

$129.99
Add to Cart
Lightning Audio LA-4i

Lightning Audio LA-4i

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 495LA4I

(10)

$69.99
Add to Cart
Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (14 Gauge)

Item #: 541SPW514B

(53)

$0.65
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

T-Spec 2-Channel RCA Patch Cables

T-Spec 2-Channel RCA Patch Cables

Available in 7 different lengths (20-foot)

Item #: 120RCA202

(28)

$20.99
Add to Cart
EFX 17-foot RCA Patch Cable

EFX 17-foot RCA Patch Cable

Item #: 142A17C

(55)

$7.99
After $2.00 Savings Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Reference Series Multi-Core RCA patch cables — available in 5 different lengths (12-foot)

Item #: 142RR12

$19.95
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Core Series Twisted RCA patch cables — available in 5 different lengths (12-foot)

Item #: 142RCT12B

$9.95
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Elite Series Braided Multi-Core RCA patch cables — available in 5 different lengths (25-foot)

Item #: 142RE25

$99.95
Add to Cart
T-SPEC V6-MANL Fuse Holder

T-SPEC V6-MANL Fuse Holder

4- to 8-gauge mini-ANL fuse holder

Item #: 120MANL

(4)

T-Spec Capacitor

T-Spec Capacitor

1.5-farad capacitor with red LCD meter

Item #: 12015DDC

(11)

$79.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(17)

$19.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

Pro.Fit Hook Tool Set

Pro.Fit Hook Tool Set

Installation tools — pair

Item #: 042DM3022

(9)

Pro.Fit Trim Panel Tool

Pro.Fit Trim Panel Tool

Remove your vehicle's trim panels without damage

Item #: 042DM4022

(88)

Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(34)

$12.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(54)

$24.99
Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Install Bay IB35400

Install Bay IB35400

Premium door panel and trim tool

Item #: 12035400

$15.99
Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

$39.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(4)

$29.99
Add to Cart
InstallCard: Amp or Equalizer

InstallCard: Amp or Equalizer

Prepaid professional amplifier or EQ installation

Item #: 597421003

(18)

$79.99
Add to Cart

Questions & Answers Ask the community. Share your knowledge.