Features
Changer Controls
Note

Features

MOSFET50 Internal Amplifier: This receiver is equipped with a 50 watts x 4 (peak) MOSFET amplifier for low distortion, high power output.

Satellite Radio Tuner Compatible: This unit can control an optional Pioneer XM or SIRIUS tuner (sold separately).

Easy EQ Curves: This model has "SUPER BASS", "POWERFUL", "NATURAL", "VOCAL", "CUSTOM", and "FLAT" preset EQ curves. The "CUSTOM" curve is one that you create and store in memory. A separate "CUSTOM" curve can be created and stored in memory for each source.

3-Band Parametric Equalizer: This unit includes a 3-band parametric EQ with Selectable Q Factor. You may select a low (40, 80, 100 or 160 Hz), mid (200, 500, 1k or 2 kHz) and high frequency (3k, 8k, 10k or 12 kHz) to boost or cut within a range of -6 dB to +6 dB. The Q factor (slope of the boost or cut) may be selected from one of the following four options: 2N (narrow), 1N, 1W and 2W (wide). Selecting a narrow (steep) Q factor results in frequencies around the center frequency to be affected less by the boost or cut than they are with a wide Q factor. This feature is useful for taming frequency response problems caused by the dimensions, materials and speaker locations of a vehicle.

F.I.E. (Front Image Enhancer): This feature enhances the front image by cutting mid- and high-range frequencies to the rear speakers, limiting their output to low-range frequencies. You may select a cutoff frequency of 100, 160 or 250 Hz.

Loudness Settings: Loudness compensates for deficiencies in the low and high frequencies at low volumes. You can select from three loudness contours:

• Low: +3.5 dB boost at 100 Hz and a +3 dB boost at 10 kHz
• Mid: +10 dB boost at 100 Hz and a +6.5 dB boost at 10 kHz
• High: +11 dB boost at 100 Hz and a +11 dB boost at 10 kHz

Source Level Adjustment (SLA): This function lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Settings are based on the volume level of the FM tuner, which remains unchanged. Each source can be independently adjusted from -4 dB to +4 dB.

Supertuner IIID AM/FM Tuner: The Supertuner IIID features Feed Forward Control, which avoids multi-path interference. This pre-detection of interference enables quick filter control and results in less distortion. In addition, the Supertuner IIID creates enhanced stereo during multi-path interference, unlike conventional tuners that collapse to mono. Digital processing reduces distortion, and improves Signal-to-Noise Ratio and stereo separation. Advanced analog technology improves signal processing sensitivity.

MP3/WMA Playback: This unit can play MP3/WMA files recorded on CD-ROM, CD-R, and CD-RW discs in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. MP3 files with a bit rate from 8-320 kbps, WMA files with a constant bit rate from 48-320 kbps, and WMA files with a variable bit rate from 48-384 kbps are supported.

Compression and BMX Functions: Using the "COMP" (compression) and "BMX" functions, you can adjust the playback quality of the CD player. Each function may be set to one of two levels or off. The "COMP" function compresses the audio signal to eliminate distortion caused by the imbalances between the loudest and softest sounds when played at high volumes. The "BMX" function controls sound reverberations to give playback a fuller sound.

CD-R/CD-RW Skip Function: Some CD-R/W recorders allow you to assign skip ID tags to tracks that you never want to hear. When a track has been assigned a track skip ID, compatible units will recognize the skip ID information and skip over that track. This player recognizes track skip IDs, so CD-R and CD-RW discs with skip ID information will be played back as intended.

Disc Title Memory: Titles of up to 8 characters each can be entered into memory for up to 48 discs. When a compatible changer is connected, titles of up to 8 characters each can be entered into memory for up to 100 discs in the changer.

Optional Aux Input: When used with item 130CDRB10 (sold separately) or item 130CDRB20 (sold separately), this unit can accept input from an auxiliary source, such as a portable CD or MD player. When item 130CDRB10 is used, a CD changer cannot be connected to this unit. Item 130CDRB20 allows you to connect an optional Pioneer CD changer and an auxiliary source to this unit.

Changer Controls

ITS (Instant Track Selection) Programming: The ITS function can be used to program automatic playback of up to 99 tracks per disc for up to 100 discs. With changers sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.

Disc Title Memory: Titles of up to 8 characters each can be entered into memory for up to 100 discs.

Disc Title List: This feature allows you to display disc titles that you have entered. From the list, you can select a disc for playback.

CD Text Display: When used with a CD Text compatible Pioneer CD changer, this unit will display the titles of CD Text encoded discs that are played in the changer. When playing a CD Text disc on a CD Text compatible changer, you cannot switch to the Disc Title Input mode. CD Text disc titles, artist names and track titles longer than 8 characters may be scrolled to reveal the entire string of text.

CD Sound Quality Adjustment: Using the "COMP" (compression) and "DBE" (dynamic bass emphasis) functions, you can adjust the playback quality of the changer. Each function may be set to one of two levels or off. The "COMP" function compresses the audio signal to eliminate distortions caused by the imbalances between the loudest and softest sounds when played at high volumes. The "DBE" function boosts bass frequencies to give your music a more full sound.

Note

Display Illumination/Clock Display: When the Clock Display has been turned on, pressing and holding the source button turns off audio output, but the clock display and face/button illumination remain on. When the Clock Display has not been turned on, pressing and holding the source button turns the unit off completely. This unit's illumination and clock are "keyed" only when the Clock Display has been turned on.