Chat
Contact us
Close contact box
Connect ID #
786 365 797 4
Connect ID #
786 365 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Pioneer UD-SW250T Single truck-style sealed enclosure for 10" shallow sub

Item # 130DSW250T

Pioneer's compact UD-SW250T subwoofer enclosure will give you great bass in a limited space.

Pioneer's compact UD-SW250T subwoofer enclosure will give you great bass in a limited space.

10 questions - 12 answers

Item # 130DSW250T

About the Pioneer UD-SW250T

Bob Bihlmayer

Space for bass: the final frontier

Pioneer's compact UD-SW250T subwoofer enclosure will give you great bass in a limited space. At only 4-3/4" deep, it'll fit behind the seats of most pickup trucks or into some dimensionally challenged places in other vehicles. Built with 5/8" MDF and covered in black carpet, the enclosure offers an internal volume of 0.35 cubic feet, and its sealed design delivers punchy, accurate bass. Pioneer recommends installing the TS-A2500LS4 10" shallow subwoofer (sold separately) in this enclosure.

Space for bass: the final frontier

Pioneer's compact UD-SW250T subwoofer enclosure will give you great bass in a limited space. At only 4-3/4" deep, it'll fit behind the seats of most pickup trucks or into some dimensionally challenged places in other vehicles. Built with 5/8" MDF and covered in black carpet, the enclosure offers an internal volume of 0.35 cubic feet, and its sealed design delivers punchy, accurate bass. Pioneer recommends installing the TS-A2500LS4 10" shallow subwoofer (sold separately) in this enclosure.

READ LESS

Product highlights:

  • sealed truck-style enclosure for one 10" shallow subwoofer
  • 5/8" MDF (medium-density fiberboard) with black carpet covering
  • internal volume: 0.35 cubic feet
  • dimensions: 24"W x 12"H x 4-3/4"D1 x 3-3/8"D2
  • warranty: 1 year
  • MFR # UD-SW250T

What's in the box:

  • One truck-style enclosure for a single shallow mount 10" subwoofer
  • Installation instructions (multiple languages)
  • 2 Mounting brackets
  • Eight 1" Wood screws

Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

See the difference between "Open Box" and "Scratch & Dent" Outlet items

Customer reviews for Pioneer UD-SW250T

Loading reviews...

Average review:

4.5 out of 5 stars
10 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Pioneer UD-SW250T

Pat M.

Product Research

Features

Compatibility: This enclosure is designed for a single Pioneer 10" shallow-mount component subwoofer, TS-SW2502S4 (item number 130TSS2502, sold separately).

Materials: The box is constructed of 5/8" MDF (medium density fiberboard). MDF resists flexing and has anti-resonant qualities.

Design: Complementing the shallow subwoofer, this enclosure provides the smallest sealed box volume recommended for the TS-SW2502S4. The UD-SW250D enclosure will fit under the seat of some vehicles. The exterior is covered with black auto carpet.

Terminals: The spring post wire terminals, located on the side of the enclosure, will accept bare wire (up to 10 gauge), pin connectors, banana plugs, and dual banana plugs. Inside the enclosure, a 15" length of speaker wire is attached to the terminal (bare wire at the other end).

Loading accessories...

Customer Q&A

10 questions already asked

Q
2008 Ford F250 Crew Cab, will this fit behind the seat, without modification?
paul  Nov 03, 2019
1 answer
A
We don't have the available space behind the seats measured in that F250. The Pioneer enclosure dimensions are 24"W x 12"H x 4-3/4"D1 x 3-3/8"D2.
casey  Nov 12, 2019 (Staff)
Q
I have a 2016 Toyota Tundra with a factory sub behind the rear bench seat. Will this box fit same space? Also will this box fit a 10" JL Audio W1v3?
nathan  Oct 24, 2019
1 answer
A
Hi Nate, thank you for your question. You shouldn't have any problem with using this box in the place of the stock subwoofer enclosure in your truck. If you're driving the 2016 Crewmax w/ JBL, the available area for mounting a sub-box behind the rear seats of this vehicle is: Width (side to side) = 53", Height = 11", Depth (front to rear) = 7" at bottom, 4" at top. This box fits within those guidelines. However, you would need to go with a more shallow-fit subwoofer. The JL Audio W1v3 will not be a good match for that. Please chat with an Advisor online or by phone at 1-800-324-9695. They will be happy to go over some sub options with you!
jessica  Oct 31, 2019 (Staff)
Q
Does the Pionner TS-Z10LS2 fit in this box? It's on the small side for the recommended enclosure and the depth measurement looks close.
david dawson  Feb 10, 2019
1 answer
A
Sorry, no. The TS-Z10LS2 is slightly too deep for this enclosure. It is a recommended fit in Pioneer's UD-SW250D enclosure though: www.crutchfield.com/p_130DSW250D/item.html
ryan  Feb 15, 2019 (Staff)
Q
Can this box be retrofitted to include a port?
jeff  Jan 14, 2018
1 answer
A
Although I canceled this order and never received the box, I am sure you can create a chanel for a port in it. Probably would sound better building a custom box if you want it ported but that's up to you and your skill level.
jonathan  Jan 14, 2018
Q
Will a JL audio TW1-2 fit in this box?
stephen  Feb 22, 2017
2 answers
A
No. The Pioneer enclosure has a maximum mounting depth of 3.11" and the JL audio 10TW1 requires 4.36"
ryan  Mar 09, 2017 (Staff)
A
Not quite. My friend and I cut an exact hole in a piece of wood that was about an inch and a half thick and put that over the box, then screwed the sub into both pieces so that it was still sealed.
jack  Mar 01, 2017
Q
I know the box will fit a 10in sub but how deep isea the area where the sub is mounted. Meaning how deep of a shallow mount will fit?
sphillips  Jan 22, 2017
1 answer
A
Thanks for your question. The maximum mounting depth for your sub would be 3-1/8". Hope this helps.
kenneth  Jan 26, 2017 (Staff)
Q
will this fit behind a bench seat of a 1993 chevy s10 single cab?
seth  Jun 28, 2016
2 answers
A
Probably
tonatiuh  Jun 29, 2016
A
I think so, not 100% sure but more like a 80%
tonatiuh  Jun 29, 2016
Q
Does a Pioneer ib flat fit in the subwoofer box?
tanner wayne  Mar 11, 2015
1 answer
A
Yes!! That's exactly what I have.
tonatiuh  Mar 12, 2015
SHOW MORESHOW LESS

Loading articles...

Compare the sound