Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Looking to upgrade your system's sound? Whether you're ramping up your aftermarket receiver or adding much-needed power to a factory radio, you can count on Pioneer's GM Series amps to deliver what you're looking for — clean power. Power that'll bump up the bass, sharpen the highs, and make your listening experience something you'll look forward to every time you turn the key.
The GM-3500T 2-channel amplifier is well-suited to drive a pair of front or rear speakers, with 60 watts RMS per channel. You can also bridge the output of this versatile amp to punch out 185 watts at 4 ohms, and you'll find a low-pass filter that adapts the amp to driving a sub. Speaker-level inputs allow you to add the GM-3500T to a factory radio.
- 2-channel car amplifier
- 60 watts RMS x 2 at 4 ohms (85 watts RMS x 2 at 2 ohms)
- 185 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
- CEA-2006 compliant
- selectable low-pass filter (80 Hz, 12 dB per octave)
- MOSFET power supply
- speaker-level inputs
- preamp inputs
- fuse rating: 25A x 1
- 8-gauge power and ground leads recommended wiring and hardware not included with amplifier
- 11-3/8"W x 2-1/2"H x 8-5/8"D
- warranty: 1 year
- Our 60-day money-back guarantee
My system has plenty of power. Who needs an amp?
You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.
Pioneer GM-3500T Reviews
What's in the box?
- 2-Channel amplifier
- 25A ATO fuse (installed)
- 4" Speaker-level input harness
- Four 5/8" Self-tapping screws
- Owner's Manual (English/ French/ Spanish)
- Warranty information
Features and Specs
|RMS Power Output (Watts x Channels)||
60 x 2
|Peak Power Output (Watts x Channels)||200 x 2|
|Power at 2 Ohms (Watts x Channels)||85 x 2|
|Bridged Power (Watts x Channels)||185 x 1|
|Minimum Impedance Bridged||4|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||10-70k Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||80 dB|
|Low-Pass Crossover Frequency||80 Hz|
|Low-Pass Slope (dB/octave)||12 dB/oct|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||N/A|
|Bass Boost Frequency||N/A|
|Speaker Level Inputs||Harness|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers, this voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a 14.4 volt DC power supply and the RMS power output is measured with 1% or less Total Harmonic Distortion plus noise (THD+N) over a frequency range of 20 Hz to 20,000 Hz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4-ohms. The CEA-2006 criteria allow consumers to make an apples-to-apples comparison of car amplifiers and receivers, even from different brands. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging. CEA2006 Specifications:
- Power: 60 watts x 2 into 4-ohms
- S/N: 80 dBA (@ 1 watt into 4-ohms)
Gain Control: To accommodate the varying range of signal levels coming from today's factory and aftermarket radios, the input gain is adjustable (200mV-6.5V line level, 800mV-26V speaker level).
Gain Control Caution: If the gain control level is set too high, Pioneer's Gain Control Caution feature will automatically reduce the amplifier's output until the headunit volume is decreased to acceptable levels. This added layer of protection helps prevent damage to the amplifier and the connected speakers due to improper gain control adjustments.
LPF: A two position switch turns the low pass filter (LPF) on/off, the crossover point is fixed at 80 Hz and the slope is 12dB/octave.
Power Connections: The power and ground connections are 0.545" wide screw terminals, the remote turn-on screw terminal is 0.325" wide. A Phillips-head or flat blade screw driver (not included) is required to tighten/loosen the terminals. Spade connectors are recommended for the power, ground, and remote wires.
Speaker Connections: The speaker screw terminals are 0.325" wide. A Phillips-head or flat blade screw driver (not included) is required to tighten/loosen the terminals. Spade connectors are recommended for the speaker wires.
RCA Input: The amplifier features a pair of stereo RCA line level inputs (left/right).
Speaker Input: The GM-3500T's speaker level input and harness allows you to connect your OEM radio (or aftermarket radio that does not have the typical RCA-type outputs) without having to buy an adapter.
Fuse: The amp is protected by a single 25-amp ATO blade fuse.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.