Shallow Mount Woofer: Pioneer's Shallow-Mount subwoofers are
designed to provide wider installation options for a broad range of vehicles. They
can be mounted behind or under the seats of many vehicles. The TS-SW841D has
interlaced Carbon/Glass fiber reinforced IMPP (Injection Molded Polypropylene)
composite cones. This cone design is lightweight and rigid, resulting in clean,
powerful bass response.
Air Suspension System: Rather than using a standard spider to
control cone movement, Pioneer created an Air Suspension system; using two cones
with a sealed air space between them. The air locked between the main and drive
cones creates a spring-like effect between them moving in unison. The dual cone
structure maintains better linearity, resulting in consistently clear, powerful,
wide ranging bass response. The drive cone also deflects air pressure inside the
enclosure, which further contributes to the bass output of the small package.
Cast Aluminum Basket: The one-piece cast aluminum basket assembly
holds the motor assembly, cone, and magnet structure securely in place. The benefits
of this design include reduced internal stress, superior damping, and increased
Surround: The two cones use three-layer, fiber-woven, M-shaped
radial surrounds to attach to the basket and form the Air Suspension System. This
design keeps the voice coil centered, even under high power, for clear and powerful
Terminals: The spring compression binding post terminals will
accept a pin connector, a single banana plug, or bare wire up to 10 gauge.
Sealed Box Volume: The sealed box sizes recommended by Pioneer
range from 0.15 ft³ to 0.5 ft³; within this range the ideal size is 0.4 ft³.
Vented Box Volume: The vented box sizes recommended by Pioneer
range from 0.25ft³ to 0.5 ft³; within this range the ideal size is 0.4 ft³. The
ideal port size for a 0.4 ft³ enclosure is 2.5" diameter x 6" long.
Single Reflex Bandpass Volume: The bandpass box sizes recommended
by Pioneer range from 0.25 ft³ per chamber to 0.4 ft³ per chamber; within this range
the ideal size is 0.35 ft³ per chamber. One 3" diameter x 6" long port
should be used in an enclosure with 0.35 ft³ chambers.
Infinite-Baffle Operation: The woofer is also optimized for
infinite-baffle operation so that it can be installed in a variety of locations,
without the need for a dedicated enclosure.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.