About the Pioneer TS-A1306C
Serious impact
Serious impact
Pioneer's pumped-up TS-A Series TS-A1306C 5-1/4" component speaker system gives you a refreshing sonic upgrade.You'll hear a big improvement in sound quality over your factory speakers, especially if you power this system with an outboard amp. These Pioneers handle up to 50 watts RMS, so you'll really be able to crank your jams.
Listen with authority
This component set delivers a satisfying punch, thanks to enhanced woofer cones made of reinforced mica for exceptional rigidity and responsiveness. Install the separate 3/4" tweeters in a good spot up high in your vehicle for better stereo imaging. Pioneer smartly houses the soft dome tweeters in wave guide enclosures that help your highs achieve the widest dispersion possible, and the system also includes 2-way outboard crossovers — a step up from the inline high-pass filters usually found in component systems in this price range.
Product highlights:
- component speaker system includes component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
- 5-1/4" multilayer mica-matrix woofer cone with elastic polymer surround
- 3/4" soft-dome tweeter
- power range: 5-50 watts RMS (300 watts peak power)
- frequency response: 42-42,000 Hz
- sensitivity: 90 dB
- woofer top-mount depth: 2-1/8"
- woofer grilles and tweeter mounting equipment included
- warranty: 1 year
- MFR # TS-A1306C
What's in the box:
Pioneer TS-A1306C owner's manual
- Two woofers
- Two tweeters (with attached 10" speaker leads terminated with quick-connects)
- 2 Crossovers
- 2 Woofer grilles
- 2 Angled surface mount tweeter housings
- 2 Flush mount tweeter housings
- Two 1/2" Self-tapping screws
- Eight 3/4" Self-tapping screws
- 8 Speed clips
- 2 Circular adhesive backed foam pads
- Warranty information
- Template and specifications on box
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Featured video:
Customer reviews for Pioneer TS-A1306C
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer TS-A1306C
Features & specs
General | ||
---|---|---|
Speaker Size | 5 1/4 | |
Design | 2-way | |
Tweeter Design | 3/4" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | --- | |
Woofer Composition | Multilayer mica-matrix | |
Woofer Surround | Elastic polymer | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 42 - 42k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 300 | |
Top-mount Depth (Inches) | 2 1/8 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 4 9/16 | |
Mounting Height (Inches) | 0.21 | |
Frame Width | 5.09 | |
Frame Length | 5.09 |
Product Research
Features
Woofers: The multilayer mica-matrix woofer cone was developed to provide an extra light, yet rigid diaphragm to reproduce full, rich sound.
Surrounds: For durability and a smooth response, each woofer uses an elastic polymer (synthetic rubber) surround.
Tweeters: The TS-A1306C system features 3/4" soft-dome tweeters with magnetic fluid and Neodymium magnets for efficient, crisp, clear highs.
Tweeter Mounting: The tweeters can be flush mounted or surface mounted using the supplied housings. The surface mount housing positions the tweeters at approximately a 50° angle. Once installed the tweeters do not swivel.
Tweeter Mounting Dimensions:
Angled Surface Mount | Flush Mount | |
---|---|---|
Mounting Height | 1.625" | 0.025" |
Mounting Depth | screw depth | 0.75" |
Frame Diameter | N/A | 1.9" |
Frame Depth | 1.82" | N/A |
Frame Width | 1.61" | N/A |
Cutout Diameter | N/A | 1.57" |
Crossovers: The passive high pass crossovers have a slope of 12 dB/octave and a crossover point of 8.3 kHz. (The woofer is wired to the input side of the crossover, and the filter is applied only to the tweeter.) The attached input wires are 11" long. The attached 36" tweeter output wires are terminated with quick-slides. The crossover dimensions are:
- Width: 1.445"
- Height: 0.93"
- Length: 2.585"
The Pioneer TS-A1306C replaces these items
Pioneer TS-A1305C
- multilayer mica-matrix woofer
- 3/4" polyester fiber soft-dome tweeter
- 5-50 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
8 questions already asked
Loading...
Loading articles...
Chose these to replace existing Alpine speakers same size. These have a much higher Max input. Sound great and the crossovers were small enough to tuck nicely in the one available safe place in the door.
Scott H from Rogers, AR