Chat
Contact us
Close contact box
Connect ID #
013 538 797 4
Connect ID #
013 538 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Pioneer TS-A1606C 6-1/2" component speaker system — also fits 6-3/4" openings

Item # 130TA1606C

Pioneer's pumped-up TS-A Series TS-A1606C 6-1/2" component speaker system gives you a refreshing sonic...

Find what Fits your vehicle

Remove

Checking fit...

Pioneer's pumped-up TS-A Series TS-A1606C 6-1/2" component speaker system gives you a refreshing sonic...

10 questions - 13 answers

Item # 130TA1606C

About the Pioneer TS-A1606C

Alexander H.

Serious impact

Pioneer's pumped-up TS-A Series TS-A1606C 6-1/2" component speaker system gives you a refreshing sonic upgrade.You'll hear a big improvement in sound quality over your factory speakers, especially if you power this system with an outboard amp. These Pioneers handle up to 60 watts RMS, so you'll really be able to crank your jams.

Serious impact

Pioneer's pumped-up TS-A Series TS-A1606C 6-1/2" component speaker system gives you a refreshing sonic upgrade.You'll hear a big improvement in sound quality over your factory speakers, especially if you power this system with an outboard amp. These Pioneers handle up to 60 watts RMS, so you'll really be able to crank your jams.

Listen with authority

This component set delivers a satisfying punch, thanks to enhanced woofer cones made of reinforced mica for exceptional rigidity and responsiveness. Install the separate 3/4" tweeters in a good spot up high in your vehicle for better stereo imaging. Pioneer smartly houses the soft dome tweeters in wave guide enclosures that help your highs achieve the widest dispersion possible, and the system also includes 2-way outboard crossovers — a step up from the inline high-pass filters usually found in component systems in this price range.

READ LESS

Product highlights:

  • component speaker system includes component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 6-1/2" multilayer mica-matrix woofer cone with elastic polymer surround
  • 3/4" soft-dome tweeter
  • power range: 5-60 watts RMS (350 watts peak power)
  • frequency response: 32-43,000 Hz
  • sensitivity: 91 dB
  • woofer top-mount depth: 2-3/16"
  • woofer grilles and tweeter mounting equipment included
  • warranty: 1 year
  • MFR # TS-A1606C

What's in the box:

  • Two woofers
  • Two tweeters (with attached 10" speaker leads terminated with quick-connects)
  • 2 Crossovers
  • 2 Woofer grilles
  • 2 Angled surface mount tweeter housings
  • 2 Flush mount tweeter housings
  • Two 1/2" Self-tapping screws
  • Eight 1" Self-tapping screws
  • 8 Speed clips
  • 2 Circular adhesive backed foam pads
  • Warranty information
  • Template and specifications on box

See the difference between "Open Box" and "Scratch & Dent" Outlet items

Customer reviews for Pioneer TS-A1606C

Loading reviews...

Average review:

4.0 out of 5 stars
12 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Pioneer TS-A1606C

Pat M.

Features & specs

General
Speaker Size 6 1/2, 6 3/4
Design 2-way
Tweeter Design 3/4" Dome
Impedance (Ohms) 4
Tweeter Composition ---
Woofer Composition Multilayer mica-matrix
Woofer Surround Elastic polymer
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 91
Sensitivity at 2.83 volts N/A
Frequency Response 32 - 43k Hz
Minimum RMS Wattage ---
Maximum RMS Wattage 60
Peak Power Handling (Watts) 350
Top-mount Depth (Inches) 2 3/16
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 4 15/16
Mounting Height (Inches) 0.478
Frame Width 6.238
Frame Length 6.238
The Pioneer TS-A1606C replaces these items:

Product Research

Features

Woofers: The multilayer mica-matrix woofer cone was developed to provide an extra light, yet rigid diaphragm to reproduce full, rich sound.

Surrounds: For durability and a smooth response, each woofer uses an elastic polymer (synthetic rubber) surround.

Size Classification Note: These speakers are marketed as both 6-1/2" and 6-3/4"; the woofers will fit standard 6-1/2 speaker openings, but do not use the industry standard bolt pattern (then again, neither do many car manufacturers at this point). Without using an adapter bracket or drilling new screw holes, the speakers fit many standard 6-3/4 applications, thus we describe them as 6-3/4. Please enter your vehicle information to confirm fit.

Tweeters: The TS-A1606C system features 3/4" soft-dome tweeters with magnetic fluid and Neodymium magnets for efficient, crisp, clear highs.

Tweeter Mounting: The tweeters can be flush mounted or surface mounted using the supplied housings. The surface mount housing positions the tweeters at approximately a 50° angle. Once installed the tweeters do not swivel.

Tweeter Mounting Dimensions:

  Angled Surface Mount Flush Mount
Mounting Height 1.625" 0.025"
Mounting Depth screw depth 0.75"
Frame Diameter N/A 1.9"
Frame Depth 1.82" N/A
Frame Width 1.61" N/A
Cutout Diameter N/A 1.57"

Crossovers: The passive high pass crossovers have a slope of 12 dB/octave and a crossover point of 6.4 kHz. (The woofer is wired to the input side of the crossover, and the filter is applied only to the tweeter.) The attached input wires are 11" long. The attached 36" tweeter output wires are terminated with quick-slides. The crossover dimensions are:

  • Width: 1.445"
  • Height: 0.93"
  • Length: 2.585"

Loading accessories...

Customer Q&A

10 questions already asked

Q
Can you give me a comparison chart filled in the like one below between TS-A1606C 6.5" Component TS-A1686R 6.5" A-Series 6.5" 350-Watt 4-Way? Punch Clarity Volume Bass Scale: Best, Still Great, Not So Good, Not Good Example: TS-A1606C TS-A1686R Punch Best Still Great
tanner  Jun 13, 2018
1 answer
A
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget.
kristina  Jun 15, 2018 (Staff)
Q
Do they come with hardware to mount the crossovers??
nathan  Feb 24, 2018
1 answer
A
They come with double sided tape which works great.
william  Feb 25, 2018
Q
Can I run these speakers @ 2ohms?
marc  May 10, 2017
1 answer
A
These speakers work best when used with an amplifier at 4 ohms. Running at a different impedance could cause damage to the speaker or receiver/amp.
kyle  May 13, 2017
Q
do you need an additional amp for this?
araka  Feb 11, 2017
3 answers
A
You don't need a extra amp to power these. I have two sets of these. One is in a car without an amp and they sound really good, but in my truck I have a small pioneer amp, and the sound goes from really good to amazing!
eric  Feb 14, 2017
A
Not required.
tyrell  Feb 11, 2017
A
Only if you don't have factory tweeters
tyler  Feb 11, 2017
Q
When wiring these to an amp do you calculate each speaker and tweeter being 4 ohms each or is it 4 ohms for one set of woofer and tweeter?
isaac  Jan 04, 2017
1 answer
A
One woofer and tweeter together would show 4-ohms to an amplifier channel; you wouldn't need to calculate the impedance for the woofer and tweeter separately/individually. I hope that helps!
david  Jan 13, 2017 (Staff)
Q
How did the bass response of the speakers? I am looking for it to replacement of my stock speaker?
gaurav  Oct 19, 2016
1 answer
A
Component speakers are not known for their bass response but the Pioneers are rated to play down to 32Hz which is great for a speaker of this size. I hope that helps. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5
ryan  Oct 20, 2016 (Staff)
Q
Will it fit normal 6.5 inch speaker bracket? Is there any options in crossover for -3db or +3dbdb settings for tweeter?
gaurav  Oct 15, 2016
1 answer
A
This will depend largely on your vehicle. For details on fit and installation, please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and ensure fitment in your application. The included crossover network is not adjustable though. I hope that helps!
david  Oct 19, 2016 (Staff)
Q
can i replace the 1 inch tweeter in my 2015 civic si with these 3/4?
matthew  Sep 02, 2016
1 answer
A
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Sep 06, 2016 (Staff)
Q
Pioneers website says these fit a 2014 Kia Optima, how do I know for sure?
timothy  Mar 14, 2016
2 answers
A
I got them for my 2007 XTerra. Have not installed them yet.
paul  Mar 15, 2016
A
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Mar 15, 2016 (Staff)
Q
I have pioneer Avh4700bs which I believe has built in amp. What would you recommend in my 2006 f-150 super crewcab if I don't want extra amps and rewiring? I just want to take out factory speakers and replace with new to improve sound and give a little bass... What do you think Crutchfield????
diane  Jan 15, 2016
1 answer
A
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget.
kenneth  Jan 16, 2016 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound