About the Pioneer TS-D1702R
Upgrade with Pioneer
Upgrade with Pioneer
Car audio enthusiasts know that replacing your factory speakers is the first step towards better sound. Pioneer TS-D1702R 2-way speakers sport innovative technologies and materials that'll put your car's sound miles ahead of where it was.
The journey begins with the innovative 6-3/4" woofer — a high-tech composite material made from basalt and Aramid creates a rigid, lightweight cone. This design supplies solid midbass punch with exceptional midrange definition, while its rubber surround ensures smooth cone excursion. A heavy stamped metal basket supports the woofer cone and dampens vibrations and resonances that can unduly color your music's natural sound.
The oversized soft-dome tweeter radiates impressive highs, aided by a special wave guide that improves off-axis performance — meaning you'll get better stereo imaging in more locations throughout your car. A sealed rear chamber allows the tweeter to reach lower into the midrange to improve the definition of vocals and instruments. The tweeter's compact and powerful neodymium magnet provides excellent performance even when the power levels are cranked.
Priced per pair
Product highlights:
- 2-way car speakers for 6-3/4" locations (pair)
- Aramid/basalt fiber composite woofer with rubber surround
- 1-1/8" soft dome tweeter
- built-in 2-way crossover
- frequency response: 30-32,000 Hz
- recommended power range: 2-60 watts RMS
- peak power handling: 280 watts
- sensitivity: 88 dB
- top-mount depth: 2-9/16"
- warranty: 1 year
- MFR # TS-D1702R
What's in the box:
Pioneer TS-D1702R owner's manual
- 2 Two-way 6.75" speakers
- 2 Grilles
- 2 Mounting rings
- Two 14" lengths of speaker (with female quick-slides on one end and bare wire on other end)
- 8 Speed-clips
- 8 Self-tapping screws (4mm x 25mm)
- 8 Mounting screws (4mm x 10mm)
- 2 Self-adhesive foam gaskets
- Two 11" wire-ties
- Template
- Warranty sheet
Customer reviews for Pioneer TS-D1702R
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer TS-D1702R
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1.125" Soft-dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Polyester | |
Woofer Composition | IMPP/Aramid/Basalt | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 88 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 30 - 32k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 280 | |
Top-mount Depth (Inches) | 2 9/16 | |
Bottom-mount Depth (Inches) | 2 3/4 | |
Cutout Diameter or Length (inches) | 5 1/2 | |
Mounting Height (Inches) | 0.6525 | |
Frame Width | 6.155 | |
Frame Length | 6.155 |
Product Research
Features
Dual-Layer IMX Aramid/Basalt Fiber Composite Cone: The Pioneer D-Series speaker features Dual-layer IMX (Injection-molded Matrix) aramid/basalt fiber composite cone woofers. Used in the surface layer, this Aramid/Basalt Fiber material is highly rigid and better absorbent, enhancing stability and maintaining integrity throughout a wide temperature range. The woofers also have butyl rubber surrounds for a smoother response, heat resistant voice coil, and 5.3-ounce Strontium magnets.
Rear Chamber Tweeter Enclosure: The Pioneer D-Series speakers feature an exclusive rear chamber tweeter enclosure. This design extends mid-range frequency for improved vocal imaging and staging. The TS-D1702R's 1-1/8" soft dome tweeters also utilizes wave guides to control sound dispersion to make sound stage wider in the car. In addition, the tweeter uses a magnetic fluid neodymium magnet for higher efficiency.
High-Quality Passive Crossover Network: The built-in HPF (-12 dB/oct.) and LPF (-6 dB/oct.) crossover improves the transition from mid to high frequency, for a smoother mid-range to tweeter response. Audiophile-grade capacitors and inductors are used, and all components are encased in a clear acrylic cover for protection.
Grilles: The speakers come with black steel mesh grilles with silver heat-proof resin frames.
Mounting Ring: The supplied mounting ring has mounting holes for various 6-3/4" applications, allowing the speaker to fit more vehicles. In most cases, the ring should be used to mount the speaker.
The Pioneer TS-D1702R replaces these items
Pioneer Premier TS-D702P
- woven basalt layered onto IMPP woofer
- rubber surround
- soft dome tweeter
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
great replacement for the stock speakers. I am using this speakers in a 06 Chevy Express with the factory head unit. They sound great and crisp even at max volume.
ducu from New Jersey