About the Pioneer Stage 4 TS-S062PRS
Pioneer Stage 4 PRS Midrange Component Speakers
Pioneer Stage 4 PRS Midrange Component Speakers
Pioneer PRS Series component speaker systems deliver superb sound with a wide open soundstage, so you'll hear your music faithfully reproduced and in perfect balance throughout your car's interior. Pioneer designed these midrange component speakers as part of their Stage 4 System, along with the DEX-P99RS receiver, PRS Series amplifiers, PRS component speaker systems, and the TS-W252PRS subwoofer, to deliver uncompromised sound quality in your vehicle.
Two-layer cones for clear and mellow vocals
Each TS-S062PRS 2-5/8" speaker features a cone made from hard Aramid fibers and cellulose pulp that gives your music a mellow feel while still handling sharp attacks with clean fidelity. A rubber surround holds its shape even when the speaker's driven hard, so you'll enjoy impressive midrange accuracy that'll make the vocal and instrumental details sound out. An aluminum center plug improves sound dispersion and dissipates heat for a longer life.
Back chamber improves power handling and tightens the sound
Each TS-S062PRS comes with a sealed "chamber" that you can fit onto the back of the speaker to acoustically suspend the cone, which increases power-handling ability and improves the speaker's transition from your music's low notes to the midrange.
How these speakers fit in your Stage 4 system
The DEX-P99RS Stage 4 receiver boasts 4 sets of preamp outputs for highs, mids, lows, and subs, allowing you to add these TS-S062PRS midrange speakers to a PRS component system, then use PRS Series amps to drive each component separately. You'll enjoy a powerful stereo image and superb sound quality.
Pioneer's Stage 4 System
Check out all the products in Pioneer's Stage 4 System, including receiver, speakers, subs, and amps.
Priced per pair
Product highlights:
- 2-5/8" component midrange speakers (pair)
- Aramid fiber and pulp cone
- rubber surround
- 4-ohm impedance
- frequency response: 80-40,000 Hz without chamber, 100-40,000 Hz with chamber
- power range: 5-15 watts RMS (60 watts peak) without chamber, 5-50 watts RMS (200 watts peak) with chamber
- sensitivity: 85 dB
- grilles included
- depth: 1-1/4" without chamber, 1-5/8" with chamber
- warranty: 1 year
- MFR # ts-s062prs
What's in the box:
Pioneer Stage 4 TS-S062PRS owner's manual
- Two 2-5/8" midrange speakers
- 2 Mounting cups (with attached 11" speaker wire and installed polyfil)
- 2 Mounting rings
- 2 Machine screws (with lock-and flat-wahsers attached)
- 8 Self-tapping hex-head screws
- 8 Self-tapping Phillips-head screws
- Strip of self-adhesive foam
- Installation Instructions
- Limited Warranty information
Customer reviews for Pioneer Stage 4 TS-S062PRS
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer Stage 4 TS-S062PRS
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | --- | |
Impedance (Ohms) | 4 | |
Tweeter Composition | --- | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 85 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 100 - 40k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 1 11/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 2 11/16 | |
Mounting Height (Inches) | 0.6875 | |
Frame Width | 3.385 | |
Frame Length | 3.385 |
Product Research
Features
Specifications & Dimensions
Features
Overview: The Pioneer TS-S062PRS are Reference Series 2-5/8" component midrange speakers which delivers clarity to male and female vocals.
Midrange Driver: The Pioneer TS-S062PRS midrange drivers feature an Aramid fiber and pulp cone with a rubber surround.
Acoustic Chamber: The Pioneer TS-S062PRS midrange speakers come with a mounting-cup (acoustic chamber) which increases power range, but lowers bass response.
Grille: The TS-S062PRS midrange speakers are equipped with integrated (non-removable) grilles.
Installation: The TS-S062PRS midrange drivers are designed to be top-mounted with or without the included mounting cup (chamber).
Specifications & Dimensions
Specifications Chart:
Specifications | With Acoustic Chamber (mounting-cup) | Without Acoustic Chamber (mounting-cup) |
---|---|---|
Power Range | 5 to 50 watts | 2 to 15 watts |
Max Power | 200 watts | 60 watts |
Frequency Response | 100 Hz to 40 kHz (-20 dB) | 80 Hz to 40 kHz (-20 dB) |
Sensitivity | 85 dB (+/-1.5 dB) | 85 dB (+/-1.5 dB) |
Dimensions Chart:
Specifications | With Acoustic Chamber (mounting-cup) | Without Acoustic Chamber (mounting-cup) |
---|---|---|
Frame Diameter | 3.385" | 3.45" |
Cut-Out Diameter | 2.675" | 2.495" |
Mounting Depth | 1.6875" | 1.25" |
Mounting Height | 0.6875" | 0.5" |
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
Incredible craftsmanship/performance in a tiny package. And Crutchfield made the $$ bite less painful selling them for less than half retail. They can easily stand up to the two pair of Polk mids that I'm running, and are able able to place that power into the 2 1/2" space available in my dash!
Bluemalibu from California