About the Pioneer TS-T110
Hit the high notes
Hit the high notes
The light and responsive TS-T110 hard dome tweeters will give you a dramatic improvement in high frequency response and imaging. They feature a high-pass in-line crossover and can be flush- or surface-mounted.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
Priced per pair
Product highlights:
- 7/8" fluid-cooled PPTA dome tweeters (pair)
- flush- and surface-mount hardware included
- non-removable metal mesh grilles
- 7,000 Hz high-pass in-line crossovers (6dB/octave) included
- power handling: 2-40 watts RMS (120 watts peak power)
- frequency response: 2,500-30,000 Hz
- sensitivity: 90 dB
- top-mount depth: 15/16"
- warranty: 1 year
- MFR # TS-T110
What's in the box:
Pioneer TS-T110 owner's manual
- 2 Tweeters (20" length of speaker wire with in-line crossover capacitor hardwired to each tweeter)
- Flush mount cup
- Flush mount backplate
- 2 Double sided self-adhesive foam mounting pads
- 2 Threaded posts
- 2 Screws (one lock washer and one flat washer installed on each screw)
- 4 Nuts
- 2 Flat washers
- Instruction sheet
- Warranty sheet
- Specifications and cutout template on box
Customer reviews for Pioneer TS-T110
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer TS-T110
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | 7/8" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | PPTA | |
Woofer Composition | NA | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 2500 - 30k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 40 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 0 15/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 2 1/16 | |
Mounting Height (Inches) | 0.419 | |
Frame Width | 2.267 | |
Frame Length | 2.267 |
Product Research
Features
Tweeter Materials: The tweeter has a PPTA dome diaphragm, and it's fluid-cooled for high power handling. PPTA is a poly material that's among the lightest and most responsive speaker materials developed. PPTA has high inner loss characteristics, which results in effective resonance damping. This material provides performance similar to metal diaphragm materials, but without the harshness often associated with metal diaphragms. The result is detailed, dynamic sound reproduction.
Metal Grilles: Each tweeter has a non-removable metal mesh grille attached.
Two Mounting Options: The tweeters may be surface or flush mounted. The tweeters do not swivel when flush or surface mounted.
Tweeter Mounting Dimensions:
Surface Mount | Flush Mount | |
---|---|---|
Mounting Height | 0.840" | 0.419" |
Depth | 0" (with adhesive) 0.1875" (screw depth) | 0.921" |
Base/Ring Diameter | 1.88" | 2.267" |
Cutout | N/A | 2.007 |
Crossover Specification: The 7 kHz in-line high-pass crossover capacitors have a slope of 6dB/octave.
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
Wanted a small speaker to supplement the two door speakers which are located very low on the door. These are perfect! I located them just below the door cap. Installation was easy. They sound great - lifts the sound up the cockpit for a significantly better audio experience.
1977 MG from Naples, FL