About the Pioneer Stage 4 TS-W252PRS
Bass that hits hard and sounds great
Bass that hits hard and sounds great
Pioneer's Stage 4 Reference Series subwoofers add premium bass to your system — you'll hear accurate, lifelike low end that hits like a ton of bricks. Pioneer loads this bass powerhouse with a wide array of advanced features and technologies to make sure you get the most out of your music.
The right cone for the job
A stiff woofer cone is optimal for moving air to create powerful bass, but a cone that's too heavy loses control and introduces distortion into your music. Pioneer utilizes the properties of different materials to create a cone that provides reliable stiffness, yet is light enough to respond to rapid changes in your music. The cone features an Aramid fiber surface layer, a polypropylene core, and a glass fiber reinforcement layer — all three work in tandem to pump out great bass that's not dragged down by excess baggage.
Pioneer also primes their Stage 4 subs with a patented suspension system which utilizes progressive flexing to keep the cone perfectly centered during heavy play. A butyl-coated fiber surround also promotes the deep excursion that you need for strong performance.
Authoritative and accurate
The TS-W252PRS 10" subwoofer handles up to 400 watts RMS for high-impact bass. A die-cast aluminum frame adds strength and gives the sub stability over the long haul. Pioneer recommends using this sub in a sealed enclosure for accurate, powerful performance.
Pioneer's Stage 4 System
Check out all the products in Pioneer's Stage 4 System, including receiver, speakers, subs, and amps.
Priced per speaker
Product highlights:
- 10" 4-ohm subwoofer
- injection-molded polypropylene matrix cone with Aramid and glass-fiber layers
- butyl-covered fiber surround
- Progressive Flex Suspension System
- die-cast aluminum basket
- power range: 50-400 watts RMS
- peak power handling: 800 watts
- frequency response: 20-2,400 Hz
- sensitivity: 84 dB
- top-mount depth: 7"
- sealed box volume: 1.0 cubic feet
- warranty: 1 year
- MFR # ts-w252prs
What's in the box:
Pioneer Stage 4 TS-W252PRS owner's manual
- One 10" woofer
- 6 Allen head (5mm) self-tapping screws (5mm x 30mm)
- Self adhesive foam gasket
- Specification sheet
- Warranty information
Customer reviews for Pioneer Stage 4 TS-W252PRS
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer Stage 4 TS-W252PRS
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Aramid/Glass Fiber/Poly | |
Surround Material | Butyl coated Conex | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
84 dB at 1 watt | |
Frequency Response | 20 - 2400 Hz | |
Max RMS Power Handling | 400 | |
Peak Power Handling (Watts) | 800 | |
Top Mount Depth (inches) | 7 | |
Bottom Mount Depth (inches) | 7 5/8 | |
Cutout Diameter or Length (inches) | 9 5/16 | |
Frame Width | 10.857 | |
Frame Length | 10.857 | |
Vas (liters) | 30.1 | |
Fs (Hz) | 29 | |
Qts | 0.28 | |
Xmax (millimeters) | 9.1 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1 | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
IMX Cone: Pioneer's proprietary 3-Layer IMX (Injection Molded Matrix) cones are rigid yet lightweight; they consist of an aramid fiber surface layer, foamed polypropylene core, and glass fiber reinforcement layer. The surround is corrugated and rubber coated.
Cast Aluminum Basket: The cast aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design include reduced internal stress, superior damping, and increased magnetic efficiency.
Terminal: The gold plated set screw terminal accepts bare wire up to 4 gauge.
Sealed Box Volume: Pioneer recommends the woofer be mounted in a sealed enclosure of 1.0 ft³.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
While the speaker seems extremely heavy duty, the amplifier that was sold as a package with it seems to be underpowered for this speaker. That is why I didn't give all five stars. I think this speaker should've been a two ohm model.
Matthew from Parma, Ohio