Woofer: The Pioneer Champion series TS-W259D4 features a
seamless IMPP (Injection Molded Polypropylene) composite cone woofer. The
surface area is approximately 14% larger than last year's model for louder and
higher quality bass reproduction. This process of cone molding assures a
uniform cone thickness for superior linearity and clarity. The cone is lightweight and rigid
for low distortion and superior bass response.
Surround: The surround is made of dual-layer, fiber
reinforced elastic polymer.
Dual Voice Coils: For increased system flexibility, the woofer has two
4Ω voice coils. The two sets of spring compression binding post terminals are side-by-side
for easy wiring. Each post will accept a pin connector, a single banana plug, or bare wire
up to 10 gauge. The two voice coils can be wired in series to present an 8Ω load or in
parallel to present a 2Ω load. Additionally, each coil can be connected to a different
amplifier channel and each channel will see a 4Ω load.
Double-stacked Magnet: The TS-W259D4 uses Double-stacked
High Energy magnets to create a powerful magnetic force. This increases the control exerted over the voice
coil and the power transferred to the cone.
Sealed Box Volume: The sealed box sizes recommended by Pioneer
range from 0.65 ft³ to 1.25 ft³; within this range the ideal size is 0.8 ft³.
Vented Box Volume: The vented box sizes recommended by Pioneer range from 0.9 ft³ to
1.5 ft³; within this range the ideal size is 1.1 ft³. The ideal port size is 3" diameter x
long with a 1.1 ft³ enclosure.
Single Reflex Bandpass Volume: The bandpass box sizes recommended by Pioneer range
from 0.45 ft³ per chamber to 0.8 ft³ per chamber; within this range the ideal size is 0.6 ft³ per chamber.
One 3" diameter x 6.5" long port should be used in an enclosure with 0.6 ft³ chambers.
Power Handling: The woofer has two 4Ω voice coils; each coil can handle
up to 175 watts RMS (350 watts total).
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.