About the Pioneer Premier TS-W1208D2
Pioneer Premier's Champion Series subs deliver high-impact bass without thrashing your wallet. They combine top-notch materials with precise construction, so you hear dynamic low end that really stands out.
The TS-W1208D2 12" subwoofer features an injection-molded polypropylene cone, backed with basalt and Aramid fiber for durability and rigidity without packing on unnecessary weight. The sub's 3-layer surround sandwiches interwoven fiber between two layers of urethane for long excursion with exceptional accuracy. Add a solid dual-mass magnet assembly for increased control and hard-hitting propulsive power, and you've got yourself a tremendous bass value.
The dual 2-ohm voice coils allow you to set up a high-powered system with a compatible low-impedance amp. Pioneer makes it easy to reconfigure the sub's wiring to the impedance you need.
Priced per speaker
Product highlights:
- 12" subwoofer with dual 2-ohm voice coils
- IMPP cone reinforced with Aramid and basalt fibers
- 3-layer urethane and fiber-woven radial surround
- stamped steel basket
- switchable to 4-ohm or 1-ohm impedance configuration
- power range: 50-400 watts RMS (200 watts RMS per coil)
- peak power handling: 1,400 watts
- frequency response: 20-180 Hz
- sensitivity: 91 dB
- top-mount depth: 6"
- sealed box volume: 0.85-1.75 cubic feet
- ported box volume: 1.25-2.05 cubic feet
- warranty: 3 years
- MFR # TS-W1208D2
What's in the box:
Pioneer Premier TS-W1208D2 owner's manual
- One 12" Premier Champion Series woofer
- 8 Self-tapping screws (5mm x 30mm)
- Self adhesive foam gasket
- Manual (English/ Spanish/ French)
- Warranty information
Customer reviews for Pioneer Premier TS-W1208D2
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer Premier TS-W1208D2
Features & specs
Features and Specs | ||
---|---|---|
Size | 12 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Basalt/Aramid Fiber IMPP | |
Surround Material | Urethane/interwoven fiber | |
Port diameter (inches) | 3 | |
Port length (inches) | 6 | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
91 dB at 1 watt | |
Frequency Response | 20 - 180 Hz | |
Max RMS Power Handling | 400 | |
Peak Power Handling (Watts) | 1400 | |
Top Mount Depth (inches) | 6 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 10 3/4 | |
Frame Width | 12.839 | |
Frame Length | 12.839 | |
Vas (liters) | 36.16 | |
Fs (Hz) | 33.7 | |
Qts | 0.48 | |
Xmax (millimeters) | 8.7 | |
Parts Warranty | 3 Years* | |
Labor Warranty | 3 Years* | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1.25 | |
Minimum Sealed Box Volume (cubic feet) | 0.85 | |
Maximum Sealed Box Volume (cubic feet) | 1.75 | |
Ideal Ported Box Volume (cubic feet) | 1.65 | |
Minimum Ported Box Volume (cubic feet) | 1.25 | |
Maximum Ported Box Volume (cubic feet) | 2.05 |
Product Research
Features
Specifications
Warranty Note
Features
Woofer: The TS-W1208D2 is an IMPP (Injection Molded Polypropylene) composite cone woofer with interlaced Basalt and Aramid fibers. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. The cone is lightweight and rigid for low distortion and superior bass response.
3-Layer Urethane Surround: The surround uses two layers of urethane with a layer of interwoven fiber between them to add strength and stability and reduce cone distortion.
Dual Voice Coils: For increased system flexibility, the woofer has two 2Ω voice coils. The two sets of spring compression binding post terminals are side-by-side for easy wiring. Each post will accept a pin connector, a single banana plug, or bare wire up to 10 gauge. The speaker is shipped with two of the terminals shorted together and covered (wired in series) to present a 4Ω load. Remove the shorting wire and connect the terminals in parallel to present a 1Ω load. Additionally, each coil can be connected to a different amplifier channel and each channel will see a 2Ω load.
Dual Mass Magnet: The TS-W1208D2 uses a Dual Mass Magnet assembly (weighing in at 83oz.) to create a powerful magnetic force. This increases the control exerted over the voice coil and the power transferred to the cone.
Specifications
Sealed Box Volume: The sealed box sizes recommended by Pioneer range from 0.85 ft³ to 1.75 ft³; within this range the ideal size is 1.25 ft³.
Vented Box Volume: The vented box sizes recommended by Pioneer range from 1.25 ft³ to 2.05 ft³; within this range the ideal size is 1.65 ft³. The ideal port size for a 1.65 ft³ enclosure is 3" diameter x 6" long.
Single Reflex Bandpass Volume: The bandpass box sizes recommended by Pioneer range from 0.7 ft³ per chamber to 1.1 ft³ per chamber; within this range the ideal size is 0.9 ft³ per chamber. One 3" diameter x 3.5" long port should be used in an enclosure with 0.9 ft³ chambers.
Power Handling: The woofer has two 2Ω voice coils; each coil can handle up to 200 watts RMS (400 watts total).
Warranty Note
Warranty Note: The included warranty card indicates a 1 year parts and labor warranty for Premier brand loudspeakers. The warranty is extended to 3 years if the speakers are installed by a Pioneer Premier dealer. However, Pioneer has extended the warranty to 3 years for all Premier brand speakers purchased from Crutchfield, regardless of who installs them.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...