Woofer: The TS-W2502D2 has an interlaced Basalt/Carbon fiber
reinforced IMPP (Injection Molded Polypropylene) composite cone. This cone design
is lightweight and rigid, resulting in clean, powerful bass response.
Cast Aluminum Basket: The one-piece cast aluminum basket assembly
holds the motor assembly, cone, and magnet structure securely in place. The benefits
of this design include reduced internal stress, superior damping, and increased
Air Suspension System: Rather than using a standard spider to
control cone movement, Pioneer created an Air Suspension system; using two cones
with a sealed air space between them. The air locked between the main and drive
cones creates a spring-like effect between them moving in unison. The dual cone
structure maintains better linearity, resulting in consistently clear, powerful,
wide ranging bass response.
3-Layer Urethane Surround: The surround uses two layers of urethane
with a layer of interwoven fiber between them to add strength and stability and reduce
Dual Voice Coils: For increased system flexibility, the woofer
has two 2Ω voice coils. The two sets of spring compression binding post terminals
are side-by-side for easy wiring. Each post will accept a pin connector, a single
banana plug, or bare wire up to 10 gauge. The two voice coils can be wired in series
to present a 4Ω load or in parallel to present a 1Ω load. Additionally,
each coil can be connected to a different amplifier channel and each channel will
see a 2Ω load.
Dual Mass Magnet: The TS-W2502D2 uses a Dual Mass Magnet assembly
(weighing in at 88 ounces) to create a powerful magnetic force. This increases the
control exerted over the voice coil and the power transferred to the cone.
Sealed Box Volume: The sealed box sizes recommended by Pioneer
range from 0.35 ft³ to 0.7 ft³; within this range the ideal size is 0.6 ft³.
Vented Box Volume: The vented box sizes recommended by Pioneer
range from 0.6 ft³ to 1.2 ft³; within this range the ideal size is 0.9 ft³. The
ideal port size for a 0.9 ft³ enclosure is 3" diameter x 3.5" long.
Single Reflex Bandpass Volume: The bandpass box sizes recommended
by Pioneer range from 0.6 ft³ per chamber to 1.0 ft³ per chamber; within this range
the ideal size is 0.8 ft³ per chamber. One 3" diameter x 7.75" long port
should be used in an enclosure with 0.8 ft³ chambers.
Power Handling: The woofer has two 2Ω voice coils; each
coil can handle up to 400 watts RMS (800 watts total).
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.