Chat
Contact us
Close contact box
Connect ID #
155 211 897 4
Connect ID #
155 211 897 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

JL Audio CS112-WXv2 Sealed BassWedge™ enclosure with one 12" WXv2 subwoofer

Item # 136112WXV2

JL Audio built their BassWedge CS112-WXv2 enclosure to make car-rattling bass for a reasonable price, without the...

JL Audio built their BassWedge CS112-WXv2 enclosure to make car-rattling bass for a reasonable price, without the...

4 questions - 7 answers

Item # 136112WXV2

Shop all JL Audio Sub Boxes (Loaded)

About the JL Audio CS112-WXv2

John Pollard

JL quality at a great price

JL Audio built their BassWedge CS112-WXv2 enclosure to make car-rattling bass for a reasonable price, without the need for a ton of power. The enclosure's designed to match the 12" subwoofer loaded into it, so you know you'll get every ounce of performance out of this system.

JL quality at a great price

JL Audio built their BassWedge CS112-WXv2 enclosure to make car-rattling bass for a reasonable price, without the need for a ton of power. The enclosure's designed to match the 12" subwoofer loaded into it, so you know you'll get every ounce of performance out of this system.

 BassWedge CS112-WXv2 enclosure

An excellent combination

The CS112-WXv2 BassWedge contains one 12" WXv2 subwoofer that handles up to 200 watts RMS, loaded into a specially built sealed enclosure. You'll enjoy punchy, detailed bass without taking up too much room in your vehicle's trunk or cargo area.

CS112-WXv2 BassWedge

Solid MDF enclosure

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, nickel-plated push terminals, and solid internal wiring.

READ LESS

Product highlights:

  • sealed enclosure with one 12" WXv2 subwoofer
  • 5/8" medium density fiberboard construction covered with dark gray carpet
  • 4-ohm impedance
  • power handling: 75-200 watts RMS (500 watts peak power)
  • frequency response: 22-250 Hz
  • sensitivity: 87 dB
  • 19-5/8"W x 15-3/8"H x 12"D
  • warranty: 2 years
  • MFR # 93291

What's in the box:

  • Compact BassWedge sealed enclosure containing one 12" WXv2 subwoofer

Customer reviews for JL Audio CS112-WXv2

Loading reviews...

Average review:

5.0 out of 5 stars
16 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the JL Audio CS112-WXv2

Pat M.

Features & specs

General
Woofer Size (inches) 12
Speakers Per Box 1
Woofer Material Polypropylene
Enclosure Type Sealed
Color Gray
Pieces in System 1
Width (inches) 19-5/8
Height (inches) 15-3/8
Depth (inches) 12
Connector Type Spring post
Frequency Response 22-250 Hz
Power Range (Watts RMS) 200
Maximum Wattage 500
Sensitivity 87 dB
Impedance 4 ohms
Parts Warranty 2 Years
Labor Warranty 2 Years
The JL Audio CS112-WXv2 replaces these items:

Product Research

Features

Overview: The JL Audio BassWedge sealed subwoofer enclosure is designed around JL Audio's 12" WXv2 subwoofer, delivering tight, powerful bass. The MDF enclosure is covered with gray carpet and has a JL AUDIO logo embroidered across the top.

Speaker Terminal: The enclosure uses one pair of high current spring posts. The posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

WXv2 Woofer Features:

  • Dynamic Motor Analysis (DMA): DMA is a JL Audio proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the woofer's motor remains linear in motor force over a long excursion range, and maintains a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
  • Elevated Frame Cooling: The elevated frame design of the 12WXv2 delivers cool air through slots directly above the top-plate to the voice coil. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
  • Rear Gasket: The woofer has an integrated foam rear gasket which provides an optimal seal when installing into the enclosure.

Optional Grille: The optional SGRU-12 grille (item number 136SGR1231, sold separately) can be added to protect the woofer cone.

Loading accessories...

Customer Q&A

4 questions already asked

Q
Can I use the Kenwood Kay-7202 with this sub?
john  Jun 22, 2016
3 answers
A
Yes. The power rating for the sub is 4ohms running between 70 and 200 watts rms. It looks like a single channel of the Kenwood Kac-7202 is 150 watts rms at 4ohms. So just keep it on stereo mode only running through one channel and it will be perfect.
jasen  Jun 22, 2016
A
Yes
lance  Jun 22, 2016
A
Do you mean kac-7202? If so it says bridged 4 ohm 460w, so it has more than enough power. Just make sure you follow the guides here on properly setting your gain, i would use the multimeter and test tones before hooking up the sub itself so you dont blow it. Once set you should be good to go.
michael  Jun 22, 2016
Q
Can this enclosure be used in a down firing position?
kenya  Nov 19, 2015
2 answers
A
See no reason why you couldn't. There is a slight ridge on the front that shoud prevent prevent driver from bottoming.
ronald h  Nov 21, 2015
A
Yes, the edges on the front side of the box will make sure the sub does not hit the ground/floor if on flat surface
reese  Nov 20, 2015
Q
I have an old 10" eclipse chrome face in the back of my 2001 Jeep grand cherokee hooked up to an ancient 250 watt amp (given to me from my uncle so i really don't know much about it). Would you recommend getting a new amp for this sub or no?
miket  Mar 15, 2014
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kristina  Mar 16, 2014 (Staff)
Q
Will this fit either under or behind the back seat of a 2006 Sierra 1500 crew cab?
grady  Jan 07, 2014
1 answer
A
For details on fit or installation please contact an Advisor by phone or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
jeff  Jan 07, 2014 (Staff)

Loading articles...

Compare the sound