About the JL Audio 12WX-4
JL Audio's hard-hitting WX Series subs combine patented cooling and construction technologies to pump out accurate, lifelike bass with less distortion. They work great in compact enclosures, packing a one-two punch of extended cone excursion and precise response, for serious thump that makes a statement.
The 12WX-4 12" component subwoofer handles up to 200 watts RMS. It utilizes a polypropylene cone with a foam surround for powerful, reliable bass reproduction. The rear gasket provides improved sealing in your enclosure, while the heavy-duty 4-ohm voice coil resists breakdown under extreme conditions. The customizable trim ring lets you add a personalized look to your setup.
Priced per speaker
Product highlights:
- 12" 4-ohm subwoofer
- polypropylene cone with foam surround
- power range: 50-200 watts RMS
- frequency response: 22-250 Hz
- sensitivity: 87.17 dB
- top-mount depth: 5-5/16"
- sealed box volume: 1.375 cubic feet
- warranty: 1 year
- MFR # 92171
What's in the box:
JL Audio 12WX-4 owner's manual
- 12" Single voice coil 4-ohm subwoofer
- Owner's Manual
Customer reviews for JL Audio 12WX-4
Loading...
Loading reviews...
Average review:
3.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JL Audio 12WX-4
Features & specs
Features and Specs | ||
---|---|---|
Size | 12 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Foam | |
Port diameter (inches) | 4 | |
Port length (inches) | 18.75 | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
87.17 dB at 1 watt | |
Frequency Response | 22 - 250 Hz | |
Max RMS Power Handling | 200 | |
Peak Power Handling (Watts) | 500 | |
Top Mount Depth (inches) | 5 5/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 10 13/16 | |
Frame Width | 12.5625 | |
Frame Length | 12.5625 | |
Vas (liters) | 94.49 | |
Fs (Hz) | 27.43 | |
Qts | 0.562 | |
Xmax (millimeters) | 9.5 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1.375 | |
Minimum Sealed Box Volume (cubic feet) | 1.375 | |
Maximum Sealed Box Volume (cubic feet) | 1.375 | |
Ideal Ported Box Volume (cubic feet) | 1.75 | |
Minimum Ported Box Volume (cubic feet) | 1.75 | |
Maximum Ported Box Volume (cubic feet) | 1.75 |
Product Research
Features
Enclosure Compatibility
Features
WX Series: T he JL Audio WX's are designed with a long excursion, DMA-optimized motor system, supported by JL Audio's patented Elevated Frame Cooling and a highly linear suspension. This means they deliver lots of low-distortion, high-quality bass with all types of music.
Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method aimed at improving dynamic motor behavior. As a result of DMA optimization, the WX series woofer's motor remains linear in motor force over a very long range of excursion, and also maintains a highly stable fixed magnetic field in the gap over a wide power range. The result is vastly reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
Elevated Frame Cooling: The elevated frame design of the WX series subwoofer delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
Rear Gasket: The woofer has an integrated foam rear gasket which provides an optimal seal when installing into the enclosure.
Long Excursion: The 12WX subwoofer has 9.5mm of linear excursion, giving you louder bass with less distortion.
Enclosure Compatibility
Recommended Sealed Box Volume: The sealed box size recommended by JL Audio is 1.375 cu/ft. A diagram is provided in the owner's manual for a sealed box with external dimensions of 16" W x 19" H x 11.75" D, assuming 3/4" thick material. (If you are using 5/8" thick materials, you should subtract 1/4" from each dimension.)
Recommended Ported Box Volume: The ported box size recommended by JL Audio is 1.75 cu/ft. A diagram is provided in the owner's manual for a sealed box with external dimensions of 18.5" W x 14.75" H x 16.5" D, assuming 3/4" thick material. (If you are using 5/8" thick materials, you should subtract 1/4" from each dimension.) A round port is recommended with the following dimensions: Diameter = 4.0", Length = 18.75" (requires a 90° elbow to fit enclosure). The box should be tuned to 30 Hz.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...