Chat
Contact us
Close contact box
Connect ID #
154 452 897 4
Connect ID #
154 452 897 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

JL Audio CS210-WXv2 Sealed BassWedge™ enclosure with two 10" WXv2 subwoofers

Item # 136210WXV2

JL Audio built their BassWedge CS210-WXv2 enclosure to make car-rattling bass for a reasonable price, without the...

JL Audio built their BassWedge CS210-WXv2 enclosure to make car-rattling bass for a reasonable price, without the...

8 questions - 25 answers

Item # 136210WXV2

Shop all JL Audio Sub Boxes (Loaded)

About the JL Audio CS210-WXv2

John Pollard

JL quality at a great price

JL Audio built their BassWedge CS210-WXv2 enclosure to make car-rattling bass for a reasonable price, without the need for a ton of power. The enclosure's designed to match the two 10" subwoofers loaded into it, so you know you'll get every ounce of performance out of this system.

JL quality at a great price

JL Audio built their BassWedge CS210-WXv2 enclosure to make car-rattling bass for a reasonable price, without the need for a ton of power. The enclosure's designed to match the two 10" subwoofers loaded into it, so you know you'll get every ounce of performance out of this system.

An excellent combination

The CS210-WXv2 BassWedge contains two 10" WXv2 subwoofers that together handle up to 400 watts RMS, loaded into a specially built sealed enclosure. You'll enjoy punchy, detailed bass without taking up too much room in your vehicle's trunk or cargo area

BassWedge CS210-WXv2 enclosure

Solid MDF enclosure

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, nickel-plated push terminals, and solid internal wiring.

Need an amp for this sub? Check out this Crutchfield-approved bass package.

READ LESS

Product highlights:

  • sealed enclosure with two 10" WXv2 subwoofers
  • 5/8" medium density fiberboard construction covered with dark gray carpet
  • 2-ohm impedance
  • power handling: 150-400 watts RMS (800 watts peak power)
  • frequency response: 25-250 Hz
  • sensitivity: 86 dB
  • 32-1/8"W x 12-1/4"H x 7-7/8"D
  • warranty: 2 years
  • MFR # 93292

What's in the box:

  • BassWedge sealed enclosure containing two 10" WXv2-4 subwoofers

Customer reviews for JL Audio CS210-WXv2

Loading reviews...

Average review:

4.5 out of 5 stars
32 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the JL Audio CS210-WXv2

Pat M.

Features & specs

General
Woofer Size (inches) 10
Speakers Per Box 2
Woofer Material Polypropylene
Enclosure Type Sealed
Color Gray
Pieces in System 1
Width (inches) 32-1/8
Height (inches) 12-1/4
Depth (inches) 7-7/8
Connector Type Spring post
Frequency Response 25-250 Hz
Power Range (Watts RMS) 400
Maximum Wattage 800
Sensitivity 86 dB
Impedance 2 ohms
Parts Warranty 2 Years
Labor Warranty 2 Years
The JL Audio CS210-WXv2 replaces these items:

Product Research

Features

Overview: The JL Audio BassWedge sealed subwoofer enclosure is designed around two of JL Audio's 10" WXv2 (4Ω) subwoofers, delivering tight, powerful bass. The MDF enclosure is covered with gray carpet and has a JL AUDIO logo embroidered across the top.

Speaker Terminal: The enclosure uses one pair of high current spring posts; the subwoofers are internally wired in parallel to a single terminal, presenting a 2Ω load to the amplifier. The posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

WXv2 Woofer Features:

  • Dynamic Motor Analysis (DMA): DMA is a JL Audio proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the woofer's motor remains linear in motor force over a long excursion range, and maintains a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
  • Elevated Frame Cooling: The elevated frame design of the 10WXv2 delivers cool air through slots directly above the top-plate to the voice coil. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
  • Rear Gasket: The woofer has an integrated foam rear gasket which provides an optimal seal when installing into the enclosure.

Optional Grille: The optional SGRU-10 grilles (item number 136SGR1031, sold separately) can be added to protect the woofer cones.

Loading accessories...

Customer Q&A

8 questions already asked

Q
I was given subwoofer box for Christmas (model JL Audio CS210-WXv2) and after buying all the other necessary components to power the subs, I discovered that one of the speakers is broken and zero power will reach the second speaker?
jacob becerra  Jan 07, 2017
1 answer
A
If the product was purchased from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connections on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
kenneth  Jan 07, 2017 (Staff)
Q
Will this box fit behind the back seat of a 2011 crew cab superduty?
lee  Oct 30, 2016
2 answers
A
Why don't you read up on the dementions of the box and compare or measure your trucks seat.
manuel  Nov 01, 2016
A
To be honest I'm not sure what you will have to do is measure behind ur seat or where ever you want to put it and compare it to what the specs are for the box
joshua  Oct 30, 2016
Q
I have a 2000 Ford F-250 extended cab does anyone know if this would fit under my back seat?
joe  May 20, 2016
3 answers
A
I have a 05 F-150 extended cab, and it did not fit underneath my back bench seat. I suggest a single. Or you could be like me and just put it in the middle between the driver and the passenger seat. Still a great pair a subs!
garrett  May 27, 2016
A
My best advice is to make a cardboard model of the same dimensions as the sub enclosure. These were my first subs in my car and I have no regret buying them!
bryce  May 22, 2016
A
I think it would. I recently bought these and they are very compact.
rocky  May 20, 2016
Q
Will this fit behind my seat in a 2015 Ford F-250?
chuck  Nov 12, 2015
4 answers
A
Yes it will fit. You have just enough room to fit the setup.
darnell  Nov 13, 2015
A
Not sure what the cab is like. Fit behind my seat in a ram 2500 2006
nate  Nov 13, 2015
A
Probably but measure first before buying. I installed mine behind the back seat of a 76 cj7. Building a cardboard template may help. This is not specifically designed for reg cab trucks so proceed with caution. Brian
christopher  Nov 13, 2015
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Nov 13, 2015 (Staff)
Q
Will this sub enclosure fit behind my seat 2006 f350 crew cab king ranch ?
robert  Jan 02, 2015
4 answers
A
Measured it, it's about 7 inches thick. I can't really give you an answer on if it will fit or not. Measure the space you have and that will give you the definitive answer.
bradley r  Jan 05, 2015
A
THAT WOULD BE A QUESTION FOR TECH SUPPORT. ORIGINALLY I PURCHASED THIS FOR MY 1978 K5 BLAZER, NOW I HAVE IT IN MY 2012 CAMARO. SOUNDS GREAT. I WOULD BUY THIS AGAIN.
david  Jan 05, 2015
A
You have enough space to fit this enclosure behind your seat. Better yet if you have time give crutchfield a call and they can give you the specs on the enclosure dimensions.
darnell  Jan 05, 2015
A
I wouldnt but these subs i r constantly been screwed with them they last a fay or a week then blow on me
emilio  Jan 04, 2015
Q
Will this box fit behind the back seat of my 2006 f350 king ranch crew cab ? Thank you Robert
robert  Dec 31, 2014
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
jeff  Jan 02, 2015 (Staff)
Q
Is this set up for a 2 channel amp or 1 channel?
josh  Aug 27, 2014
7 answers
A
they have only a single set of connectors so a 1- channel amp will be fine. I have mine hooked to a moderate power supply and I love the tightness and solid hits. sounds great from country to pop to rap.
david  Aug 27, 2014
A
The impedence of this dual sub setup is 2-ohm so you could either take a 2-ch amp & bridge it to get the 2-ohms or just go with a mono 2-ohm amp which is what I did. I have the subs down-firing & it works very well. These are great subs.
david  Aug 27, 2014
A
This unit has a 1 channel set-up
michael r  Aug 27, 2014
A
A 2 channel amp and one channel are similar. You can either use a 2 channel and bridge it to a one channel or a mono block amp.
michael  Aug 27, 2014
A
It can be run on either kind of amp but it only has one set of terminals on the box
stephen p  Aug 27, 2014
A
It can be for either a one channel or two channel it's really your preference
darnell  Aug 27, 2014
A
1 Channel
phil  Aug 27, 2014
Q
What amp would best suit these subs? I'm looking for an Alpine amp and I would prefer something of decent-high quality that won't be too expensive ($200-400). It doesn't have to be an alpine amp though.
grant  May 23, 2014
3 answers
A
I was in your shoes about a year ago with these same Subs. I went with an Alpine KTP-445U Head Unit Power Pack 45W x 4 for my 4 JBL speakers & then the ALPINE MRP-M500 300W x 1 mono amp for my JL 10's. I have these in a '92 BMW convertible with the sub box turned over so the subs are "down-firing"... it sounds AWESOME.
david  May 27, 2014
A
alpine MRX M55 Mono Amp Is A Good Amp For Those Subwoofers. Its 550 Watts RMS. ITS 1 To 2 Ohms Stable.
darnell  May 23, 2014
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
greg  May 23, 2014 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound