About the JL Audio CS210G-TW3
Great bass without the loss of space
Great bass without the loss of space
It may look like something from a sci-fi movie, but JL Audio's CS210G-TW3 dual 10” sub enclosure is actually a design marvel. JL Audio put a shallow-mount TW3 10” subwoofer into each end of a sealed enclosure that takes up much less room than conventional dual 10" subwoofer boxes. This system handles up to 800 watts RMS so it'll deliver that fat low end you want, while its dual 8-ohm speaker terminals can be wired to a 4-ohm load for a single amplifier channel.
JL's 10" TW3 shallow-mount sub fits inside their newly designed enclosure.
JL Audio used their extensive engineering know-how to build a super-thin subwoofer that still offers big performance, compressing the sub's motor structure into a shallow package without losing the extended excursion you need to deliver big bass. For you, that means impressive bass in a slender package.
One tough sub enclosure
While they may have cut the corners on the medium density fiberboard (MDF) enclosure, JL didn't cut corners on quality. They incorporated their V-Groove™ construction to ensure rigid box joints that won't leak air or resonate. Combined with the slim subs, this new design gives you a sturdy sub box that doesn't take all your cargo space. JL finished off this ProWedge enclosure with tough polymer grilles on each end that completely protect the subwoofers, unique for an enclosed subwoofer design.
Product highlights:
- sealed enclosure with two 10" TW3 subwoofers
- medium density fiberboard construction covered with black carpet
- high-impact polymer grilles
- dual 5-way binding post speaker terminals
- dual 8-ohm impedance
- power handling: 400-800 watts RMS
- frequency response: 24-200 Hz
- sensitivity: 82.1 dB
- 12-1/8"W x 14"H x 17-3/8"D
- warranty: 2 years
- MFR # 93313
What's in the box:
JL Audio CS210G-TW3 owner's manual
- Sealed ProWedge enclosure with two 10" 10TW3-D4 subwoofers installed
- Warranty information
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for JL Audio CS210G-TW3
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JL Audio CS210G-TW3
Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 10 | |
Speakers Per Box | 2 | |
Woofer Material | Mica-filled IMPP | |
Enclosure Type | Sealed | |
Color | Black | |
Pieces in System | 1 | |
Width (inches) | 12-7/16 | |
Height (inches) | 14-1/4 | |
Depth (inches) | 17-5/8 | |
Connector Type | 5-way posts | |
Frequency Response | 24-200 Hz | |
Power Range (Watts RMS) | 800 | |
Maximum Wattage | 1600 | |
Sensitivity | 82 dB | |
Impedance | 4 ohms | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years |
Product Research
Features
Enclosure: The two JL Audio 10TW3-D4 subwoofers are mounted in the ends of the enclosure, firing in opposite directions. This opposed driver configuration effectively cancels vibration and movement of the enclosure. Each woofer's dual 4Ω voice coils are internally wired in series to present an 8Ω load at each of the two terminals. The two terminals can then be wired in parallel (to present a 4Ω load) or series (to present a 16Ω load).
Terminal: The enclosure features two pair of 5-way binding posts on the left side, one for each woofer. They will accept pin connectors, spade connectors, single banana plugs, dual banana plugs (standard 3/4" width), and bare wire up to 10 gauge.
Enclosure Dimensions:
- Width: 12-7/16"
- Height: 14-1/4"
- Depth: 17-5/8"
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...