About the JL Audio CP110LG-TW1
Engineered for performance
Engineered for performance
JL Audio's CP110LG-TW1 enclosed sub delivers impressive bass from an enclosure that's designed to maximize the impact of its single 10" TW1 subwoofer. This MicroSub handles up to 300 watts RMS, delivering powerful bass response from an enclosure that's just over 6" deep. The enclosure is designed from the ground up to get optimum performance from its driver—extensive inner bracing allows the use of thinner wall material to maximize the internal volume of the enclosure, so you get much more than just a box with a speaker inside. And since JL Audio designed the TW1 speaker specifically for compact enclosures, you know it'll deliver maximum performance.
At less than 6-1/2" deep, this enclosure will fit in some tight spots.
JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, a steel-mesh grille, 5-way binding posts, and solid internal wiring. The enclosure is built and inspected by hand at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.
Small enclosure, big sound
This special-design enclosure will fit in a lot spaces too tight for other boxes. The ported enclosure and TW1 driver keep your bass rich and clear. You'll enjoy dense low-frequency response from all of your music with this capable enclosure in your vehicle.
Highlights:
- ported enclosure with 10" TW1 subwoofer
- medium density fiberboard construction covered with black carpet
- steel-mesh grille
- 4-ohm total impedance
- power handling: 75-300 watts RMS
- 20-7/8"W x 13-1/4"H x 6-3/8"D
- warranty: 2 years
- MFR # 93320
What's in the box:
JL Audio CP110LG-TW1 owner's manual
- Ported enclosure loaded with one 10" 10TW1-4 subwoofer
- Black metal grille (installed)
- Specification card
- Warranty information
Customer reviews for JL Audio CP110LG-TW1
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JL Audio CP110LG-TW1
Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 10 | |
Speakers Per Box | --- | |
Woofer Material | Mica-filled Poly | |
Enclosure Type | Ported | |
Color | Black | |
Pieces in System | 1 | |
Width (inches) | 21 | |
Height (inches) | 13-3/8 | |
Depth (inches) | 7-1/2 | |
Connector Type | 5-way post | |
Frequency Response | 26-200 Hz | |
Power Range (Watts RMS) | 300 | |
Maximum Wattage | 600 | |
Sensitivity | 82 dB | |
Impedance | 4 ohms | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years |
Product Research
Features
Overview: The CP110LG-TW1 MicroSub subwoofer system is a compact bass solution for vehicles with limited space. This ported enclosure is loaded with a single, 4-ohm 10TW1-4 subwoofer.
Enclosure Design: The enclosure features MDF (medium-density fiberboard), constructed using CNC woodworking equipment, and covered with high-grade automotive carpeting. The driver is protected by a black steel-mesh grille. The port and binding posts are both on the same side of the enclosure.
Dimensions:
- Width: 21"
- Height: 13-3/8"
- Depth:
- 6-5/8" (enclosure)
- 7-1/2" (including grille)
Flared Port: The enclosure has a side-firing flared slot-port. The flared slot-port design minimizes turbulence and improves fidelity. The port is approximately 1-3/4" x 5-1/2" at the opening.
Driver: The 10" TW1-4 driver has the following features:
- Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the 10TW1-4 motor remains linear over a long excursion range, and maintains a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, articulate bass.
- Floating Cone Attachment Method (FCAM): JL Audio's patented FCAM technology is a method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
- Mica-Filled Polypropylene Woofer: The subwoofer features an injection-molded, mica-filled polypropylene cone with a rubber surround for added durability, excursion and bass response.
- Concentric Tube Suspension: JL Audio's patented Concentric Tube Suspension employs a molded structure which spans beyond the edge of the motor structure, supporting the spider on the outside of the motor's boundaries and the large diameter voice coil on the inside. The large voice coil permits the magnet to sit inside it, rather than surrounding the coil as is typical in most woofers. The concentric tube structure and the elimination of a conventional top-plate helps JL Audio place the motor higher up into the cone body's space to further compress depth, while still permitting excellent mechanical excursion.
- Thin-Line Design: JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1-4 subwoofer and allows it to deliver great bass performance in tight space applications. Central to the technology is the Concentric Tube structure that supports the oversized voice coil and the suspension attachments. This permits placing the motor structure much further forward in the speaker than conventional designs, while maintaining excellent linear excursion capability. Equally important, the 10TW1-4 is designed for extremely small enclosure applications and there is no pole vent, so no space is needed between the woofer and the back of the enclosure.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...