JL Audio Stealthbox®

Custom-fit fiberglass enclosure with 10" W1v2 subwoofer
Fits 1996-2002 Toyota 4Runner (Gray)

Item #: 13694022

Low Stock

1 Review | Ask Questions

Was:$649.99

Price Break:-$162.50

Your price: $487.49 Earn up to 488 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

View all associated offers

1.888.955.6000

Email

Chat

Does it fit my car?

Select your car

Find what fits your car

Loading...

The JL Audio Stealthbox® custom-fit subwoofer delivers incredible bass in a package that takes up minimal space and blends in with your vehicle's interior. JL Audio designs Stealthboxes to fit in specific vehicles, then loads them with appropriate subwoofers for optimal performance. Pair the system with an appropriate amp and wiring for stellar concealed bass.

Perfect sound to go with the perfect fit
JL Audio puts months of research and design into each Stealthbox® custom-fit subwoofer to ensure not only that it fits, but that it sounds better than any other custom enclosed system. First, JL Audio determines the ideal shape and mounting location for each enclosure, so that it looks like an original part of the vehicle it's designed for. Next, they mount each high-performance subwoofer so it delivers amazing firepower from within its unique enclosure, without sacrificing clarity or musical depth.

The fiberglass enclosure offers superior rigidity while allowing more interior volume, so the sub can turn out louder, deeper bass. JL Audio craftsmen then laminate, grind, join, and finish each Stealthbox® by hand. The end result: full-bodied, distortion-free bass from an impressively stealthy enclosure.

Enjoy enhanced, custom-fit sound
This Stealthbox® enclosure fits 1996-2002 Toyota 4Runner SUVs. It installs in passenger side rear corner of cargo area. This Stealthbox® includes one W1v2 10" 4-ohm subwoofer from JL Audio. Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information.

JL Audio has rated the difficulty of this Stealthbox® installation as moderate or high. Crutchfield recommends using a car audio professional to install this enclosure, unless you have extensive experience installing car audio gear.

Product Highlights:

  • Stealthbox® custom-fit subwoofer
  • sealed fiberglass enclosure
  • W1v2 10" 4-ohm subwoofer
  • carpeted steel grille included
  • installs in passenger side rear corner of cargo area
  • power handling: 50-300 watts RMS (600 watts peak power)
  • warranty: 2 years
  • Our 60-day money-back guarantee

Vehicle-specific enclosures with subs? Say what?

Instead of the usual sub in a box, the manufacturer creates a molded enclosure that fits perfectly into a convenient spot in your specific vehicle, housing a high-quality sub. Some enclosures even include a built-in amp, for the ultimate in stealth bass. The advantages? You don't lose much space (if any), your sub is perfectly matched to its enclosure, and your enclosure has a factory look that won't tell potential thieves you have an awesome sound system. Doesn't get better than that.

Hands-on research

What's in the box?

Download owner's manual

  • Custom subwoofer box with one loaded 10" woofer
  • Bolt
  • 2 Fender washers
  • Split-lock washer
  • 4x4" Wax sheet
  • Installation Guide
  • Warranty sheet

Product Research

Features

Overview: JL Audio's Stealthbox subwoofer systems are designed to hide away in a specific vehicle. Please consult "Outfit My Car" to confirm compatibility with your vehicle.

Construction: Stealthboxes are hand-crafted from fiberglass and/or Advanced Molded Composite (AMC) materials. Fiberglass delivers a level of enclosure rigidity and dimensional stability not possible with other enclosure materials, allowing wall thickness to be reduced compared to a typical wood enclosure. This gives you more interior box volume for a given external volume. Fiberglass and AMC materials are very strong and can be molded into very complex shapes; giving JL Audio the ability to design your Stealthbox to fit perfectly into tight spots and minimize intrusion into your vehicle's useful space. Each Stealthbox is laminated, ground, joined, and finished by hand in the USA. Proprietary techniques and materials developed by JL Audio through years of fiberglass manufacturing experience ensure consistent quality and performance.

Woofer: One 10-inch, 4-ohm JL Audio W1v2 subwoofer is loaded in this custom sealed enclosure.

  • Surround Stress Relief: By creating a radius feature on the edge of the cone, stress is relieved from the surround material at maximum forward excursion, resulting in longer life and more consistent surround behavior.
  • Interlocking Cone & Dust Cap: The W1v2's utilize a dust cap that is not just glued, but also interlocks with features molded into the cone body for a tight snap-fit. This creates a more rigid cone assembly and a more reliable dust cap attachment.
  • Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method aimed at improving dynamic motor behavior. As a result of DMA optimization, W1v2 motors remain linear in motor force over a very long range of excursion, and also maintain a highly stable fixed magnetic field in the gap over a wide power range. The result is vastly reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
  • Floating Cone Attachment Method (FCAM): JL Audio's patented FCAM technology is an innovative method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
  • Vented Reinforcement Collar: The Vented Reinforcement Collar (VRC) is a composite structure that addresses two issues related to reliability.
    • Stress Relief: By reinforcing the critical junction between the cone, voice coil and spider, the VRC greatly reduces failures due to glue breakdown or material weakness. It does this by greatly increasing adhesive contact area and providing stress relief to the spider material at excursion extremes
    • Air Flow: The VRC also features slots that facilitate air flow directly onto the voice coil windings. This reduces thermal compression effects and enhances reliability
  • Insert Molded Suspension/Coil/Terminal Sub-Assembly: The W1v2 features a unique spider, coil and terminal subassembly which is assembled prior to installation in the speaker frame for optimum alignment and glue-joint integrity. This type of assembly ensures precise lead wire length, lead wire entry and exit angles; and coil to spider perpendicularity.
  • Elevated Frame Cooling System: The elevated frame design of the W1v2 delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

JL Audio Stealthbox® Reviews

Average Customer Review:

1 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Needs a Better Installation Method

Written By Sam, Middle Georgia on Sunday, January 04, 2009

Great concept, but the installation method could be improved. Sub itself is great. I have it paired with a JL Audio Slash v2 Series 250/1v2 amp and it provides just what I was looking for. The problem is the way you mount the sub via the wheel well. The bolt provided was too short to pierce the wheel well and thread into the insert that's in the enclosure. After purchasing/trying a longer bolt, the threaded insert separated from the enclosure...yes, the second bolt was the correct type, just a 1/2 inch longer. So, I had to run back to the hardware store and purchase washers and nuts to fasten from the inside of the enclosure. The wheel well mount is the only point my enclosure attaches to the vehicle. My 99 4Runner has the longer storage box, so it doesn't get any support from a smaller square hole like the one pictured in the ad. This also causes the back end of the storage box to show even with the enclosure installed. And I had to shim the enclosure to get it to sit flush against the wall. Bottom line, Crutchfield did their part (as always), the performance of the sub/amp are great, but the mounting concept needs to be improved.

Questions & Answers Ask the community. Share your knowledge.

Searches related to the JL Audio Stealthbox® Custom-fit fiberglass enclosure with 10" W1v2 subwoofer
Fits 1996-2002 Toyota 4Runner