Features

JL Audio StealthMod System: The StealthMod system has been thoroughly tested and engineered by JL Audio's development team. When mated with the SB-GM-CAMCONV Stealthbox subwoofer enclosure (item number 13694526, sold separately), the system offers dramatic improvements in low-frequency extension and quality, significantly greater clean output capability, better imaging and better-balanced high-frequency response than the factory system. The difference is most impressive with the top down as the additional power on the front speaker system really helps overcome road and wind noise.

Vehicle Compatibility: This particular StealthMod package has been designed for 2011 and later Chevrolet Camaro Convertibles. It will not fit the Camaro Coupe. Please consult the Crutchfield Car Selector to see if your vehicle is compatible.

System Components: This system includes the JL Audio C3-650 component speakers to replace the factory speakers in the front doors of the Camaro and an XD700/5 system amplifier to power the C3-650s and the Stealthbox subwoofer enclosure (item number 13694526, sold separately). Filters are also provided to modify the crossover point of the factory tweeters for better system performance. The factory system continues to power the rear speakers. The supplied HD-RLC Remote Level Control can be mounted in the front of the vehicle to be used as an easily accessible subwoofer level control.

Component Speakers (C3-650): The JL Audio Evolution C3-650 convertible component system includes 6-3/4" woofers with injection-molded polymer frames, mineral filled polypropylene cones, butyl rubber surrounds, ferrite magnets, and 1.2" voice coils with Kapton formers. The 1" silk dome tweeters are Ferro fluid cooled and use neodymium magnets. Silk is lightweight and great for high frequency extension and efficiency. It is also designed for durability in the extreme automotive environment. The C3 tweeters mount coaxially inside the C3 woofer cones, while your Camaro's factory tweeters' crossovers are modified using the included capacitors. The crossover network has an electronic tweeter protection circuit built in; it monitors the current and disconnects the tweeter when it senses and overload. The circuit automatically resets once the overload is removed.

5-Channel Amplifier (XD700/5): The JL Audio XD700/5 is a five-channel, class-D amplifier utilizing NexD ultra-high speed switching technology to deliver outstanding fidelity and efficiency. The 5-channel amplifier is configured at 200 watts RMS x 2 bridged (at 4Ω) + 300 watts RMS x 1 (at 2Ω) for this system. NexD is a state-of-the-art switching amplifier design that combines exceptional audio quality with excellent efficiency and less complexity. This results in an affordable compact amplification with exceptional audio quality and unsurpassed total efficiency. The XD-Series amplifier employs advanced thermal and low-impedance protection to virtually eliminate annoying amplifier shut-down events. Should the XD-Series amplifier ever overheat, its intelligent, unregulated power supply reacts by limiting available peak voltage until the amplifier returns to a safe temperature range. Likewise, if an impedance lower than optimal for the amplifier is present at the outputs, the XD amplifier will roll back peak voltage to protect itself without shutting down.

• Controls:
  • Simplified Gain Setting: The XD Series amplifier makes setting the gain level of the amp via the input sensitivity control very simple. All you need is Digital AC Voltmeter (sold separately) and a Test CD Disc (item number 503CD104, sold separately) with a sine-wave test-tone recorded at 0 dB reference level in the frequency range to be amplified for that set of channels (50 Hz for subwoofer channels, 1 kHz for a midrange application). The XD700/5 is equipped with a independent gain controls for the 1/2, 3/4, & 5 channels.
  • Flexible Input Section And Active Crossover Network: The JL Audio XD amplifier provides a flexible input section and a comprehensive crossover network to fine tune your system effectively and accurately. The variable filter design employed in the JL Audio XD amplifier crossover sections allow you to seamlessly switch slopes, easily change filter frequencies and address what frequencies the preamp inputs will pass. The XD700/5 offers the following independent crossover adjustments for the front, rear, and subwoofer channels along the unit's top panel, behind a removal cover plate.
• Connections:
  • Power/Ground/Turn-On Terminals: The amplifier features set-screw terminals for the power, ground, and remote turn-on connections.
  • Speaker Output Terminals: The XD700/5 amplifier's twelve set-screw speaker terminals will accept 16 to 8 AWG speaker wire. A 2.5mm hex-wrench is supplied for making connections.
  • Preamp Inputs: The amplifier features 3 pair of differential-balanced RCA jack inputs. The amplifier features a dedicated Input Sensitivity gain control for the front 1/2, 3/4, and 5 channels of the amplifier. These controls are designed to match the input sensitivity of the HD700/5 to the specific signal source that is feeding it. The amplifier's input level can be set independently for all channels between 100mV-4V.

Remote Level Control (HD-RLC): The wired remote level control lets you control the volume of all channels, or just the subwoofer channel of the XD700/5 from the front of your vehicle. This is useful for subwoofer level control or even as a master volume control for your system.

Warranty Information: The installation of a StealthMod system will likely invalidate the factory warranty of the OEM (factory) audio system. JL Audio's warranties only cover the installed JL Audio equipment and do not extend to cover any failures of OEM (factory) equipment.