Crutchfield Customer Review (What's this?)
Pros: Great sound to the speakers
Cons: Sub out is kinda weak
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 13698258
$799.99 Earn up to 800 Rewards points
XD1000/5v2 connection and control panels
JL Audio's XD1000/5v2 amp packs a wallop far beyond what you'd expect from something so small. This compact amp plays your music with true fidelity and impressive impact, without straining your car's electrical system. A cast alloy heatsink and an advanced cooling system keep this amp at optimal temperature, eliminating thermal shut-downs so your music keeps going strong without interruption.
This 5-channel amp can power your vehicle's entire system, delivering 75 watts RMS to each of your front and rear speakers, while powering a sub with up to 600 watts. You can also switch to 3-channel mode, and power a pair of high-performance speakers with 200 watts each, while still driving a sub with 600 watts.
High- and low-pass filters give you intimate control over the character of your sound. "Differential-balanced" inputs keep the signals clear of outside noise, and allow you to connect this amp to just about any in-dash stereo, even a factory radio with no preamp outputs. An optional wired remote lets you tweak the level of the subwoofer or the whole system from your front seat.
XD1000/5v2 control panel
William B, mc lean, VA
Pros: Great sound to the speakers
Cons: Sub out is kinda weak
This amp fit cleanly under the passenger seat of my '16 Subaru. Unless you are just trying to annoy people this has more power than you'll need. It drives a single 10" Infinity sub, coax Alpine and Infinity Kappa components to the point you'll need hearing protection before it distorts. I'm interested in quality more than volume so this was my choice and I couldn't be happier.
Pros: compact size, plenty of power, easy connection, runs entire system with one small amp.
Cons: Does not sense speaker wire short. I don't know if that's regularly done but this thing puts out enough power to fuse and burn speaker wires without shutting down or overloading. Could potentially cause a fire in the right conditions; requires capable installation.
THIS AMP IS SMALL SLICK VERY CLEAN AND (((((((POWERFULLLLL)))))) HAVE IT RUNNING C5'650 N C2650X AND A HO12W6V3 WITH AN ALPINE HD149BT THIS SYSTEM SLAMS YET PLAYS VERY BEAUTIFUL THE HEART OF MY SYSTEM IS THIS XD1000/5V2 WOULD HIGHLY RECOMMEND IT *****
Replaced two older amps with this single unit. Wasn't sure if this physically tiny amp was going to be able to provide the power I needed. No worries about that anymore. Clean, clear and able to play loud for as long as your ears can handle it. Powering a JL C5, JL C3 and two JL 10w3. Source unit is the factory Ford radio and the JL CleanSweep.
Pros: Small and powerful
Great product. The amp has more than enough power to run my entire system, and it's small size made locating it very simple. This is my first time running JL Audio anything, and I have to say, their repuatation is well deserved.
Pros: Simple, Clean Setup. Small Footprint.
|RMS Power Output (Watts x Channels)||
75 x 4
400 x 1
|Peak Power Output (Watts x Channels)||N/A|
|Power at 2 Ohms (Watts x Channels)||100 x 4|
|Bridged Power (Watts x Channels)||200 x 2|
|Minimum Impedance Bridged||4|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||10-22k Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||104 dB|
|Low-Pass Crossover Frequency||50-500 Hz|
|Low-Pass Slope (dB/octave)||12 or 24 dB/octave|
|High-Pass Crossover Frequency||50-5000 Hz|
|High-Pass Slope (dB/octave)||12 dB/octave|
|Bass Boost Frequency||N/A|
|Speaker Level Inputs||RCA (adapter req)|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
5-Channel Amplifier: The JL Audio XD1000/5v2 is a five-channel, Class-D amplifier utilizing NexD ultra-high speed switching technology to deliver outstanding fidelity and efficiency. Four of the five channels are full range; two stereo pair, channels 1&2 and channels 3&4. The fifth channel is designed to power a subwoofer. The amp can be operated with a wide variety of source units and system configurations.
Specifications: The XD1000/5v2 is rated at 75 watts RMS x 4 plus 400 watts RMS x 1 at 14.4 volts, measured into 4Ω from 20 Hz to 20 kHz (for the full range channels) with no more than 1% THD+N. The four channel section is bridgeable to 200 watts RMS x 2-channels at 14.4 volts, measured into 4Ω from 20 Hz to 20 kHz with no more than 1% THD+N. Each pair of full range channels (1&2 and 3&4) is independently bridgeable, so the amp can be used in 5-channel, 4-channel, and 3-channel mode. The 2Ω output is 100 watts RMS x 4 plus 600 watts RMS x 1 at 14.4 volts, measured from 20 Hz to 20 kHz (for the full range channels) with no more than 1% THD+N. The subwoofer output is also given at 3Ω; 500 watts RMS x 1 at 14.4 volts with no more than 1% THD+N. The Signal to Noise ratio is 104 dB for the full range channels and 100 dB for the subwoofer channel at rated power, and 84 dB for the full range channels and 80 dB for the subwoofer channel at 1 watt.
NexD Class D Technology: NexD is a switching amplifier design that combines exceptional audio quality with excellent efficiency and less complexity. This results in an affordable compact amplifier with exceptional audio quality and total efficiency.
Advanced Rollback Protection: The XD-Series amplifiers employ advanced thermal and low-impedance protection to virtually eliminate annoying amplifier shut-down events. Should any XD-Series amplifier overheat, its intelligent, unregulated power supply reacts by limiting available peak voltage until the amplifier returns to a safe temperature range. Likewise, if an impedance lower than optimal for the amplifier is present at the outputs, the XD amplifier will roll back peak voltage to protect itself without shutting down.
Differential-Balanced Inputs: The amplifier features differential-balanced input architecture to effectively control noise and ensure compatibility with a wide variety of source units, including many OEM systems. Without resorting to line output converters, you can directly connect most OEM source units to the JL Audio amplifier without creating any noise or compatibility issues. Unlike conventional single-ended inputs, the differential-balanced design does not connect one side of the audio signal to chassis ground. This eliminates any voltage sensitivity between one input terminal and ground and greatly reduces the incidence of alternator whine in a typical car audio installation.
Note: You will need up to three speaker wire to RCA adaptors (136XDCLR2S, sold separately) to connect this amplifier to your headunit's speaker-level outputs.
Protection Circuitry with Status LED: There is a single multi-color LED on the top panel to indicate the amplifier's operating status.
Cooling System: The outer shell of the JL Audio amplifier is designed to remove heat from the amplifier circuitry. For optimum cooling performance, this outer shell should be exposed to as large a volume of air as possible. Enclosing the amplifier in a small, poorly ventilated chamber can lead to excessive heat build-up and degraded performance.
Control Panel Cover: The XD1000/5v2 features a Control Panel Security Cover which protects and hides the amplifier's controls. When installed, the cover ensures that the amplifier's settings are not accidentally changed, while creating a clean aesthetic look for the amplifier and your installation. The cover is installed at the factory and must be temporarily removed for access the amplifier's controls. The security cover is secured by two 2.5mm Allen-head machine screws.
Gain Setting: The XD Series amplifiers have independent gain (input sensitivity) controls for each pair of output channels; in this case, 1&2, 3&4, and subwoofer. Using JL Audio's guided set up requires a digital AC voltmeter and a test CD (item number 503CD104, sold separately) with a sine-wave test-tone recorded at 0 dB reference level in the frequency range to be amplified for that set of channels (50 Hz for subwoofer channels, 1 kHz for a midrange application).
Input Voltage: The input voltage range is broken into two sub-ranges (the sub-range is set simultaneously for all inputs, but the three sections have independent gain controls to set the specific voltage):
Remote Level Mode: When the optional HD-RLC wired remote is added, use this switch to set which channels are affected:
Turn-On Mode: There are three options for turning the amp on, selected using the Turn-On Mode switch:
Crossovers: Each section of the amplifier has an independent crossover:
Power/Ground/Turn-On Terminals: The amplifier features screw clamp terminals for the power, ground, and remote turn-on connections.
Note: The Amplifier is not equipped with a fuse. An external 80-amp fuse (not included) must be installed on the power wire. If a wiring kit is used which includes a fuse with a value other than 80-amps, the original should be replaced with an 80-amp fuse.
Speaker Output Terminals: The XD1000/5v2's screw clamp speaker terminals will accept 16 to 8 AWG speaker wire. The included 2.5mm Allen wrench is used for making connections.
Note: The two subwoofer outputs are internally wired in parallel, making it easy to connect two subwoofers (minimum impedance 4Ω each when using both).
Preamp Inputs: The amplifier has three pair of differential-balanced stereo RCA inputs; each pair has a dedicated gain control designed to match the input sensitivity of the amp to the specific signal source feeding it. In addition to preamp level signals, the RCA inputs are also used with speaker level signals (136XDCLR2S required and sold separately).
Remote Level Control: The amplifier features an RJ-14 telephone jack for adding an optional wired remote level control. With the addition of the optional wired remote (item number 136HDRLC, sold separately), you can control the volume of all channels of the XD1000/5v2, or just the subwoofer channel, from the front of your vehicle. This is useful for subwoofer level control or even as a master volume control for your system. If desired, multiple XD amplifiers can be controlled from a single HD-RLC controller using a simple phone line splitter and multiple phone cables (all sold separately).
Note: All inputs and outputs are located on one side of the amplifier to make installation simple and neat.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
there are two "+" positive connections and two "-" negative connections. This is to facilitate multiple subwoofer wiring. The two positive and two negative connections are connected in parallel inside the amplifier They are not stereo outputs.s. It is rated for 300W into 2 ohms, 250W into 3 ohms and 200W into 4 ohms (Continuous Power, RMS Method). i'm running a 10 jl @ 2 ohms and the amp does not heat up much [ DARRELL Nov 30, 2015 ]
Close, correct for speaker theory amp practice gets more complex. power ratings from the amp specs on Crutchfield: Product Highlights: 5-channel car amplifer 75 watts RMS x 4 + 400 watts RMS x 1 (at 4 ohms) 100 watts RMS x 4 + 600 watts RMS x 1 (at 2 ohms) 200 watts RMS x 2 bridged at 4 ohms + 600 watts RMS x 1 at 2 ohms Voice coils in series also need to be in phase I hope your sub includes directions if not trial & error can get you there if you know that out of phase will cancel out and just generate heat, low power test always. [ Alex Nov 25, 2015 ]