Woofers: The JL Audio Evolution C2-650 component speakers
feature 6-3/4" injection-molded, mica-filled polypropylene cone woofers
with butyl rubber surround. The woofer has a 1.0" voice coil on a Kapton
Former, a flat symmetrical roll spider, and a Ferrite magnet.
Tweeters: The Evolution C2-650 coaxial speakers feature a
0.75" silk dome, ferrofluid-cooled tweeter with a damping neodymium magnet.
Silk is lightweight and great for high frequency extension and efficiency. It is
also designed for durability in the extreme automotive environment. Flush and
surface tweeter mounting brackets are included.
||Screw holes only
||Screw depth only
Two-way Crossover System: The C2 component system utilizes
a true 2-way crossover system with Mylar capacitors and air-core inductors:
- High Pass: second order (12
dB/octave slope); three tweeter level settings are
selectable via jumper pins: +2.0 dB, Reference, and
- Low Pass: first order (6
Tweeter Protection: The crossover network has an electronic
tweeter protection circuit built in; it monitors the current and disconnects the
tweeter when it senses and overload. The circuit automatically resets once the
overload is removed.
Crossover Wiring: The terminal strip will accept bare wire
or spade connectors up to 0.31" wide.
- Width: 3.365"
- Height: 1.445"
- Depth: 4.732" (plus wire)
Connection Note: The C2 component system comes with no speaker
wire. Instead, a number of spade connectors and quick slides are included in the
hardware pack to be crimped onto speaker wire you provide.
Size Classification Note: Crutchfield has traditionally referred
to this size speaker as a 6-3/4", while some manufacturers, including JL Audio,
call it a 6-1/2". Please refer to the Crutchfield Vehicle Selector for the proper
size of speaker for your vehicle.
Power Handling: JL Audio lists two power figures in the
manual; 60 watts continuous power handling and recommended amp power 15-100
watts RMS. We've listed the RMS power recommendation in the specs table.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.