Skip Navigation


Signal summing interface for CL441dsp CleanSweep™

1 Review

Item #: 136CLSSI

This item is no longer available.

Shop all Sound Processors for Factory Radios



Our take on the JL Audio CL-SSI

The JL Audio CL-SSI signal summing interface lets you use the CL441dsp CleanSweep when you have a factory-installed "premium" sound system that doesn't send full-range signals to all of its speakers.

The JL Audio CL-SSI signal summing interface lets you use the CL441dsp CleanSweep when you have a factory-installed "premium" sound system that doesn't send full-range signals to all of its speakers.

The CL-SSI combines the bass, midrange, and high-frequency outputs from your premium factory system, and presents a full-range stereo signal to the CleanSweep. The CleanSweep then removes the factory-set equalization from the signal before it travels to your aftermarket amplifiers, speakers, and subwoofers, so you get the best possible sound quality.

What's in the Box:

  • OEM Signal Summing Interface
  • 39" Power connection harness
  • 40" Output harness
  • Three 39" Speaker input harnesses
  • Owner's Manual

Product Highlights:

  • signal-summing interface for use with the CL441dsp CleanSweep
  • combines factory system signals into full-range outputs
  • dimensions: 5-1/16" x 4-3/8" x 1-9/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee


Average Customer Review(s):

(1 Review)

jl audio summing interface

markn from omaha, ne on 4/30/2011

Crutchfield Customer Review (What's this?)

The product works well however I am having trouble holding the green lights for proper summing. This is probably not the products fault. The factory amp/crossover constantly changes the level for the factory sub output and throws the summing interface off. I was hoping the SSI would hold the green lights for proper summing.




Hands-on research

Product Research


Overview: The JL Audio CleanSweep CL-SSI is a dedicated signal summing interface for integrating with "premium" OEM sound systems that do not present full-range audio signals and can be configured to merge 2-way or 3-way OEM signals prior to sending them into a JL Audio CleanSweep CL441dsp OEM Audio Interface (sold separately) for response correction. 

Note: The CleanSweep CL-SSI Signal Summing Interface is not a stand alone unit and must be used in conjunction with JL Audio's CleanSweep CL441dsp OEM Audio Interface (sold separately).

2-Way or 3-Way Summing Capabilities: The CL-SSI can be operated in two distinct modes to address OEM signal that have been filtered using 2-Way or 3-Way crossovers. The unit's 2-way or 3-way summing capability provides exceptional application flexibility without the need for y-adaptors, LOC's or any other external accessories.

2-Way Mode: In this mode, the CL-SSI will sum an OEM subwoofer (or woofer) signal to front and rear signals that have been high-pass filtered, creating front and rear full-range output channels while retaining the functionality of the OEM front-to-rear fader control.
3-Way Mode: In this mode, the CL-SSI will sum an OEM subwoofer or woofer signal (low-pass filtered) to a mid-bass or midrange signal (bandpass filtered) and to a high frequency signal (high-pass filtered), creating a two-channel, full-range stereo output.

Differential-Balanced Inputs: Differential-Balanced Inputs ensure noise immunity and compatibility with a wide range of OEM source units and amplifiers, including those with load-detecting startup logic. Input Range Switching allows any combination of line-level or speaker-level signals to be used as inputs, permitting accurate level setting.

Intuitive Level Settings Indicators: The CL-SSI allows you to quickly balance signal levels without additional equipment. Each input section of the Signal Summing Interface features a green LED optimum level indicator flanked by LED's indicating "Too Low" or "Too High". This allows for quick and accurate level matching via the Level Trim controls in a matter of seconds.

Signal Sense Modes: The CL-SSI interface is designed to act as a turn-on and turn-off control for the JL Audio CleanSweep CL441dsp (sold separately), which will control the turn-on of the rest of the aftermarket equipment in the system. There are two modes of turn-on operation which can be selected.

Signal Sense On: In this mode, the CL-SSI will only wake up and turn on the CL441dsp when it sense +12V and also sense an input signal from the OEM audio sources. The CL-SSI will go into Standby Mode approximately one minute after it sense a loss of input signal or as soon as the ignition is turned off.
Signal Sense Off: In this mode, the CL-SSI can be activated by a conventional 12-volt trigger, in the rare event that the OEM system provides one.

Connections: The JL Audio CL-SSI Signal Summing Interface features the following connections.

Power Connector: The CL-SSI has a 4-pin inline jack that accepts the following connection through the included color-coded wiring harness - Constant +12V, Chassis Ground, Switched +12V, Amplifier Turn-On +12V. Since the CL-SSI does not draw very much current during operation, 18 to 16 AWG wire is ample for making all of these connections.
Output Connector:
The CL-SSI's output harness is designed for direct connect the OEM input connector of the JL Audio CL441dsp (sold separately).
Input Connectors: The CL-SSI accepts up to six channels (three stereo pairs - Input A, Input B, Input C) of band-limited input from an OEM audio source via three 4-pin plugs. Three color-coded input harnesses are included for connection to each of these plugs.



Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.