Overview: The JL Audio CleanSweep CL-SSI is a dedicated
signal summing interface for integrating with "premium" OEM sound systems that
do not present full-range audio signals and can be configured to merge 2-way or
3-way OEM signals prior to sending them into a JL Audio CleanSweep CL441dsp OEM
Audio Interface (sold separately) for response correction.
Note: The CleanSweep CL-SSI Signal Summing Interface is not a
stand alone unit and must be used in conjunction with JL Audio's
CleanSweep CL441dsp OEM Audio Interface (sold separately).
2-Way or 3-Way Summing Capabilities: The CL-SSI can be operated in two
distinct modes to address OEM signal that have been filtered using 2-Way or
3-Way crossovers. The unit's 2-way or 3-way
summing capability provides exceptional application flexibility without the need
for y-adaptors, LOC's or any other external accessories.
In this mode, the CL-SSI will sum an OEM subwoofer (or woofer) signal to
front and rear signals that have been high-pass filtered, creating front and
rear full-range output channels while retaining the functionality of the OEM
front-to-rear fader control.
3-Way Mode: In this mode, the CL-SSI will sum an OEM subwoofer or
woofer signal (low-pass filtered) to a mid-bass or midrange signal (bandpass
filtered) and to a high frequency signal (high-pass filtered), creating a
two-channel, full-range stereo output.
Differential-Balanced Inputs ensure noise immunity and compatibility with a wide
range of OEM source units and amplifiers, including those with load-detecting
Input Range Switching allows any
combination of line-level or speaker-level signals to be used as inputs,
permitting accurate level setting.
Intuitive Level Settings Indicators: The
CL-SSI allows you to quickly balance signal levels without additional equipment.
Each input section of the Signal Summing Interface features a green LED optimum
level indicator flanked by LED's indicating "Too Low" or "Too High". This allows
for quick and accurate level matching via the Level Trim controls in a matter of
Signal Sense Modes: The CL-SSI interface
is designed to act as a turn-on and turn-off control for the JL Audio CleanSweep
CL441dsp (sold separately), which will control the turn-on of the rest of the
aftermarket equipment in the system. There are two modes of turn-on operation
which can be selected.
Signal Sense On: In this mode, the
CL-SSI will only wake up and turn on the CL441dsp when it sense +12V and
also sense an input signal from the OEM audio sources. The CL-SSI will go
into Standby Mode approximately one minute after it sense a loss of input
signal or as soon as the ignition is turned off.
Signal Sense Off: In this mode, the CL-SSI can be activated by a
conventional 12-volt trigger, in the rare event that the OEM system provides
Connections: The JL Audio CL-SSI Signal
Summing Interface features the following connections.
Power Connector: The CL-SSI has a
4-pin inline jack that accepts the following connection through the included
color-coded wiring harness - Constant +12V, Chassis Ground, Switched +12V,
Amplifier Turn-On +12V. Since the CL-SSI does not draw very much
current during operation, 18 to 16 AWG wire is ample for making all of these
Output Connector: The CL-SSI's output harness is designed for direct
connect the OEM input connector of the JL Audio CL441dsp (sold separately).
Input Connectors: The CL-SSI accepts up to six channels (three stereo
pairs - Input A, Input B, Input C) of band-limited input from an OEM audio
source via three 4-pin plugs. Three color-coded input harnesses are included
for connection to each of these plugs.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.