You know you're holding a serious piece of sound equipment when you feel the heft of a JX amp. JL Audio designed these amplifiers with sturdy, high-grade parts that ensure excellent heat management, provide high current flow, and deliver stable performance in almost any situation. You won't find blinking lights or meters on the outside of these amps, but you will find oversized output transistors and rugged MOSFET power supplies inside. The sleek, high-mass aluminum heatsink keeps things cool enough to virtually eliminate thermal shut-downs.

The JX360/4 4-channel amp delivers 70 watts RMS per channel to your front and rear speakers, and it's a great match for high-quality component speakers. You can also switch over to 2-channel mode, and power a pair of subs with 180 watts RMS each. Use the variable low-pass filter and bass boost to tune the amp to your subwoofer system. The amp includes speaker-level inputs, along with preamp inputs and outputs, so it's ready to work in virtually any system.

Product Highlights:

  • 4-channel car amplifier
  • 70 watts RMS x 4 at 4 ohms (90 watts RMS x 4 at 2 ohms)
  • 180 watts RMS x 2 at 4 ohms
  • Class AB amplifier design
  • MOSFET switching power supply
  • frequency response: 20-20K Hz
  • variable high- and low-pass filter (50-200 Hz, 12 dB/octave)
  • preamp inputs and outputs
  • speaker-level inputs
  • 4-gauge power and ground leads and a 50-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 50-amp in-line fuse between the distribution block and the amplifier is recommended
  • 16"W x 2-3/16"H x 7-11/16"D
  • warranty: 2 years
  • Our 60-day money-back guarantee

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

JL Audio JX360/4 Reviews

Average Customer Review:

9 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

nice power

Written By rico, Spring TX on Sunday, March 08, 2015

Crutchfield Customer Review (What's this?)

nice upgrade to any vehicle

Pros: lots of power


Written By raiderdom, California on Sunday, January 25, 2015

Crutchfield Customer Review (What's this?)

Great looking, clean functional power. More than I expected


Written By Seth, Monroe,NC on Monday, August 04, 2014

Great amp I knew this amp would be good but when I hooked it up I had engine noise bad.Then I remembered I ran the rca and power wire's on the same side my mistake that's a big no no.Luckily I was able to tune the amp and get rid of the noise just turned down the gain and offset the volume on my head unit.JL saved me again I sure didn't want to have to rip the wire's back out.sounds great!

Pros: Reliable flexibility does what it is supposed to

Cons: Size could be smaller

clean sound

Written By Pony RN, Surprise, AZ on Tuesday, April 29, 2014

Crutchfield Customer Review (What's this?)

The amp delivers great clean sound throughout the sound spectrum. I installed it in my car that has high performance loud exhaust. This amp still provides the level of volume and quality of sound I require. Great product for most any application. It looks great mounted on the backs of my seats as well.

Pros: Great value. Great sound. Cool looking.

Cons: None

JL Audio JX360/4

Written By Anonymous, Holly springs nc on Wednesday, February 05, 2014

Crutchfield Customer Review (What's this?)

Great amp!

Pros: Easy to install!

Couldn't ask for any more!

Written By Addison, Miami Beach, FL on Thursday, November 21, 2013

Crutchfield Customer Review (What's this?)

What an amplifier. This will be the third amplifier I have replaced with a JL one, I could not be happier!

JL's product is literally second to none. With all the settings available and the power to push any speaker, this is the best choice for a 4-channel amp.

Pros: Easy to use! Many variable settings (HPF, LPF, input level...)

Cons: None.

great amp for price

Written By kurtis, pa on Saturday, May 18, 2013

Have it in a full size bronco running 4 alpine type r plays loud and clear

Pros: Works great cheap amp

Cons: It could be smaller


Written By Mustang Dan, dracut mass on Wednesday, July 04, 2012

All i can say is wow and wow if i could give it more than a 5i i would I was kinda turn off by the price seem kinda low for a good amp but the amp is great cant ask for more the price is very low for what you get cant ask for more does JL make anything that isnt top of the line? i think not

Pros: $$$$ loud clean

Cons: JL audio never has cons they dont sell something if it isnt great

Excellent Amp from an Excellent Brand

Written By Skirmich, San Diego, CA on Sunday, July 03, 2011

This amp was bought to mate with a JL SLASH 500/1v2 and WoW what an Awesome System! Incredible sound and Loud very very Loud with ZERO Distortion.


-Aluminium Heatsink

-Built Quality (Impressive)

-Independent HPF & FQs

-Clear + Zero Distortion Sound

-4 AWG Power Cables and Grounds


-A little Large

-No 24db/oc < But not Important for my Setup.

-Price a bit Steep but you Can Find better Prices if You Look Right...

NOTE: If you care for adjust the Gains from the Manual just make Sure you dont go Beyond 16v output + Adjustments (Bass Boost, Etc.) it Will go into Protect in 20 minutes with a Moderate Volume. (Im Sitting at 14.80v Fronts and 15v Backs) and I can crank the volume all the way +3/4 without clipping or distortion and its so Loud I cant hear a person sitting besides me...

Hands-on research

What's in the box?

Download owner's manual

  • 4-Channel full-range amplifier
  • Two 10" Speaker-level harnesses
  • 4 Mounting screws
  • 4 Flat washers
  • Hex-key
  • Owner's Manual

Product Research



Four-channel Class A/B Amplifier: The JL Audio JX360/4 is a four-channel, full-range (20-20,000Hz) audio amplifier utilizing Class A/B technology. The JX360/4 can be operated with a wide variety of source units (aftermarket or factory) and system configurations (4-channel, 3-channel, 2-channel, or mono).

MOSFET Switching Power Supply: The JL Audio JX series four-channel amplifier employs a rugged MOSFET power supply for outstanding reliability and operational stability.

Amplifier Ratings:

JX360/4 Amplifier Specifications Channels Watts Ohms Frequency Response Signal-to-Noise THD
Rated Continuous (RMS) Power @ 14.4V 4 70 4 20-20,000 Hz 80 dB 1%
4 90 2 20-20,000 Hz 80 dB 1%
2 (bridged) 180 4 20-20,000 Hz 80 dB 1%
Rated Continuous (RMS) Power @ 12.5V 4 55 4 20-20,000 Hz 80 dB 1%
4 80 2 20-20,000 Hz 80 dB 1%
160 4 20-20,000 Hz 80 dB 1%

High-Mass Heat Sink: A heavy extruded aluminum heat sink is designed to keep the JL Audio JX series amplifier in a comfortable thermal range during demanding operation. This high-mass, extruded heat sink removes heat from the amplifier circuitry, extending high-power operation. This improves reliability and reduces the frequency of thermally related shut-down event.

Protection Circuitry: The JX360/4's protection circuitry automatically shuts the amplifier down if thermal limits are exceeded, a short-circuit is detected in the speaker wiring, or if low supply voltage limits are reached.

Status Indicator Lights: There are two status indicator lights on the right side of the amplifier.

  • Power (Green): This LED lights green to indicate that the amplifier is turned on and operating normally.
  • Protect (Red): The Protection LED lights Red to indicate the amplifier's protection circuitry has been activated to prevent product failure due to thermal overload, a short-circuit, or a dangerously low impedance connected to the amplifier's outputs.


Input Sensitivity: The four-channel amplifier's Input Sensitivity Control is used to match your source unit's output voltage to the input stage of the amplifier for maximum clean output. The JX360/4 is equipped with an independent Input Sensitivity Control for the Front (1/2) & Rear (3/4) channels.

  • Low-Level Input Range: 200mV-4V (RMS)
  • High-Level Input Range: 2V-10V (RMS)

Input Mode: This switch allows operation of all four amplifier channels with only one pair of input signals (2-CH Input Mode) or with independent front and rear input signal pairs (4-CH Input Mode).

Note: You will only need to connect the front RCA inputs when placing the amplifier in 2-CH input mode.

Variable Crossover: The variable filter design employed in the JX360/4's crossover section allows you to switch filter modes and change filter frequencies for the amplifier's Front (1/2) & Rear (3/4) channels. The JX360/4 offers the following crossover adjustments along the amp's side-panel.

  • Filter Mode: The amplifier allows you to select either a Low Pass, High Pass or Full-Range operation for the amplifier's Front (1/2) & Rear (3/4) channels.
  • Variable Frequency: You can set the amplifier's Low Pass or High Pass crossover from 50 to 200 Hz for the amplifier's Front (1/2) & Rear (3/4) channels.


Power/Ground/Turn-On Terminals: The four-channel amplifier features set-screw terminals for the power, ground, and remote turn-on connections.

  • Power and Ground: The JL Audio amplifier's set-screw Power and Ground connections are designed to accept 4 to 2 AWG power wire. A 2.5mm hex-wrench is supplied for making connections.
  • Remote Turn-On: The JL Audio JX series amplifier's set-screw turn-on lead will accept 18 to 8 AWG wire. The same 2.5mm hex-wrench is supplied for making connection.

Note: The Amplifier is not equipped with a fuse. An external 50-amp AFS, AGU, or MAXI fuse (not included) must be installed on the power wire. If a wiring kit is used which includes a fuse with a value other than 50-amps, the original should be replaced with a 50-amp fuse

Speaker Output Terminals: The JX360/4 amplifier's eight set-screw speaker terminals will accept 16 to 8 AWG speaker wire. The amplifier's speaker terminals can be wired in a 4-channel, 3-channel, or 2-channel configuration. A 2.5mm hex-wrench is supplied for making connections.

Preamp Inputs: The four-channel amplifier features two sets of stereo RCA input jacks. The amplifier features a dedicated Input Sensitivity gain control for the Front (1/2) & Rear (3/4) channel inputs. These controls are designed to match the input sensitivity of the JX360/4 to the specific signal source that is feeding it. The amplifier's low-level input can be set between 200mV-4V RMS.

Speaker Level Inputs: The JL Audio JX360/4 also accepts speaker level signals, including those from factory systems (without the need for a line-output converter), via two 10" speaker-level harnesses (included). The amplifier's high-level input can be set between 2V-10V RMS.

Preamp Outputs: The JX360/4 incorporates a pass-through preamp output sections, so that additional amplifiers can easily be connected to the same signal(s) feeding the four-channel amplifier. These preamp output signals are buffered to prevent noise and are always preamp level, regardless of the level of signals feeding the amplifier's inputs.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.