About the JL Audio TR050-CT
Transform your sound
Transform your sound
JL Audio's TR050-CT 1/2" textile dome tweeters can add focus and detail to the sound of your car's stereo system. Your music's high-frequency content plays an important part in creating a lively musical experience, especially in forming a strong stereo image. A well-placed set of tweeters can transform the sound in your vehicle.
You can flush- or surface-mount the TR050-CT tweeters in any convenient location. Ferrofluid cooling allows these tweeters to handle high-powered music and still maintain their smooth, clean sound. JL Audio includes in-line high-pass filters.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
Product highlights:
- 1/2" textile dome tweeters
- flush- and surface-mount hardware included
- in-line high-pass filter included (6 dB/octave)
- power handling: 2-50 watts RMS (125 watts peak power)
- frequency response: 4,000-22,000 Hz
- sensitivity: 91 dB
- flush-mount depth: 5/8"
- warranty: 1 year
- MFR # 92018
What's in the box:
JL Audio TR050-CT owner's manual
- 2 Tweeters with attached 7" wires (terminated with 2.8mm and 5.2mm female quick slides) each installed in flush-mount fixtures
- 2 Tweeter surface-mount fixtures
- Two 67" lengths of speaker wire with in-line high-pass filters for the tweeters (each has 2.8mm and 5.2mm female quick slides on the input end and 2.8mm and 5.2mm male quick slides on the tweeter end)
- 2 Machine screws (Length=1/4")
- 4 Self-tapping screws (Length=7/8")
- 2 Tweeter spring clips
- Owner's Manual
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for JL Audio TR050-CT
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JL Audio TR050-CT
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | 1/2" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Textile | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 91 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 4000 - 22k Hz | |
Minimum RMS Wattage | 10 | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 0 5/8 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 1 5/8 | |
Mounting Height (Inches) | 0.341 | |
Frame Width | 1.792 | |
Frame Length | 1.792 |
Product Research
Features
Tweeters: The TR050-CTi is a pair of 1/2" textile dome tweeters with integral phase plugs and powerful, ferro-fluid cooled and damped neodymium magnets. The tweeters come installed in flush-mount fixtures. For surface mounting, the flush-mount fixtures simply slide into the surface-mount fixtures. The tweeters do not swivel or angle in the flush-mount or surface-mount fixtures.
Tweeter Mounting Dimensions:
Mounting Fixture | Mounting Depth | Mounting Height | Frame Diameter | Cutout Diameter |
---|---|---|---|---|
Flush Mount | 0.6" (.6875" screw depth) | 0.341" | 1.792" | 1.578" |
Surface Mount | N/A (0.75" screw depth) | 1.083" | 1.837" | N/A |
Crossovers: The TR050-CTi tweeters use electrolytic capacitors on the in-line 1st order high-pass filters. The Polyswitch electronic tweeter protection circuit is designed to minimize the possibility of tweeter failure. It monitors current going to the tweeter and will disconnect the tweeter from the signal when it senses overload. Once the volume has been reduced, the protection circuit will reset itself automatically.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
These puppies are crystal clear and crispy. And I had a name brand tweeter before, now I can really see the highs! JL is always consistent.
ADavis from New Market, AL