About the JL Audio TR650-CSi
The next step in speaker quality
The next step in speaker quality
You need great speakers to turn the audio signals from your car stereo into music. The Evolution™ TR series component speakers take advantage of JL Audio's extensive research and obsessive testing to deliver excellent performance at prices any audio enthusiast can afford.
JL Audio's TR650-CSi component speaker system uses long-excursion 6-1/2" mica-filled polypropylene woofers for enhanced low-frequency response that'll do justice to your drums and bass. The separate 1/2" woven textile dome tweeters broadcast all the little details that bring your music to life. Ferrofluid cooled tweeters and butyl rubber surrounds mean that these component speakers will bring you great music for many years to come.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Priced per pair
Product highlights:
- component speaker system includes two 6-1/2" woofers, 2 tweeters, two in-line high-pass filters, and two woofer grilles
- mica-filled polypropylene woofer with butyl rubber surround
- 1/2" textile dome tweeter
- 4-ohm impedance
- 10-50 watts RMS power range
- frequency response: 59-25,000 Hz
- sensitivity: 91 dB
- woofer top-mount depth: 2-1/2"
- grilles included
- warranty: 1 year
- MFR # 91036
What's in the box:
JL Audio TR650-CSi owner's manual
- 2 Woofers
- 2 Tweeters with attached 7" wires terminated with 2.8mm and 5.2mm female quick slides (each installed in a fixed flush-mount adapter)
- 2 Tweeter surface-mount fixtures
- Two 67" lengths of speaker wire with in-line high-pass filters for the tweeters (has 2.8mm and 5.2mm female quick slides on the woofer end and 2.8mm and 5.2mm male quick slides on the tweeter end)
- 2 Crimp-on 5.2mm female quick slides
- 2 Crimp-on 2.8mm female quick slides
- 2 Machine screws (Length=1/4")
- 8 Self-tapping screws (Length=1-3/16")
- 8 Speed clips
- 4 Self-tapping screws (Length=7/8")
- 2 Tweeter spring clips
- 2 Woofer grilles
- 2 Grille frames
- Owner's Manual
- Woofer cutout template
Customer reviews for JL Audio TR650-CSi
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JL Audio TR650-CSi
Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 2-way | |
Tweeter Design | 1/2" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Textile | |
Woofer Composition | IM Mica-filled poly | |
Woofer Surround | Butyl rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 91 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 59 - 22k Hz | |
Minimum RMS Wattage | 10 | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 2 1/2 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 5/8 | |
Mounting Height (Inches) | 0.148 | |
Frame Width | 6.496 | |
Frame Length | 6.496 |
Product Research
Features
Woofers: The JL Audio Evolution TR650-CSi component speakers feature 6-3/4" injection-molded, mica-filled polypropylene cone woofers with 1" voice coils and flat-profile, symmetrical-roll spiders. The woofers feature long excursion and enhanced low-frequency extension for power, more realistic bass. The woofers use butyl rubber surrounds for reliability and strength.
Tweeters: The TR650-CSi has 1/2" textile dome tweeters with integral phase plugs and powerful, ferro-fluid cooled and damped neodymium magnets. You can mount the tweeters in the supplied flush-mount or surface-mount fixtures. The tweeters do not swivel or angle in the flush-mount or surface-mount fixtures.
Tweeter Mounting Dimensions:
Mounting Fixture | Mounting Depth | Mounting Height | Frame Diameter | Cutout Diameter |
---|---|---|---|---|
Flush Mount | 0.6" (.6875" screw depth) | 0.341" | 1.792" | 1.578" |
Surface Mount | N/A (0.75" screw depth) | 1.083" | 1.837" | N/A |
Crossovers: The TR650-CSi components use electrolytic capacitors on the in-line 1st order high-pass filters. The woofer is unfiltered, using its engineered smooth roll-off characteristics to blend with its tweeter. The Polyswitch electronic tweeter protection circuit is designed to minimize the possibility of tweeter failure. It monitors current going to the tweeter and will disconnect the tweeter from the signal when it senses overload. Once the volume has been reduced, the protection circuit will reset itself automatically.
Grilles: Two black metal mesh grilles and black ABS plastic grille frames are included with the speakers.
Loading...
Loading accessories...
Customer Q&A
4 questions already asked
Loading...
Loading articles...
good sounding speaker could use more bass but I'm putting in a 10 w3 so it wont matter. high and mid range sound great inline crossover on the tweater makes easy install. fit perfect in my factor monsoon speaker pods
JL is the best from phoenix, AZ