Tools are not included with this installation kit. The tools required to complete
the installation may include the following:
- Safety glasses
- Phillips screwdriver
- Slotted screwdriver
- 7/16" wrench
- 3/8" wrench
- Electric drill
- 1/8" drill bit
- 3/16" drill bit
- Pencil or marker
Installation Kit Owner's Manual: The Owner's Manual provides
instructions for installation and hints on selecting a mounting location.
Compass: Using the supplied compass, you can find the direction
to the satellite from your location.
RG-6 Coaxial Cables: 25' and 75' lengths of RG-6 cable are
provided to connect the satellite dish to your receiver, via the grounding block.
Typically, the 75' cable connects the satellite dish to the grounding block, and
the 25' cable runs from the grounding block to your receiver. Note:
If you wish to install two receivers, you will need two of each of these cables.
Expansion Anchors: Using the expansion anchors, you can mount
the dish on a surface of solid concrete or solid brick (not the mortar between the
bricks). Note: Use toggle anchors (not included in the kit) to
mount the dish on cinder or concrete block. Do not use expansion anchors for this
Lag Screws: Use the lag screws to mount the dish on a wood
surface or on the foundation material under a solid siding surface.
Grounding Block: For proper grounding, the RG-6 cable runs
from the grounding block to your satellite receiver. The RG-6 cable running from
the satellite dish to the grounding block has a messenger grounding wire, which
is also attached to the grounding block. Additionally, the aluminum grounding
wire runs from the grounding block to the grounding system. Note:
You must use a dual grounding block with a dual-output LNB.
Grounding Wire: Use the grounding wire to link the grounding
block to the grounding system. Note: You must use a similar wire
to link the mast to the grounding system. Please, follow the National Electrical
Code and all local electrical codes.
Silicone Sealant: Use the silicone sealant to seal any holes
you drill into the building when you wire the dish to the receiver.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.